|
|
содержание .. 457 458 459 460 ..
EC-486 < COMPONENT DIAGNOSIS > [HR16DE (WITHOUT EURO-OBD)] P0011 IVT CONTROL >> INSPECTION END Component Inspection INFOID:0000000001693233 1. CHECK INTAKE VALVE TIMING CONTROL SOLENOID VALVE-I 1. Turn ignition switch OFF. 2. Disconnect intake valve timing control solenoid valve harness connector. 3. Check resistance between intake valve timing control solenoid valve terminals as follows. Is the inspection result normal? YES >> GO TO 2. NO >> Replace intake valve timing control solenoid valve. 2. CHECK INTAKE VALVE TIMING CONTROL SOLENOID VALVE-II 1. Remove intake valve timing control solenoid valve. 2. Provide 12V DC between intake valve timing control solenoid CAUTION: Do not apply 12V DC continuously for 5 seconds or more. Is the inspection result normal? YES >> INSPECTION END NO >> Replace intake valve timing control solenoid valve. Terminals Resistance [at 20 ° C (68 ° F)] 1 and 2 6.7 - 7.7 Ω 1 or 2 and ground ∞
Ω (Continuity should not exist) JMBIA0350ZZ |