|
|
содержание .. 366 367 368 369 ..
EC-122 < COMPONENT DIAGNOSIS > [HR16DE (WITH EURO-OBD)] TROUBLE DIAGNOSIS - SPECIFICATION VALUE >> GO TO 22. 22. CHECK “A/F ALPHA-B1” 1. Start engine. 2. Select “A/F ALPHA-B1” in “SPEC” of “DATA MONITOR” mode, and make sure that the indication is within Is the measurement value within the SP value? YES >> Detect malfunctioning part of mass air flow sensor circuit and repair it. Refer to . Then GO TO 29. NO >> GO TO 23. 23. CHECK “MAS A/F SE-B1” Select “MAS A/F SE-B1” in “SPEC” of “DATA MONITOR” mode, and make sure that the indication is within the Is the measurement value within the SP value? YES >> GO TO 24. NO >> More than the SP value: Replace mass air flow sensor, and then GO TO 29. 24. REPLACE ECM 1. Replace ECM. 2. Go to EC-25, "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Special Repair Require- >> GO TO 29. 25. CHECK INTAKE SYSTEM Check for the cause of uneven air flow through mass air flow sensor. Refer to the following. Is the inspection result normal? YES >> GO TO 27. NO >> Repair or replace malfunctioning part, and then GO TO 26. 26. CHECK “B/FUEL SCHDL” Select “B/FUEL SCHDL” in “SPEC” of “DATA MONITOR” mode, and make sure that the indication is within the Is the measurement value within the SP value? YES >> INSPECTION END NO >> Less than the SP value: GO TO 27. 27. CHECK “MAS A/F SE-B1” Select “MAS A/F SE-B1” in “SPEC” of “DATA MONITOR” mode, and make sure that the indication is within the Is the measurement value within the SP value? YES >> GO TO 28. NO >> Less than the SP value: Replace mass air flow sensor, and then GO TO 30. 28. CHECK INTAKE SYSTEM Check for the cause of air leak after the mass air flow sensor. Refer to the following. valve |