|
|
содержание .. 947 948 949 950 ..
LAN STRG BRANCH LINE CIRCUIT LAN-53 < COMPONENT DIAGNOSIS > [CAN] C D E F G H I J K L B A O P N STRG BRANCH LINE CIRCUIT Diagnosis Procedure INFOID:0000000001162797 INSPECTION PROCEDURE 1. CHECK CONNECTOR 1. Turn the ignition switch OFF. 2. Disconnect the battery cable from the negative terminal. 3. Check the terminals and connectors of the steering angle sensor for damage, bend and loose connection Is the inspection result normal? YES >> GO TO 2. NO >> Repair the terminal and connector. 2. CHECK HARNESS FOR OPEN CIRCUIT 1. Disconnect the connector of steering angle sensor. 2. Check the resistance between the steering angle sensor harness connector terminals. Is the measurement value within the specification? YES >> GO TO 3. NO >> Repair the steering angle sensor branch line. 3. CHECK POWER SUPPLY AND GROUND CIRCUIT Check the power supply and the ground circuit of the steering angle sensor. Refer to . Is the inspection result normal? YES (Present error)>>Replace the steering angle sensor. Refer to BRC-186, "Removal and Installation" . YES (Past error)>>Error was detected in the steering angle sensor branch line. >> Repair the power supply and the ground circuit. Steering angle sensor harness connector Resistance ( Ω ) Connector No. Terminal No. M80 4 8 Approx. 54 – 66 |