|
|
Content .. 1197 1198 1199 1200 ..
SRS CONTROL SYSTEM 9C-43 Step Action Value YES NO 1 Has the “SRS system check” been per- — Go to “SRS sys- tem check”. 2 1. When measurement is required in this chart, use 5-8840-0366-0 DMM and ap- 2. Turn the starter switch to OFF. SRS coil assembly located in the lower Is the 2-pole connector (yellow) connected — Connect the 2- pole connector of SRS coil assem- bly properly.Go to 3 1. Remove the 2-pole connector (yellow) of SRS coil assembly located in the lower 2. If it is normal, reconnect the 2-pole con- nector of SRS coil assembly properly. 3. Turn the starter switch to ON. Is DTC 26 detected as current trouble? — 4 1. Turn the starter switch to OFF. SRS coil assembly located in the lower 3. Connect the 5-8840-2421-0 SRS substi- tute load and an appropriate terminal 4. Turn the starter switch to ON. Is DTC 26 detected as current trouble? — 5 1. Turn the starter switch to OFF. open. 3. Inspect the SRS airbag deployment cir- cuit and SRS control unit connector ter- Is the trouble detected? — Replace the SRS harness.Go to Go to Chart A SRS control unit function check. |