Position of ignition key
音 "START"
The engine will start to run when the
ignition key is turned to this position.
Release the ignition key after the en鄄
gine starts running.
音 "ON"
When the ignition key is at "ON" posi鄄
tion, the engine will start to ignite and
all components will start to work. If
the engine does not work, the ignition
key should not be kept at "ON" posi鄄
tion, as this will result in spontaneous
discharge and may destroy the igni鄄
tion system.
音 "ACC"
When the ignition key is at "ACC" po鄄
sition, some electric devices (radio)
can work.
音 "LOCK"
The ignition key can be inserted or
pulled out at this position.
To prevent theft, the steering wheel
can be locked using the ignition key.
Pull out the ignition key
Warning院
音 Do not turn off the engine or
remove the key when the vehicle
is running, as the steering wheel
is close to the ignition key.
1. Turn the ignition key to "ACC"
position.
2. Press and turn the ignition key
from "ACC" to "LOCK" position
counterclockwise.
Note:
音 To release the steering
wheel, insert the ignition key and
turn the ignition key and steering
wheel concurrently.
Driving your vehicle
62
1. Turn the ignition key to "ACC" posi鄄
tion.
2. Press and turn the ignition key
from "ACC" to "LOCK" position coun鄄
terclockwise.
3. The ignition key can be pulled out
at the "LOCK" position.
Start
Operation of manual transmis鄄
sion
Use the clutch
Before shifting the gear, step on the
Caution院
音 When the shift lever is moved
from 5th gear to 4th gear, it is
possible to enter the 2nd gear
by mistake. This will cause the
engine speed to increase and
the speedometer will enter the
red area.
Warning院
音 Never start the engine in an
enclosed area or where there is
no sufficient space.
Carbon
monoxide is a tasteless gas and
can cause serious injury or death.
Note:
音 The shift lever can be moved
to the reverse position only after
the
vehicle
is
completely
stopped and 3 seconds after the
shift has been moved to the
neutral position.
63