|
|
00-44 SERVICE INFORMATION 3. Apply a thin coat of engine oil to the O-rings. 4. Install the filter assemblies. Carefully turn each assembly clockwise until the O- 5. Use the filter wrench to turn in each filter assembly an additional 1/3 to 2/3 of turn. 6. Operate the priming pump on the fuel filter to bleed the fuel system. Pre-fuel Filter Water Draining Procedure The indicator light will come on when the water level in 1. Place the end of a vinyl hose (beneath the drain plug) in a container. 2. Loosen the air intake plug and drain plug, then drain water. 3. After draining, securely tighten the drain plug and air intake plug. 4. Then, operate the priming pump on the injection pump to bleed the fuel system. 5. After starting the engine, check to see that no fuel leaks from the drain plug. Injection Nozzle Pressure and Spray Condition Check 1. Use a nozzle tester to check the injection nozzle opening pressure. N6A0024E N6A0014E N6A0026E N6A0027E |