淤 Turn indicator lamp (
)
when the turning control handle is in
the left (right) turning position, left
(right) turning indicator lamp flashes.
If the warning switch is pressed, the
left and right turning indicator lamps
flash at the same time.
于 High beam indicator lamp (
)
indicates whether the headlamp is in
the status of high beam or not. When
the headlamp is in high beam status,
the indicator lamp lights.
盂 Fuel warning lamp (
): fuel
level alarm, when the fuel is in short鄄
age, fuel alarm lamp lights.
榆 Parking brake indicator lamp
渊
冤 院 Wh en pull up the parking
brake handle, the indicator lamp
lights.
虞Generator indicator(
)院Indi鄄
cates working condition of the gen鄄
erator. When the accumulator is dis鄄
charging, the indicator lamp lights;
while the accumulator is charging,
the indicator lamp goes out.
愚Oil pressure indicator lamp (
)院
Indicates engine oil pressure. When
engine oil pressure is lower than
7.84 伊104Pa, the indicator lamp
lights袁When engine oil pressure is
higher than this value, the indicator
lamp goes out.
舆 Braking fault indicator lamp渊
冤院
When braking fluid is not enough, the
indicator lamp lights.
余 Exhaust assistant brake indicator
lamp 渊
冤院When exhaust assistant
braking operates, the indicator lamp
lights. When exhaust assistant brake
is disconnected, the indicator lamp
goes out.
俞 Fog lamp indicator lamp渊
冤院
When braking fluid is not enough, the
indicator lamp lights.
逾 Small light indicator lamp渊
冤院
When they work 袁the indicator lamp
lights.
6) Start of choking device
This is a device that controls switch
of fuel cutoff mechanism; it is con鄄
trolled by ignition lock and driven by
electromotor as well as installed near
the engine. When the ignition lock is
turned to 野ON冶 position, choking de鄄
vice starts to work, fuel cutoff device
is connected and the engine is able
to start. If you want to stop the en鄄
gine, turn the ignition key to 野ACC冶
or 野LOCK冶 to shut the fuel cutoff
mechanism, then the oil way is cut
off and the engine quenches.
7) Brake pedal
When the brake pedal is depressed,
four front and rear wheels are
stopped at the same time to stop the
vehicle or decelerate, and the brake
light switch of the brake pedal is
connected and brake light at back of
the vehicle lights.
8) Clutch pedal
When shift during start or running,
you should depress the clutch pedal
to separate the clutch at first, which
will turn the shift control lever into
needed position and prevent gear
wheels from serious bumping.
9) Accelerator pedal
Accelerator pedal controls oil supply
of high-pressure oil pump of engine,
more heavily you depress the pedal,
more oil is supplied, which leads to
accelerating.
10) Parking brake control lever
Tensing the parking brake control
lever backwards will stop the vehicle
and prevent the vehicle from sliding;
at this time, parking brake indicator
lamp on the instrument panel lights.
11) Air- conditioner渊optional冤
11.1) Brief description
The automobile air -conditioner that
has both cool wind and warm wind is
integrated with the automobile in鄄
strument panel. It has multiple func鄄
tions such as supplying cool wind
and warm wind, defrosting, supply鄄
ing cool and warm wind at the same
time. There are four high and low
steps of the wind supply system.
Users can choose the wind volume
according to necessity as well as
choose the direction of wind blowing.
Air-conditioner of this vehicle is de鄄
signed properly and has a compact
structure and excellent performance
as well as operates easily, installs
and maintains conveniently.
8
9
HFC1045
series trucks