|
|
|
BR BR BR BR Brake Brake Brake Brake System System System System - 51- Removal/Installation Removal/Installation Removal/Installation Removal/Installation Installation Install the wheel hub onto the brake disc. Caution: Caution: Caution: Caution: The left hand side bearing adjusting nut is of left 2. Reinstall the hub bearing: � Reinstall the washer and brake disc assembly, � Reinstall the wheel bearing adjusting nut. 3. Reinstall the brake caliper. 4. Install the brake hose onto the shock absorber. 5. Check the front disc runout as required. 6. Set the axial clearance of wheel bearing: � Tighten the adjusting nut of wheel bearing and � Rotate the adjusting nut by 180 degree and � Push and pull the wheel horizontally to check 7. Use new split pin to reinstall the nut lock piece and 8. Reinstall the wheel. 9. Lower the vehicle.
|