|
|
Content .. 2259 2260 2261 2262 ..
ENGINE MAINTENANCE (MR16DDT) MA-79 < PERIODIC MAINTENANCE > C D E F G H I J K L M B MA N O A ENGINE MAINTENANCE (MR16DDT) DRIVE BELT DRIVE BELT : Exploded View INFOID:0000000011732668 DRIVE BELT : Removal and Installation INFOID:0000000011732669 REMOVAL 1. Turn the steering wheel to the right. 2. Remove the front fender protector (RH) front side bolts and clips. And keep a service area. Refer to . 3. Hold the hexagonal part (A) of drive belt auto-tensioner (1) with CAUTION: Avoid placing hand in a location where pinching may occur 4. Insert a rod approximately 6 mm (0.24 in) in diameter such as belt is removed. 5. Remove drive belt. INSTALLATION 1. Install drive belt. CAUTION: • Confirm drive belt is completely set to pulleys. pulley groove. 2. Release drive belt auto-tensioner, and apply tension to drive belt. 3. Turn crankshaft pulley clockwise several times to equalize tension between each pulley. 4. Confirm tension of drive belt at indicator (notch on fixed side) is within the possible use range. Refer to MA-79, "DRIVE BELT : Exploded View" . 1. Alternator 2. Drive belt auto-tensioner 3. Crankshaft pulley 4. A/C compressor 5. Water pump 6. Drive belt A. Possible use range B. Range when new drive belt is in- C. Indicator JPBIA4302ZZ JPBIA4351ZZ |