|
|
Engine Control System (4JH1) 6E-155 19 Important: Replace the ECM. Refer to Engine Control Module Did you complete the replacement? — Go to Step 20 — 20 1. Reconnect all previously disconnected fuse or 2. Clear the DTCs with the Tech 2. 3. Turn ON the ignition, with the engine OFF. 4. Observe the Brake Pedal 1 Switch and the Does the Tech 2 indicate Applied when the brake — Go to Step 21 Go to Step 2 21 Observe the DTC Information with the Tech 2. Are there any DTCs that you have not diagnosed? — Go to Diagnostic Trouble Code (DTC) List System OK Step Action Value(s) Yes No |