|
|
6E2–271 RODEO 6VD1 3.2L ENGINE DRIVEABILITY AND EMISSIONS DTC P0327 – KS Sensor Circuit (Cont'd) Step No Yes Value(s) Action 9 1. Ignition “OFF,” PCM disconnected. the PCM connector and engine ground. 3. Tap on the engine lift bracket with a socket extension while observing the signal indicated on Is any signal indicated on the DVM while tapping on the — Go to Step 11 Go to Step 10 10 Replace the knock sensor. Is the action complete? — Verify repair — 11 Replace the PCM. IMPORTANT: The replacement PCM must be On-Vehicle Service in Powertrain Control Module and Sensors for And also refer to latest service bulletin. Check to see if the Latest software is released or not. Is the action complete? — Verify repair — |