|
|
Content .. 1010 1011 1012 1013 ..
SR-26 < REMOVAL AND INSTALLATION > SATELLITE SENSOR SATELLITE SENSOR Exploded View INFOID:0000000010478328 Removal and Installation INFOID:0000000010478329 WARNING: • Before servicing, turn ignition switch OFF, disconnect battery negative terminal and wait 3 minutes or more. • Never use air tools or electric tools for servicing. SATELLITE SENSOR Removal 1. Remove center pillar lower garnish. Refer to INT-18, "Removal and Installation" . 2. Remove the satellite sensor nut. CAUTION: Never reuse the satellite sensor nut. 3. Disconnect the harness connector from the satellite sensor. 4. Remove satellite sensor. CAUTION: • Replace the satellite sensor if it has been dropped or sustained an impact. INSTALLATION Note the following item, and install in the reverse order of removal. CAUTION: • Never reuse the satellite sensor nut. 1. Center pillar 2. Satellite sensor for symbols in the figure. E1HIA0042GB |