|
|
|
low-viscosity base oils are not permitted. The kinematic viscosity at 100°C 2 must be at least 9.5 mm /s. 2.2 Alternative transmission lubricants for commercial vehicle synchromesh transmissions which are If there are no gear oils according to Sheet 235.1 and 235.5 available, the following engine oils can also In a moderate climate, engine oils of SAE-grade 30 as per sheet 235.12 In tropical climate, engine oils of SAE-grade 40 as per sheet 235.12 2.3 Fully synthetic transmission oil, sheet 235.4 Completely synthetic gear oils are imperative for the Unimog manual transmission UG 3/40, UG 3/65 and The gear oils correspond to the ZF lubricant specifications TE-ML01 and TE-ML02 and are consequently 2.4 Transmission oils, sheet 235.5 The gear oils are approved for MB and ZF manual transmissions with steel/molybdenum synchronization, The transmission oils have a low chlorine content as well as a potential for lower oil temperatures under 2.5 Transmission oils, sheet 235.10 The partly synthetic gear oils are approved for the commercial vehicle manual transmission Model Due to the favorable viscosity/temperature characteristics, a very good cold-shifting response and, due to With regard to the use in passenger vehicle front-wheel drive manual transmissions/in-line transmissions,
2004 Mercedes-Benz ML350 1998-2005 GENINFO Overall vehicle - 163 Chassis
me
|