Infiniti QX55 (2023 year). Manual in english - page 16

 

  Index      Manuals     Infiniti QX55 (2023 year). Manual in english

 

Search            copyright infringement  

 

   

 

   

 

Content      ..     14      15      16     

 

 

 

 

Infiniti QX55 (2023 year). Manual in english - page 16

 

 

78,750 miles/(126,000 km)/
126 months

Perform at number of miles, kilometers or
months, whichever comes first.

Standard maintenance:

Inspections:
• Horn, lights, signals, wipers, rear hatch/

hood lift supports

• All fluids inspected (engine, wiper, brake,

power steering, coolant)

• Engine drive belts
• Hose inspections
• Engine air filter
• Suspension

components

(shocks,

sub-

frame, tie rods)

• Battery terminals and cables, battery test
• Tire pressure, treadwear and depth
• Differential oil (AWD models)

Essentials:
• Replace in-cabin microfilter
• Replace Intelligent Key battery

Severe use maintenance:

Inspections:
• Brake pads & rotors
• Exhaust system
• Propeller shaft (AWD models)
• Drive shaft boots
• Steering gear and linkage
• Axle & suspension parts

82,500 miles/(132,000 km)/
132 months

Perform at number of miles, kilometers or
months, whichever comes first.

Standard maintenance:

Inspections:
• Brake lines & cables
• Brake pads & rotors
• CVT fluid
• Engine drive belts*
• Propeller shaft (AWD models)
• Drive shaft boots
• Transfer case oil (AWD models)
• Differential oil (AWD models)
• Horn, lights, signals, wipers, rear hatch/

hood lift supports

• All fluids inspected (engine, wiper, brake,

power steering, coolant)

• Hose inspections
• Engine air filter
• Suspension

components

(shocks,

sub-

frame, tie rods)

• Battery terminals and cables, battery test
• Tire pressure, treadwear and depth

9-22

Maintenance and schedules

CarManuals2.com

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Essentials:
• Replace engine oil & filter (1)
• Tire rotation

Severe use maintenance:

Inspections:
• Brake pads & rotors
• Exhaust system
• Propeller shaft (AWD models)
• Drive shaft boots
• Steering gear and linkage
• Axle & suspension parts

Essentials:
• Replace brake fluid

(1) If the oil replacement indicator is dis-
played, change the engine oil and filter within
two weeks or less than 500 miles (800 km).

* Maintenance items and intervals with “ * ”
are recommended by INFINITI for reliable
vehicle operation. The owner need not per-
form such maintenance in order to maintain
the emission warranty or manufacturer recall
liability. Other maintenance items and inter-
vals are required.

86,250 miles/(138,000 km)/
138 months

Perform at number of miles, kilometers or
months, whichever comes first.

Standard maintenance:

Not applicable. Proceed to next interval.

Severe use maintenance:

Inspections:
• Brake pads & rotors
• Exhaust system
• Propeller shaft (AWD models)
• Drive shaft boots
• Steering gear and linkage
• Axle & suspension parts
• Horn, lights, signals, wipers, rear hatch/

hood lift supports

• All fluids inspected (engine, wiper, brake,

power steering, coolant)

• Engine drive belts
• Hose inspections
• Engine air filter

• Suspension

components

(shocks,

sub-

frame, tie rods)

• Battery terminals and cables, battery test
• Tire pressure, treadwear and depth
• Differential oil (AWD models)

Maintenance and schedules

9-23

CarManuals2.com

-------------------------------------------------------------------------------------------------------------------------------------------------------------

90,000 miles/(144,000 km)/
144 months

Perform at number of miles, kilometers or
months, whichever comes first.

Standard maintenance:

Inspections:
• Brake lines & cables
• Brake pads & rotors
• CVT fluid
• Engine drive belts*
• Fuel tank vapor vent system*
• Fuel lines/connections*
• Exhaust system
• Steering gear and linkage
• Axle & suspension parts
• Propeller shaft (AWD models)
• Drive shaft boots
• Transfer case oil (AWD models) (3)
• Differential oil (AWD models) (3)
• Horn, lights, signals, wipers, rear hatch/

hood lift supports

• All fluids inspected (engine, wiper, brake,

power steering, coolant)

• Hose inspections
• Suspension

components

(shocks,

sub-

frame, tie rods)

• Battery terminals and cables, battery test
• Tire pressure, treadwear and depth

Essentials:
• Replace engine oil & filter (1)
• Replace engine air filter (2)
• Replace brake fluid
• Replace in-cabin microfilter
• Replace Intelligent Key battery
• Tire rotation

Severe use maintenance:

Inspections:
• Brake pads & rotors
• Exhaust system
• Propeller shaft (AWD models)
• Drive shaft boots
• Steering gear and linkage
• Axle & suspension parts

Essentials:
• Replace brake fluid

(1) If the oil replacement indicator is dis-
played, change the engine oil and filter within
two weeks or less than 500 miles (800 km).

(2) If operating mainly in dusty conditions,
more frequent maintenance may be required.

(3) If using a car-top carrier, or driving on
rough or muddy roads, change (not just in-
spect) oil every 20,000 miles (32,000 km) or
24 months.

* Maintenance items and intervals with “ * ”
are recommended by INFINITI for reliable
vehicle operation. The owner need not per-
form such maintenance in order to maintain
the emission warranty or manufacturer recall
liability. Other maintenance items and inter-
vals are required.

9-24

Maintenance and schedules

CarManuals2.com

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Additional information

NOTE FOR ENGINE COOLANT *:
(1) First replacement interval is 105,000
miles (168,000 km) or 84 months. After
first replacement, replace every 75,000
miles (120,000 km) or 60 months.
(2) Use only Genuine NISSAN Long Life
Antifreeze/Coolant (blue) or equivalent
with proper mixture ratio of 50%
antifreeze and 50% demineralized or
distilled water. Mixing any other type of
coolant or the use of non-distilled water
may reduce the life expectancy of the
factory fill coolant.
* Maintenance items and intervals with “ *
” are recommended by INFINITI for
reliable vehicle operation. The owner need
not perform such maintenance in order to
maintain the emission warranty or
manufacturer recall liability. Other
maintenance items and intervals are
required.
NOTE FOR SPARK PLUGS:
(1) Replace every 105,000 miles
(168,000 km)
(2) Replace spark plug when the plug gap
exceeds 0.045 in (1.25 mm) even if within
specified replacement mileage.

Maintenance and schedules

9-25

CarManuals2.com

-------------------------------------------------------------------------------------------------------------------------------------------------------------

10 Technical and consumer information

Recommended fluids/lubricants and capacities . . 10-2

Fuel recommendation . . . . . . . . . . . . . . . . . . . . . . . 10-3
Engine oil and oil filter recommendations . . . . . 10-6
Air conditioner system refrigerant and oil
recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-7

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-8

Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-8
Wheels and tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-9
Dimensions and weights . . . . . . . . . . . . . . . . . . . . 10-9

When traveling or registering in another
country . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-10
Vehicle identification . . . . . . . . . . . . . . . . . . . . . . . . . . 10-10

Vehicle Identification Number (VIN) plate . . . 10-10
Vehicle identification number
(chassis number) . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-10
Engine serial number . . . . . . . . . . . . . . . . . . . . . . . 10-11
F.M.V.S.S./C.M.V.S.S. certification label . . . . . 10-11
Emission control information label . . . . . . . . . . 10-11
Tire and Loading Information label . . . . . . . . . . 10-12
Air conditioner specification label . . . . . . . . . . . 10-12

Installing front license plate . . . . . . . . . . . . . . . . . . . . 10-13
Vehicle loading information . . . . . . . . . . . . . . . . . . . . 10-15

Terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-15
Vehicle load capacity . . . . . . . . . . . . . . . . . . . . . . . 10-16
Securing the load . . . . . . . . . . . . . . . . . . . . . . . . . . 10-18
Loading tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-18
Measurement of weights . . . . . . . . . . . . . . . . . . . 10-19

Towing a trailer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-19

Flat towing for all–wheel drive vehicle . . . . . . 10-20

Uniform tire quality grading . . . . . . . . . . . . . . . . . . . 10-21
Emission control system warranty . . . . . . . . . . . . . 10-22
Reporting safety defects . . . . . . . . . . . . . . . . . . . . . . 10-22
Readiness for Inspection/Maintenance (I/M)
test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-24
Event Data Recorders (EDR) . . . . . . . . . . . . . . . . . . 10-24

Additional Data Recording (on vehicles
equipped with optional ProPILOT Assist) . . . 10-25

Owner's Manual/Service Manual order
information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-26

CarManuals2.com

-------------------------------------------------------------------------------------------------------------------------------------------------------------

The following are approximate capacities. The actual refill capacities may be slightly different. When refilling, follow the procedure described
in the “Do-it-yourself” section to determine the proper refill capacity.

Fluid Type

Capacity (approximate)

Recommended Fluids/Lubricants

Metric

Measure

US

Measure

Imperial

Measure

Fuel

60 L

15-7/8 gal

13-1/4 gal

• For additional information, see “Fuel recommendation” (P. 10-3).

Engine oil*1
Drain and refill
*1 For additional information,
see “Engine oil” (P. 8-6).

With oil filter

change

4.7 L

5 qt

4-1/8 qt

• Genuine “NISSAN Motor Oil 0W-20 SP” (or equivalent) is recom-
mended.
• If the above motor oil (or engine oil) is not available, a synthetic
0W-20 GF-6 SP motor oil (or engine oil) may be used. Damage caused
by the use of motor oil (or engine oil) other than as recommended is not
covered under INFINITI’s New Vehicle Limited Warranty. For addi-
tional information, see “Engine oil and oil filter recommendations”
(P. 10-6).

Without oil filter

change

4.6 L

4-7/8 qt

4 qt

Engine coolant
(with reservoir)

7.7 L

2 gal

1-3/4 gal

• Pre-diluted Genuine NISSAN Long Life Antifreeze/Coolant (blue) or
equivalent

Continuously Variable Transmission (CVT) fluid

• Genuine NISSAN CVT Fluid NS-3
• INFINITI recommends using Genuine NISSAN CVT Fluid NS-3 (or
equivalent) ONLY in INFINITI CVTs. Do not mix with other fluids. Using
fluids that are not equivalent to Genuine NISSAN CVT Fluid NS-3 may
damage the CVT. Damage caused by the use of fluids other than as
recommended is not covered under INFINITI’s New Vehicle Limited
Warranty outlined in your Warranty Information Booklet.

Differential gear oil

• Genuine NISSAN HYPOID FLUID•S1 GL-5 75W-80 or equivalent

Transfer oil

• Genuine NISSAN Differential Oil Hypoid Super GL-5 80W-90 or
equivalent conventional (non-synthetic) oil

Brake fluid

• Genuine NISSAN Super Heavy Duty Brake Fluid*2 or equivalent DOT
3.
*2: Available in mainland U.S.A. through an INFINITI retailer

Multi-purpose grease

• NLGI No. 2 (Lithium Soap base)

RECOMMENDED FLUIDS/
LUBRICANTS AND CAPACITIES

10-2

Technical and consumer information

CarManuals2.com

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Fluid Type

Capacity (approximate)

Recommended Fluids/Lubricants

Metric

Measure

US

Measure

Imperial

Measure

Air conditioning system refrigerant

• HFO-1234yf (R-1234yf)
• For additional information, see “Air conditioner system refrigerant and
oil recommendations” (P. 10-7).

Air conditioning system oil

• Genuine NISSAN A/C System oil Type PAG (ND-OIL12) or equivalent
• For additional information, see “Air conditioner system refrigerant and
oil recommendations” (P. 10-7).

Windshield-washer fluid

5 L

1-3/8 gal

1-1/8 gal

• Genuine NISSAN Windshield Washer Concentrate Cleaner & Anti-
freeze fluid or equivalent

FUEL RECOMMENDATION

Use unleaded premium gasoline with an oc-
tane rating of at least 91 AKI (Anti-Knock
Index) number (Research octane number 96).

If unleaded premium gasoline is not available,
unleaded regular gasoline with an octane rat-
ing of at least 87 AKI number (Research oc-
tane number 91) may be temporarily used,
but only under the following precautions:
• Have the fuel tank filled only partially with

unleaded regular gasoline, and fill up with
unleaded premium gasoline as soon as
possible.

• Avoid full throttle driving and abrupt

acceleration.

Use unleaded premium gasoline for maxi-
mum vehicle performance.

CAUTION

Using a fuel other than that specified
could adversely affect the emission con-
trol system, and may also affect the war-
ranty coverage.

Under no circumstances should a leaded
gasoline be used, because this will dam-
age the three-way catalyst.

Do not use a fuel containing more than
15% ethanol in your vehicle. Your vehicle
is not designed to run on a fuel contain-
ing more than 15% ethanol. Using a fuel
containing more than 15% ethanol in a
vehicle not specifically designed for a
fuel containing more than 15% ethanol
can adversely affect the emission control
devices and systems of the vehicle. Dam-
age caused by such fuel is not covered by
the

INFINITI

New

Vehicle

Limited

Warranty.

Technical and consumer information

10-3

CarManuals2.com

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Do not use fuel that contains the octane
booster methylcyclopentadienyl manga-
nese tricarbonyl (MMT). Using fuel con-
taining MMT may adversely affect ve-
hicle performance and vehicle emissions.
Not all fuel dispensers are labeled to in-
dicate MMT content, so you may have to
consult your gasoline retailer for more
details. Note that Federal and California
laws prohibit the use of MMT in refor-
mulated gasoline.

U.S. government regulations require
ethanol dispensing pumps to be identi-
fied by a small, square, orange and black
label with the common abbreviation or
the appropriate percentage for that
region.

Gasoline specifications

INFINITI recommends using gasoline that
meets

the

World-Wide

Fuel

Charter

(WWFC) specifications where it is available.
Many of the automobile manufacturers de-
veloped this specification to improve emis-
sion control system and vehicle performance.
Ask your service station manager if the gaso-
line meets the WWFC specifications.

Reformulated gasoline

Some fuel suppliers are now producing refor-
mulated gasolines. These gasolines are spe-
cially designed to reduce vehicle emissions.
INFINITI supports efforts towards cleaner air
and suggests that you use reformulated
gasoline when available.

Gasoline containing oxygenates

Some fuel suppliers sell gasoline containing
oxygenates such as ethanol, MTBE and
methanol with or without advertising their
presence. INFINITI does not recommend the
use of fuels of which the oxygenate content
and the fuel compatibility for your INFINITI
cannot be readily determined. If in doubt, ask
your service station manager.

If you use oxygenate-blend gasoline, please
take the following precautions as the usage
of such fuels may cause vehicle performance
problems and/or fuel system damage.

The fuel should be unleaded and have an
octane rating no lower than that recom-
mended for unleaded gasoline.

If an oxygenate-blend other than metha-
nol blend is used, it should contain no more
than 15% oxygenate.

If a methanol blend is used, it should con-
tain no more than 5% methanol (methyl
alcohol, wood alcohol). It should also con-
tain a suitable amount of appropriate co-
solvents and corrosion inhibitors. If not
properly formulated with appropriate co-
solvents and corrosion inhibitors, such
methanol blends may cause fuel system
damage and/or vehicle performance prob-
lems. At this time, sufficient data is not
available to ensure that all methanol
blends are suitable for use in INFINITI
vehicles.

If any driveability problems such as engine
stalling and difficult hot-starting are experi-
enced after using oxygenate-blend fuels, im-
mediately change to a non-oxygenate fuel or
a fuel with a low blend of MTBE.

Take care not to spill gasoline during refuel-
ing. Gasoline containing oxygenates can
cause paint damage.

10-4

Technical and consumer information

CarManuals2.com

-------------------------------------------------------------------------------------------------------------------------------------------------------------

E–15 fuel

E-15 fuel is a mixture of approximately 15%
fuel ethanol and 85% unleaded gasoline.
E-15 can only be used in vehicles designed to
run on E-15 fuel. U.S. government regula-
tions require fuel ethanol dispensing pumps
to be identified with small, square, orange
and black label with the common abbrevia-
tion or the appropriate percentage for that
region.

E–85 fuel

E-85 fuel is a mixture of approximately 85%
fuel ethanol and 15% unleaded gasoline.
E-85 can only be used in a Flexible Fuel Ve-
hicle (FFV). Do not use E-85 in your vehicle.
U.S. government regulations require fuel
ethanol dispensing pumps to be identified by
a small, square, orange and black label with
the common abbreviation or the appropriate
percentage for that region.

Fuel containing MMT

MMT, or methylcyclopentadienyl manganese
tricarbonyl, is an octane boosting additive.
INFINITI does not recommend the use of fuel
containing MMT. Such fuel may adversely
affect vehicle performance, including the
emissions control system. Note that while
some fuel pumps label MMT content, not all
do, so you may have to consult your gasoline
retailer for more details.

Aftermarket fuel additives

INFINITI does not recommend the use of any
aftermarket fuel additives (for example, fuel
injector cleaner, octane booster, intake valve
deposit removers, etc.) which are sold com-
mercially. Many of these additives intended
for gum, varnish or deposit removal may con-
tain active solvents or similar ingredients that
can be harmful to the fuel system and engine.

Octane rating tips

Using unleaded gasoline with an octane rat-
ing lower than recommended can cause per-
sistent, heavy “spark knock.” (“Spark knock”
is a metallic rapping noise.) If severe, this can
lead to engine damage. If you detect a per-
sistent heavy spark knock even when using
gasoline of the stated octane rating, or if you
hear steady spark knock while holding a
steady speed on level roads, it is recom-
mended that you have an INFINITI retailer
correct the condition. Failure to correct the
condition is misuse of the vehicle, for which
INFINITI is not responsible.

Incorrect ignition timing may result in spark
knock, after-run and/or overheating, which
may cause excessive fuel consumption or en-
gine damage. If any of the above symptoms
are encountered, have your vehicle checked.
It is recommended that you visit an INFINITI
retailer.

However, now and then you may notice light
spark knock for a short time while accelerat-
ing or driving up hills. This is not a cause for
concern, because you get the greatest fuel
benefit when there is light spark knock for a
short time under heavy engine load.

Technical and consumer information

10-5

CarManuals2.com

-------------------------------------------------------------------------------------------------------------------------------------------------------------

ENGINE OIL AND OIL FILTER
RECOMMENDATIONS

Selecting the correct oil

It is essential to choose the correct grade,
quality and viscosity engine oil to ensure sat-
isfactory engine life and performance. For
additional information, see "Recommended
fluids/lubricants and capacities" (P. 10-2).
INFINITI recommends the use of an energy
conserving oil in order to improve fuel
economy.

Select only engine oils that meet the Ameri-
can Petroleum Institute (API) certification or
International Lubricant Standardization and
Approval Committee (ILSAC) certification
and SAE viscosity standard. These oils have
the API certification mark on the front of the
container. Oils which do not have the speci-
fied quality label should not be used as they
could cause engine damage.

Oil additives

INFINITI does not recommend the use of oil
additives. The use of an oil additive is not
necessary when the proper oil type is used
and maintenance intervals are followed.

Oil which may contain foreign matter or has
been previously used should not be used.

Oil viscosity

The engine oil viscosity or thickness changes
with temperature. Because of this, it is impor-
tant to select the engine oil viscosity based on
the temperatures at which the vehicle will be
operated before the next oil change. Choos-
ing an oil viscosity other than that recom-
mended could cause serious engine damage.

Selecting the correct oil filter

Your new INFINITI vehicle is equipped with a
high-quality Genuine NISSAN oil filter. When
replacing, use a Genuine NISSAN oil filter or
its equivalent for the reason described in
“Change intervals”.

Change intervals

The oil and oil filter change intervals for your
engine are based on the use of the specified
quality oils and filters. Using engine oil and
filters that are not of the specified quality, or
exceeding recommended oil and filter change
intervals could reduce engine life.

LTI2587

10-6

Technical and consumer information

CarManuals2.com

-------------------------------------------------------------------------------------------------------------------------------------------------------------

CAUTION

Damage to engine caused by improper
maintenance or use of incorrect oil and fil-
ter quality and/or viscosity is not covered
by the INFINITI New Vehicle Limited
Warranty.

Your engine was filled with a high-quality
engine oil when it was built. You do not have
to change the oil before the first recom-
mended change interval. Oil and filter change
intervals depend upon how you use your
vehicle.

Operation under the following conditions
may require more frequent oil and filter
changes:
• repeated short distance driving at cold out-

side temperatures

• driving in dusty conditions
• extensive idling
• stop and go commuting

For additional information on maintenance
schedules, refer to the “Maintenance and
schedules” section of this manual.

AIR CONDITIONER SYSTEM
REFRIGERANT AND OIL
RECOMMENDATIONS

The air conditioner system in your INFINITI
vehicle must be charged with the refrigerant
HFO-1234yf

(R-1234yf)

and

the

oil,

Genuine NISSAN A/C System Oil Type PAG
(ND-OIL12) or the exact equivalents.

CAUTION

The use of any other refrigerant or oil will
cause severe damage to the air condition-
ing system and will require the replacement
of all air conditioner system components.

The refrigerant HFO-1234yf (R-1234yf) in
your INFINITI vehicle does not harm the
earth's ozone layer. Although this refrigerant
does not affect the earth's atmosphere, cer-
tain government regulations require the re-
covery and recycling of any refrigerant during
automotive air conditioner system service. Air
conditioner system should only be serviced by
trained and certified technicians to ensure
proper and safe operation (SAE J2845). An
INFINITI retailer has the trained technicians
and equipment needed to recover and recycle
your air conditioner system refrigerant. Only
new and SAEJ2842 certified evaporator(s)
shall be used as replacement parts.

A damaged or leaking air conditioning evapo-
rator shall never be repaired or replaced with
one removed from a used or salvaged vehicle.
To replace a damaged or leaking evaporator,
use only new and SAE J2842 certified
evaporator(s). It is recommended that you
visit an INFINITI retailer when servicing your
air conditioner system.

Technical and consumer information

10-7

CarManuals2.com

-------------------------------------------------------------------------------------------------------------------------------------------------------------

ENGINE

Model

2.0L 4 cylinder (KR20DDET engine model)

Type

Gasoline, 4-cycle, DOHC

Cylinder arrangement

4-cylinder, inline

Bore x Stroke

when compression ratio = 8

Metric measure

84.0 mm x 90.1 mm

US measure

3.307 in x 3.547 in

when compression ratio = 14

Metric measure

84.0 mm x 88.9 mm

US measure

3.307 in x 3.500 in

Displacement

when compression ratio = 8

Metric measure

1,997 cm

3

US measure

121.86 cu in

when compression ratio = 14

Metric measure

1,970 cm

3

US measure

120.22 cu in

Firing order

1–3–4–2

Idle speed

No adjustment is necessary.

CVT in N (Neutral) position

Ignition timing (degree B.T.D.C. at idle speed)

CO % at idle

Spark plug

DILKAR7N9HG

Spark plug gap (Nominal)

Metric measure

0.9 mm

US measure

0.035 in

Camshaft operation

Timing chain

This spark ignition system complies with the Canadian standard ICES-002.

SPECIFICATIONS

10-8

Technical and consumer information

CarManuals2.com

-------------------------------------------------------------------------------------------------------------------------------------------------------------

WHEELS AND TIRES

Wheel type

Offset
Metric
Measure

Offset
US
Measure

Size

Aluminum

44 mm

1.73 in

20 x 8.5J

Tire size

P255/45RF20

Spare tire

Not equipped

DIMENSIONS AND WEIGHTS

Metric
Measure

US
Measure

Overall length

with license plate bracket

4,732 mm

186.3 in

Overall width

without mirrors

1,903 mm

74.9 in

with mirrors

2,161 mm

85.1 in

Overall height

to SAT antenna top

1,619 mm

63.7 in

Front track

1,625 mm

64.0 in

Rear track

1,620 mm

63.8 in

Wheelbase

2,800 mm

110.2 in

Gross vehicle weight rating

Refer to the
“F.M.V.S.S./
C.M.V.S.S.
certification label”
on the center pillar
between the driver's
side front and rear
doors.

Gross axle weight rating

Front

Rear

Technical and consumer information

10-9

CarManuals2.com

-------------------------------------------------------------------------------------------------------------------------------------------------------------

When planning to drive your INFINITI ve-
hicle in another country,

you should first find

out if the fuel available is suitable for your
vehicle's engine.

Using fuel with an octane rating that is too
low may cause engine damage. All gasoline
vehicles must be operated with unleaded
gasoline. Therefore, avoid taking your vehicle
to areas where appropriate fuel is not
available.

When transferring the registration of your
vehicle to another country, state, province
or district,

it may be necessary to modify the

vehicle to meet local laws and regulations.

The laws and regulations for motor vehicle
emission control and safety standards vary
according to the country, state, province or
district; therefore, vehicle specifications may
differ.

When any vehicle is to be taken into another
country, state, province or district and reg-
istered, its modifications, transportation,
and registration are the responsibility of the
user. INFINITI is not responsible for any in-
convenience that may result.

VEHICLE IDENTIFICATION
NUMBER (VIN) PLATE

The VIN plate is located as shown. This num-
ber is the identification for your vehicle and is
used in the vehicle registration.

The VIN number is also available through the
center display screen. For additional informa-
tion, refer to the separate INFINITI InTouch™
Owner's Manual.

VEHICLE IDENTIFICATION
NUMBER (chassis number)

The vehicle identification number is located
as shown.

LTI2050

LTI2332

WHEN TRAVELING OR
REGISTERING IN ANOTHER
COUNTRY

VEHICLE IDENTIFICATION

10-10

Technical and consumer information

CarManuals2.com

-------------------------------------------------------------------------------------------------------------------------------------------------------------

ENGINE SERIAL NUMBER

The number is stamped on the engine as
shown.

F.M.V.S.S./C.M.V.S.S.
CERTIFICATION LABEL

The Federal/Canadian Motor Vehicle Safety
Standard (F.M.V.S.S./C.M.V.S.S.) certifica-
tion label is affixed as shown. This label con-
tains valuable vehicle information, such as:
(GVWR), (GAWR), month and year of manu-
facture, (VIN), etc. Review it carefully.

EMISSION CONTROL
INFORMATION LABEL

The emission control information label is at-
tached to the underside of the hood as
shown.

LTI2328

WTI0172

WTI0188

Technical and consumer information

10-11

CarManuals2.com

-------------------------------------------------------------------------------------------------------------------------------------------------------------

TIRE AND LOADING
INFORMATION LABEL

The cold tire pressure is shown on the Tire
and Loading Information label. The label is
located as shown.

AIR CONDITIONER
SPECIFICATION LABEL

The air conditioner specification label is af-
fixed to the underside of the hood as shown.

LTI0197

LTI2357

10-12

Technical and consumer information

CarManuals2.com

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Symbol Name

Reference

Graphic

Caution

ISO 7000 0434

Air Conditioning System
(MAC)

ISO 2575 D01

MAC System Lubricant Type
(PAG–POE)

Requires Registered Technician to
Service MAC System

Flammable Refrigerant

Air Conditioner Specification Label Symbols

1. Find the centerline of the vehicle and

measure down 1.06 in (27 mm). Mark the
location on the fascia.

LTI2665

INSTALLING FRONT LICENSE PLATE

Technical and consumer information

10-13

CarManuals2.com

-------------------------------------------------------------------------------------------------------------------------------------------------------------

2. Cross-car alignment can be done using

centerline in bracket and centerline in fas-
cia

O

A

.

3. Hold the license plate bracket to the fas-

cia and mark two locations

O

B

.

4. Remove the license plate bracket and drill

two 0.39 in (10 mm) holes in the locations
marked in the previous step.

5. Hold the license plate bracket to the fas-

cia and mark two locations

O

C

.

6. Remove the license plate bracket and drill

two 0.79in (20 mm) holes in the locations
marked in the previous step.

7. Insert two screw grommets

O

D

into the

fascia.

8. Install the license plate bracket to the fas-

cia with two screws

O

E

.

LTI2666

LTI2667

LTI2668

10-14

Technical and consumer information

CarManuals2.com

-------------------------------------------------------------------------------------------------------------------------------------------------------------

WARNING

It is extremely dangerous to ride in
a cargo area inside a vehicle. In a
collision, people riding in these ar-
eas are more likely to be seriously
injured or killed.

Do not allow people to ride in any
area of your vehicle that is not
equipped with seats and seat belts.

Be sure everyone in your vehicle is
in a seat and using a seat belt
properly.

TERMS

It is important to familiarize yourself
with the following terms before load-
ing your vehicle:
• Curb Weight (actual weight of your

vehicle) - vehicle weight including:
standard and optional equipment,
fluids, emergency tools, and spare
tire assembly. This weight

does not

include passengers and cargo.

• GVW (Gross Vehicle Weight) - curb

weight plus the combined weight of
passengers and cargo.

• GVWR (Gross Vehicle Weight Rat-

ing) - maximum total combined
weight of the unloaded vehicle, pas-
sengers, cargo, hitch, trailer tongue
load and any other optional equip-
ment. This information is located on
the F.M.V.S.S./C.M.V.S.S. certifica-
tion label.

• GAWR (Gross Axle Weight Rating) -

maximum weight (load) limit speci-
fied for the front or rear axle. This
information

is

located

on

the

F.M.V.S.S./C.M.V.S.S. certification
label.

• GCWR (Gross Combined Weight

Rating) - The maximum total weight
rating of the vehicle, passengers,
cargo, and trailer.

• Vehicle Capacity Weight, Load limit,

Total load capacity - maximum total
weight limit specified of the load
(passengers and cargo) for the ve-
hicle. This is the maximum combined
weight of occupants and cargo that
can be loaded into the vehicle. If the
vehicle is used to tow a trailer, the
trailer tongue weight must be in-
cluded as part of the cargo load. This
information is located on the Tire
and Loading Information label.

• Cargo capacity - permissible weight

of cargo, the subtracted weight of
occupants from the load limit.

VEHICLE LOADING INFORMATION

Technical and consumer information

10-15

CarManuals2.com

-------------------------------------------------------------------------------------------------------------------------------------------------------------

VEHICLE LOAD CAPACITY

Before driving a loaded vehicle, con-
firm that you do not exceed the Gross
Vehicle Weight Rating (GVWR) or the
Gross Axle Weight Rating (GAWR) for
your vehicle. Both the GVWR and
GAWR are located on the F.M.V.S.S./
C.M.V.S.S. certification label. For ad-
ditional information, see “Measure-
ment of weights” (P. 10-19).

Do not exceed the load limit of your
vehicle shown as “The combined
weight of occupants and cargo” on the
Tire and Loading Information label. Do
not exceed the number of occupants
shown as “Seating Capacity” on the
Tire and Loading Information label.

To get “the combined weight of occu-
pants and cargo”, add the weight of all
occupants, then add the total cargo
weight. Examples are shown in the
following illustration.

Steps For Determining Correct
Load Limit

LTI2335

Example

10-16

Technical and consumer information

CarManuals2.com

-------------------------------------------------------------------------------------------------------------------------------------------------------------

1. Locate the statement “The com-

bined weight of occupants and
cargo should never exceed XXX kg
or XXX lbs.” on your vehicle’s
placard.

2. Determine the combined weight of

the driver and passengers that will
be riding in your vehicle.

3. Subtract the combined weight of

the driver and passengers from
XXX kg or XXX lbs.

4. The resulting figure equals the

available amount of cargo and lug-
gage load capacity. For example, if
the “XXX” amount equals 1400 lbs.
and there will be five 150 lb. pas-
sengers in your vehicle, the amount
of available cargo and luggage
load capacity is 650 lbs. (1400-
750 (5 X 150) = 650 lbs.)

5. Determine the combined weight of

luggage and cargo being loaded on
the vehicle. That weight may not
safely exceed the available cargo
and luggage load capacity calcu-
lated in step 4.

6. If your vehicle will be towing a

trailer, load from your trailer will be
transferred to your vehicle. Consult
this manual to determine how this
reduces the available cargo and
luggage load capacity of your
vehicle.

Towing a trailer with a vehicle that is
not intended for towing may result in
an accident involving injury or death.

WARNING

Do not tow a trailer with your ve-
hicle. Towing a trailer may result in
an accident involving injury or death.

Before driving a loaded vehicle, con-
firm that you do not exceed the GVWR
or the GAWR for your vehicle. For ad-
ditional information, see “Measure-
ment of weights” (P. 10-19).

Also check tires for proper inflation
pressures. For additional information,
see “Tire and Loading Information la-
bel” (P. 8-29).

Technical and consumer information

10-17

CarManuals2.com

-------------------------------------------------------------------------------------------------------------------------------------------------------------

SECURING THE LOAD

There are luggage hooks located in the cargo
area as shown. The hooks can be used to
secure cargo with ropes or other types of
straps.

When securing items using luggage hooks
located on the side finisher do not apply a
load over more than 6.5 lbs. (29 N) to a single
hook.

The luggage hooks that are located on the
floor should have loads less than 110 lbs.
(490 N) to a single hook.

WARNING

Properly secure all cargo with ropes or
straps to help prevent it from sliding or
shifting. Do not place cargo higher than
the seatbacks. In a sudden stop or colli-
sion, unsecured cargo could cause per-
sonal injury.

The child restraint top tether strap may
be damaged by contact with items in the
cargo area. Secure any items in the cargo
area. Your child could be seriously injured
or killed in a collision if the top tether
strap is damaged.

Do not load your vehicle any heavier than
the GVWR or the maximum front and
rear GAWRs. If you do, parts of your ve-
hicle can break, tire damage could occur,
or it can change the way your vehicle
handles. This could result in loss of con-
trol and cause personal injury.

LOADING TIPS

• The GVW must not exceed GVWR

or GAWR as specified on the
F.M.V.S.S./C.M.V.S.S. certification
label.

• Do not load the front and rear axle

to the GAWR. Doing so will exceed
the GVWR.

WARNING

Properly secure all cargo with
ropes or straps to help prevent it
from sliding or shifting. Do not
place cargo higher than the seat-
backs. In a sudden stop or colli-
sion, unsecured cargo could cause
personal injury.

Do not load your vehicle any
heavier than the GVWR or the
maximum front and rear GAWRs.
If you do, parts of your vehicle can
break, tire damage could occur, or
it can change the way your vehicle
handles. This could result in loss of
control and cause personal injury.

LTI2556

Cargo area luggage hooks

10-18

Technical and consumer information

CarManuals2.com

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Overloading not only can shorten
the life of your vehicle and the tire,
but can also cause unsafe vehicle
handling and longer braking dis-
tances. This may cause a prema-
ture tire failure which could result
in a serious accident and personal
injury. Failures caused by over-
loading are not covered by the ve-
hicle’s warranty.

MEASUREMENT OF WEIGHTS

Secure loose items to prevent weight
shifts that could affect the balance of
your vehicle. When the vehicle is
loaded, drive to a scale and weigh the
front and the rear wheels separately
to determine axle loads. Individual axle
loads should not exceed either of the
Gross Axle Weight Ratings (GAWR).
The total of the axle loads should not
exceed the Gross Vehicle Weight Rat-
ing (GVWR). These ratings are given
on the vehicle certification label. If
weight ratings are exceeded, move or
remove items to bring all weights be-
low the ratings.

Do not tow a trailer with your vehicle.

TOWING A TRAILER

Technical and consumer information

10-19

CarManuals2.com

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Lifestyle Receiver (if so equipped)

WARNING

The Lifestyle Receiver cannot be used for
towing a trailer. Only use the Lifestyle Re-
ceiver for receiver mounted accessories
that meet the below requirements.

The maximum allowable load is 300 lbs.
(136 kg) including the weight of the in-
stalled accessory carrier.

Do not exceed allowable cargo weight
capacity of your vehicle.

Failure to use the Lifestyle Receiver as in-
tended can result in serious injury or death.

CAUTION

If your vehicle is equipped with the Life-
style Receiver to avoid damage to your ve-
hicle do not tow a trailer with your vehicle.

Do not tow a trailer with your vehicle with the
Lifestyle Receiver (if so equipped). The Life-
style Receiver should be used for receiver-
mounted accessories only. The Lifestyle Re-
ceiver is designed for carrying bikes, snow
boards/skis, camping gear and various other
bulky items.

FLAT TOWING FOR ALL–WHEEL
DRIVE VEHICLE

Towing your vehicle with all four wheels on
the ground is sometimes called flat towing.
This method is sometimes used when towing
a vehicle behind a recreational vehicle, such
as a motor home.

CAUTION

Failure to follow these guidelines can re-
sult in severe transmission damage.

Never flat tow your All-wheel drive
(AWD) vehicle.

DO NOT tow your All-wheel drive
(AWD) vehicle with any wheels on the
ground. Doing so may cause serious and
expensive damage to the powertrain.

For emergency towing procedures see
“Towing recommended by INFINITI”
(P. 6-8).

Continuously Variable Transmission

To tow a vehicle equipped with a continu-
ously variable transmission, an appropriate
vehicle dolly

MUST

be placed under the

towed vehicle's drive wheels.

Always

follow

the dolly manufacturer's recommendations
when using their product.

NOTE:

It the battery is completely drained the
transmission will not manually shift to other
positions.

LTI2338

10-20

Technical and consumer information

CarManuals2.com

-------------------------------------------------------------------------------------------------------------------------------------------------------------

DOT (Department of Transportation) Quality
Grades: All passenger car tires must conform
to federal safety requirements in addition to
these grades.

Quality grades can be found where appli-
cable on the tire sidewall between tread
shoulder and maximum section width. For
example:

Treadwear 200 Traction AA Temperature A

Treadwear

The treadwear grade is a comparative rating
based on the wear rate of the tire when
tested under controlled conditions on a
specified government test course. For ex-
ample, a tire graded 150 would wear one and
one-half (1 1/2) times as well on the govern-
ment course as a tire graded 100. The rela-
tive performance of tires depends upon the
actual conditions of their use, however, and
may depart significantly from the norm due
to variations in driving habits, service prac-
tices and differences in road characteristics
and climate.

Traction AA, A, B and C

The traction grades, from highest to lowest,
are AA, A, B, and C. Those grades represent
the tire's ability to stop on wet pavement as
measured under controlled conditions on

specified government test surfaces of as-
phalt and concrete. A tire marked C may have
poor traction performance.

WARNING

The traction grade assigned to this tire is
based on straight-ahead braking traction
tests, and does not include acceleration,
cornering, hydroplaning, or peak traction
characteristics.

Temperature A, B and C

The temperature grades are A (the highest),
B, and C, representing the tire’s resistance to
the generation of heat, and its ability to dis-
sipate heat when tested under controlled
conditions on a specified indoor laboratory
test wheel. Sustained high temperature can
cause the material of the tire to degenerate
and reduce tire life, and excessive tempera-
ture can lead to sudden tire failure. The grade
C corresponds to a level of performance
which all passenger car tires must meet under
the Federal Motor Safety Standard No. 109.
Grades B and A represent higher levels of
performance on the laboratory test wheel
than the minimum required by law.

WARNING

The temperature grade for this tire is es-
tablished for a tire that is properly inflated
and not overloaded. Excessive speed,
under-inflation, or excessive loading, ei-
ther separately or in combination, can
cause heat build-up and possible tire
failure.

UNIFORM TIRE QUALITY GRADING

Technical and consumer information

10-21

CarManuals2.com

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Your INFINITI is covered by the following
emission warranties:

For USA

1. Emission Defects Warranty

2. Emissions Performance Warranty

Details of these warranties may be found
with other vehicle warranties in your War-
ranty Information Booklet which comes with
your INFINITI. If you did not receive a War-
ranty Information Booklet, or it is lost, you
may obtain a replacement by writing to:

• INFINITI Division

Nissan North America, Inc.
Consumer Affairs Department
P.O. Box 685003
Franklin, TN 37068-5003

For Canada

Emission Control System Warranty

Details of these warranties may be found
with other vehicle warranties in your War-
ranty Information Booklet which comes with
your INFINITI. If you did not receive a War-
ranty Information Booklet, or it is lost, you
may obtain a replacement by writing to:

• Nissan Canada Inc.

5290 Orbitor Drive
Mississauga, Ontario, L4W 4Z5

For USA

If you believe that your vehicle has a de-
fect which could cause a crash or could
cause injury or death, you should immedi-
ately inform the National Highway Traffic
Safety Administration (NHTSA) in addi-
tion to notifying INFINITI.

If NHTSA receives similar complaints,
it may open an investigation, and if it
finds that a safety defect exists in a
group of vehicles, it may order a recall
and

remedy

campaign.

However,

NHTSA cannot become involved in in-
dividual problems between you, your
retailer, or INFINITI.

To contact NHTSA, you may call the
Vehicle Safety Hotline toll-free at
1-888-327-4236 (TTY: 1-800-424-
9153); go to http://www.safercar.gov;
or write to: Administrator, NHTSA,
400 Seventh Street, SW., Washington,
D.C. 20590. You can also obtain other
information about motor vehicle safety
from http://www.safercar.gov.

EMISSION CONTROL SYSTEM
WARRANTY

REPORTING SAFETY DEFECTS

10-22

Technical and consumer information

CarManuals2.com

-------------------------------------------------------------------------------------------------------------------------------------------------------------

You may notify INFINITI by contacting
our Consumer Affairs Department,
toll-free, at 1-800-662-6200.

For Canada

If you believe that your vehicle has a
defect which could cause a crash or
could cause injury or death, you should
immediately inform Transport Canada
in addition to notifying INFINITI.

If Transport Canada receives com-
plaints, it may open an investigation,
and if it finds that a safety defect ex-
ists in a group of vehicles, it may re-
quest that INFINITI conduct a recall
campaign.

However,

Transport

Canada cannot become involved in in-
dividual problems between you, your
retailer, or INFINITI.

You may contact Transport Canada's
Defect Investigations and Recalls Divi-
sion toll free at 1-800-333-0510. You
may also report safety defects online at:
http://www.tc.gc.ca/eng/
motorvehiclesafety/menu.htm (English
speakers) or http://www.tc.gc.ca/fra/
securiteautomobile/menu.htm (French
speakers)

Or contact Transport Canada by mail
at:
Transport

Canada

Motor

Vehicle

Safety Investigations Laboratory
80 Noel Street Gatineau, QC J8Z0A1

Additional

information

concerning

motor vehicle safety may be obtained
from Transport Canada's Road Safety
Information Centre at 1-800-333-
0371 or online at www.tc.gc.ca/
roadsafety

(English

speakers)

or

www.tc.gc.ca/securiteroutiere
(French speakers).

To notify INFINITI of any safety con-
cerns please contact our Consumer In-
formation

Centre

toll

free

at

1-800-361-4792.

Technical and consumer information

10-23

CarManuals2.com

-------------------------------------------------------------------------------------------------------------------------------------------------------------

WARNING

A vehicle equipped with All-Wheel Drive
(AWD) should never be tested using a two
wheel dynamometer (such as the dyna-
mometers used by some states for emis-
sions testing), or similar equipment. Make
sure you inform the test facility personnel
that your vehicle is equipped with AWD
before it is placed on a dynamometer. Us-
ing the wrong test equipment may result in
transmission damage or unexpected ve-
hicle movement which could result in seri-
ous vehicle damage or personal injury.

Due to legal requirements in some states and
Canadian Provinces, your vehicle may be re-
quired to be in what is called the “ready con-
dition” for an Inspection/Maintenance (I/M)
test of the emission control system.

The vehicle is set to the “ready condition”
when it is driven through certain driving pat-
terns. Usually, the ready condition can be
obtained by ordinary usage of the vehicle.

If a powertrain system component is repaired
or the battery is disconnected, the vehicle
may be reset to a “not ready” condition. Be-
fore taking the I/M test, check the vehicle's
inspection/maintenance test readiness con-
dition. Place the ignition switch in the ON
position without starting the engine. If the
Malfunction Indicator Light (MIL) comes on
steady for 20 seconds and then blinks for 10
seconds , the I/M test condition is “not
ready”. If the MIL does not blink after 20
seconds, the I/M test condition is “ready”. It is
recommended that you visit an INFINITI re-
tailer to set the “ready condition” or to pre-
pare the vehicle for testing.

This vehicle is equipped with an Event Data
Recorder (EDR). The main purpose of an EDR
is to record, in certain crash or near crash-like
situations, such as an air bag deployment or
hitting a road obstacle, data that will assist in
understanding how a vehicle's systems per-
formed. The EDR is designed to record data
related to vehicle dynamics and safety sys-
tems for a short period of time, typically 30
seconds or less. The EDR in this vehicle is
designed to record such data as:
• How various systems in your vehicle were

operating;

• Whether or not the driver and passenger

safety belts were buckled/fastened;

• How far (if at all) the driver was depressing

the accelerator and/or brake pedal; and,

• How fast the vehicle was traveling.
• Sounds are not recorded.

READINESS FOR INSPECTION/
MAINTENANCE (I/M) TEST

EVENT DATA RECORDERS (EDR)

10-24

Technical and consumer information

CarManuals2.com

-------------------------------------------------------------------------------------------------------------------------------------------------------------

These data can help provide a better under-
standing of the circumstances in which
crashes and injuries occur. NOTE: EDR data
are recorded by your vehicle only if a non-
trivial crash situation occurs; no data are re-
corded by the EDR under normal driving con-
ditions and no personal data (e.g., name,
gender, age, and crash location) are recorded.
However, other parties, such as law enforce-
ment, could combine the EDR data with the
type of personally identifying data routinely
acquired during a crash investigation.

To read data recorded by an EDR, special
equipment is required, and access to the ve-
hicle or the EDR is needed. In addition to the
vehicle manufacturer and INFINITI retailer,
other parties, such as law enforcement, that
have the special equipment, can read the in-
formation if they have access to the vehicle or
the EDR.

EDR data will only be accessed with the con-
sent of the vehicle owner or lessee or as
otherwise required or permitted by law.

ADDITIONAL DATA RECORDING
(on vehicles equipped with optional
ProPILOT Assist)

If your vehicle is equipped with the optional
ProPILOT Assist, it will also be equipped with
a

supplemental

vehicle

data

recording

function.

The data recording function is designed to
record such data as:
• Driver operational status of accelerator,

brakes, steering, etc.

• Detection status of a vehicle ahead and

lane markers

• Vehicle information including distance to

vehicle ahead and lateral position

• Information on the operation of the ProPI-

LOT Assist and other crash avoidance
features

• ProPILOT Assist malfunction diagnosis

information

• External images from multi-sensing front

camera (Available only when SRS air bag or
FEB with Pedestrian Detection system is
activated)

ProPILOT Assist does not record conversa-
tions, sounds or images of the inside of the
vehicle.

To read this vehicle data, special equipment is
required and access to the vehicle or the re-
cording unit is needed. This vehicle data will
only be accessed with the consent of the
vehicle owner or lessee or as otherwise re-
quired or permitted by law.

If downloaded, NISSAN may use the data
recorded for the purpose of improving
NISSAN's vehicle safety performance.

NISSAN will not disclose/provide the re-
corded data to a third party except:
• With the consent of the vehicle owner or

with the consent of the lessee

• In response to an official request from law

enforcement, a court order, governmental
agency,

or

other

legally

enforceable

requests

• For use as part of NISSAN's defense of

litigation

• For research purposes after the data is

modified such that it is no longer tied to a
specific vehicle or vehicle owner

If you have any questions regarding the data
NISSAN may collect about you, please visit our
Privacy Policy: https://www.infinitiusa.com.

Technical and consumer information

10-25

CarManuals2.com

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Genuine INFINITI Service Manuals for this
model year and prior can be purchased. A
Genuine INFINITI Service Manual is the best
source of service and repair information for
your vehicle. This manual is the same one
used by the factory-trained technicians
working

at

INFINITI

retailers.

Genuine

INFINITI Owner’s Manuals can also be
purchased.

For USA

For current pricing and availability of Genuine

INFINITI Service Manuals

, contact:

www.infiniti-techinfo.com

For current pricing and availability of Genuine

INFINITI Owner's Manuals

, contact:

1-800-247-5321

For Canada

To purchase a copy of a Genuine INFINITI
Service Manual or Owner’s Manual, for this
model year and prior, please contact your
nearest INFINITI retailer. For the phone num-
ber and location of an INFINITI retailer in
your area call the INFINITI Satisfaction Cen-
ter at 1-800-361-4792 and a bilingual
INFINITI representative will assist you.

OWNER'S MANUAL/SERVICE
MANUAL ORDER INFORMATION

10-26

Technical and consumer information

CarManuals2.com

-------------------------------------------------------------------------------------------------------------------------------------------------------------

 

 

 

 

 

 

 

Content      ..     14      15      16