|
|
|
TEST ACTION APPLICABILITY 4 Turn the ignition off. All Yes → Go To 5 No → Repair the Engine Oil Sensor Signal circuit for a short to the Sensor Ground circuit. 5 Turn the ignition off. All Yes → Go To 6 No → Repair the Intake Air Pressure Sensor Signal circuit for a short to the Sensor Ground circuit. 6 Turn the ignition off. t, erase ECM DTCs. Turn the ignition off for 10 seconds. Turn the ignition on. t, read ECM DTCs. Does the DRB display this DTC? All Yes → Go To 7 No → Replace the Intake Air Pressure Sensor. Perform ROAD TEST VERIFICATION - VER-2. 7 Turn the ignition off. t, erase ECM DTCs. Turn the ignition off for 10 seconds. Turn the ignition on. t, read ECM DTCs. Does the DRB display this DTC? All Yes → Replace and program the Engine Control Module in accordance with the Service Information. No → Replace the Engine Oil Sensor. Perform ROAD TEST VERIFICATION - VER-2. 204 DRIVEABILITY - DIESEL P2332-SENSOR SUPPLY 3 VOLTAGE IS TOO LOW — Continued |