|
|
содержание .. 757 758 759 760 ..
EXL-34 < COMPONENT DIAGNOSIS > HEADLAMP (HI) CIRCUIT Is the measurement value normal? YES >> GO TO 4 NO >> GO TO 3 3. CHECK HEADLAMP (HI) CIRCUIT FOR OPEN 1. Turn the ignition switch OFF. 2. Disconnect IPDM E/R connector. 3. Check continuity between the IPDM E/R harness connector (A) Does continuity exist? YES >> GO TO 4 NO >> Repair the harnesses or connectors. 4. CHECK FRONT COMBINATION LAMP (HI) GROUND CIRCUIT 1. Disconnect the front combination lamp connector. 2. Check continuity between the front combination lamp harness Does continuity exist? YES >> Inspect the headlamp bulb. NO >> Repair the harness. HEADLAMP (XENON) HEADLAMP (XENON) : Description INFOID:0000000001527565 The IPDM E/R (intelligent power distribution module engine room) controls the headlamp high relay based on HEADLAMP (XENON) : Component Function Check INFOID:0000000001527566 1. CHECK HEADLAMP (HI) OPERATION WITHOUT CONSULT-III 1. Start IPDM E/R auto active test. Refer to XX-XX, "*****" . 2. Check that the headlamp switches to the high beam. CONSULT-III 1. Select "EXTERNAL LAMP" of IPDM E/R active test item. 2. With operating the test items, check that the headlamp switches to the high beam. Does the headlamp switch to the high beam? YES >> Headlamp (HI) circuit is normal. NO >> Refer to EXL-35, "HEADLAMP (XENON) : Diagnosis Procedure" A B Continuity Connector Terminal Connector Terminal LH E47 55 E25 1 Yes RH 56 E26 WKIA5470E Connector Terminal — Continuity LH E25 2 Ground Yes RH E26 PKIC0961E HI : Headlamp switches to the high beam. OFF : Headlamp OFF |