|
|
содержание .. 55 56 57 58 ..
FRONT DISC BRAKE BR-35 < DISASSEMBLY AND ASSEMBLY > C D E G H I J K L M A B BR N O P Check sliding pins, sliding pin bolts and sliding pin boots for wear, damage, and cracks. Replace applicable ASSEMBLY CAUTION: When assembling, use only specified rubber lubricant. Apply polyglycol ether based lubricant to new piston seal and 2. Apply rubber grease to piston boot and apply brake fluid to pis- 3. Press piston into cylinder body by hand to assemble piston-side CAUTION: Press piston evenly and change pressing point to prevent 4. Install sliding pins and sliding pin boots to the torque member. 5. If pads, shims and pad retainers were removed, install them to torque member. Refer to and Installation of Brake Pad" 6. Install cylinder body to torque member. 7. Install sliding pin bolts. 8. Install caliper assembly to vehicle. Refer to BR-25, "Removal and Installation of Brake Caliper Assembly" . 9. Tighten sliding pin bolts to specified torque. Refer to . DISC ROTOR INSPECTION Visual Inspection Check surfaces of disc rotor for uneven wear, cracks, and serious damage. Replace applicable part as neces- Runout Inspection 1. Using wheel nuts, secure disc rotor to wheels hub 2 or more positions. SFIA2278E SFIA3074E SFIA2279E |