2017 Infiniti QX60/JX (2017 year). Instruction

Some day-to-day and regular maintenance is es-
sential to maintain your vehicle good mechanical
condition, as well as its emissions and engine
performance.

It is the owner’s responsibility to make sure that
the scheduled maintenance, as well as general
maintenance, is performed.

As the vehicle owner, you are the only one who
can ensure that your vehicle receives proper
maintenance. You are a vital link in the mainte-
nance chain.

GENERAL MAINTENANCE

General maintenance includes those items which
should be checked during normal day-to-day op-
eration. They are essential for proper vehicle op-
eration. It is your responsibility to perform these
procedures regularly as prescribed.

Performing general maintenance checks requires
minimal mechanical skill and only a few general
automotive tools.

These checks or inspections can be done by
yourself, a qualified technician or, if you prefer, an
INFINITI retailer.

SCHEDULED MAINTENANCE

The maintenance items listed in this section are
required to be serviced at regular intervals. How-
ever under severe driving conditions, additional
or more frequent maintenance will be required.

WHERE TO GO FOR SERVICE

If maintenance service is required or your vehicle
appears to malfunction, have the systems
checked and serviced. It is recommended that
you visit an INFINITI retailer for this service.

INFINITI technicians are well-trained specialists
and are kept up-to-date with the latest service
information through technical bulletins, service
tips and training programs. They are completely
qualified to work on INFINITI vehicles before
work begins.

You can be confident that an INFINITI retailer’s
service department can perform the service
needed to meet the maintenance requirements
on your vehicle.

During the normal day-to-day operation of the
vehicle, general maintenance should be per-
formed regularly as prescribed in this section. If
you detect any unusual sounds, vibrations or
smells, be sure to check for the cause or have an
INFINITI retailer do it promptly. In addition, it is
recommended that you visit an INFINITI retailer if
you think that repairs are required.

When performing any checks or maintenance
work, closely observe the “Maintenance precau-
tions” in the “Do-it-yourself” section of this
instruction.

EXPLANATION OF GENERAL
MAINTENANCE ITEMS

Additional information on the following
items with “ * ” is found in the “Do-it-
yourself” section of this instruction.

Outside the vehicle

The maintenance items listed here should be
performed from time to time, unless otherwise
specified.

Doors and engine hood: Check that the doors
and engine hood operate properly. Also ensure
that all latches lock securely. Lubricate hinges,
latches, latch pins, rollers and links if necessary.

MAINTENANCE REQUIREMENTS

GENERAL MAINTENANCE

9-2

Maintenance and schedules

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Make sure that the secondary latch keeps the
hood from opening when the primary latch is
released.

When driving in areas using road salt or other
corrosive materials, check lubrication frequently.

Lights*: Clean the headlights on a regular basis.
Make sure that the headlights, stop lights, tail
lights, turn signal lights, and other lights are all
operating properly and installed securely. Also
check headlight aim.

Road wheel nuts (lug nuts)*: When checking
the tires, make sure no wheel nuts are missing,
and check for any loose wheel nuts. Tighten if
necessary.

Tire rotation*: Tires should be rotated every
5,000 miles (8,000 km).

Tires*: Check the pressure with a gauge often
and always prior to long distance trips. If neces-
sary, adjust the pressure in all tires, including the
spare, to the pressure specified. Check carefully
for damage, cuts or excessive wear.

Tire Pressure Monitoring System (TPMS)
transmitter components: Replace the TPMS
transmitter grommet seal, valve core and cap
when the tires are replaced due to wear or age.

Tire, wheel alignment and balance: If the
vehicle should pull to either side while driving on
a straight and level road, or if you detect uneven
or abnormal tire wear, there may be a need for
wheel alignment. If the steering wheel or seat
vibrates at normal highway speeds, wheel bal-
ancing may be needed.

For additional information regarding tires, refer to
“Important Tire Safety Information” (US) or “Tire
Safety Information” (Canada) in the INFINITI
Warranty Information Booklet.

Windshield: Clean the windshield on a regular
basis. Check the windshield at least every six
months for cracks or other damage. Have a dam-
aged windshield repaired by a qualified repair
facility.

Windshield wiper blades*: Check for cracks
or wear if they do not wipe properly.

Inside the vehicle

The maintenance items listed here should be
checked on a regular basis, such as when per-
forming scheduled maintenance, cleaning the ve-
hicle, etc.

Accelerator pedal: Check the pedal for smooth
operation and make sure the pedal does not
catch or require uneven effort. Keep the floor mat
away from the pedal.

Brake pedal: Check the pedal for smooth op-
eration. If the brake pedal suddenly goes down
further than normal, the pedal feels spongy or the
vehicle seems to take longer to stop, have your
vehicle checked immediately. It is recommended
that you visit an INFINITI retailer for this service.
Keep the floor mat away from the pedal.

Brakes: Check that the brakes do not pull the
vehicle to one side when applied.

Continuously Variable Transmission (CVT)
P (Park) position mechanism: On a fairly
steep hill check that the vehicle is held securely
with the shift lever in the P (Park) position without
applying any brakes.

Parking brake: Check the parking brake opera-
tion regularly. The vehicle should be securely held
on a fairly steep hill with only the parking brake
applied. If the parking brake needs adjustment, it
is recommended that you visit an INFINITI retailer
for this service.

Seat belts: Check that all parts of the seat belt
system (for example, buckles, anchors, adjusters
and retractors) operate properly and smoothly,
and are installed securely. Check the belt web-
bing for cuts, fraying, wear or damage.

Seats: Check seat position controls such as
seat adjusters, seatback recliner, etc., to ensure
they operate smoothly and all latches lock se-

Maintenance and schedules

9-3

-------------------------------------------------------------------------------------------------------------------------------------------------------------

curely in every position. Check that the head
restraints/headrests

move

and

down

smoothly and the locks (if so equipped) hold
securely in all latched positions.

Steering wheel: Check for changes in the
steering system, such as excessive free play,
hard steering or strange noises.

Warning lights and chimes: Make sure all
warning lights and chimes are operating properly.

Windshield defroster: Check that the air
comes out of the defroster outlets properly and in
sufficient quantity when operating the heater or
air conditioner.

Windshield wiper and washer*: Check that
the wipers and washer operate properly and that
the wipers do not streak.

Under the hood and vehicle

The maintenance items listed here should be
checked periodically (for example, each time you
check the engine oil or refuel).

Battery*: Check the fluid level in each cell. The
fluid should be at the bottom of the filler opening.
Vehicles operated in high temperatures or under
severe conditions require frequent checks of the
battery fluid level.

NOTE:

Care should be taken to avoid situations
that can lead to potential battery discharge
and potential no-start conditions such as:

1. Installation or extended use of elec-

tronic accessories that consume bat-
tery power when the engine is not run-
ning

(Phone

chargers,

GPS,

DVD

players, etc.).

2. Vehicle is not driven regularly and/or

only driven short distances.

In these cases, the battery may need to be
charged to maintain battery health.

Brake fluid level*: Make sure that the brake
fluid level is between the MAX and MIN lines on
the reservoir.

Engine coolant level*: Check the coolant level
when the engine is cold.

Engine drive belts*: Make sure the drive belts
are not frayed, worn, cracked or oily.

Engine oil level*: Check the level after parking
the vehicle on a level spot and turning off the
engine. Wait more than 15 minutes for the oil to
drain back into the oil pan.

Exhaust system: Make sure there are no loose
supports, cracks or holes. If the sound of the
exhaust seems unusual or there is a smell of
exhaust fumes, immediately have the exhaust
system inspected. It is recommended that you
visit an INFINITI retailer for this service. For addi-
tional information, refer to “Exhaust gas (carbon
monoxide)” in the “Starting and driving” section of
this instruction.

Fluid leaks: Check under the vehicle for fuel, oil,
water or other fluid leaks after the vehicle has
been parked for a while. Water dripping from the
air conditioner after use is normal. If you should
notice any leaks or if fuel fumes are evident,
check for the cause and have it corrected imme-
diately.

Power steering fluid level* and lines: Check
the level when the fluid is cold, with the engine
off. Check the lines for proper attachment, leaks,
cracks, etc.

Radiator and hoses: Check the front of the
radiator and clean off any dirt, insects, leaves,
etc., that may have accumulated. Make sure the
hoses have no cracks, deformation, rot or loose
connections.

9-4

Maintenance and schedules

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Underbody: The underbody is frequently ex-
posed to corrosive substances such as those
used on icy roads or to control dust. It is very
important to remove these substances, other-
wise rust may form on the floor pan, frame, fuel
lines and around the exhaust system. At the end
of winter, the underbody should be thoroughly
flushed with plain water, being careful to clean
those areas where mud and dirt may accumulate.
For additional information, refer to the “Appear-
ance and care” section of this instruction.

Windshield-washer fluid*: Check that there is
adequate fluid in the reservoir.

The following descriptions are provided to give
you a better understanding of the scheduled
maintenance items that should be regularly
checked or replaced. The maintenance schedule
indicates at which mileage/time intervals each
item requires service.

In addition to scheduled maintenance, your ve-
hicle requires that some items be checked during
normal day-to-day operation. For additional infor-
mation, refer to “General maintenance” in this
section.

Items marked with “*” are recommended by
INFINITI for reliable vehicle operation. You are not
required to perform maintenance on these items
in order to maintain the warranties which come
with your INFINITI. Other maintenance items and
intervals are required.

When applicable, additional information can be
found in the “Do-it-yourself” section of this
instruction.

NOTE:

INFINITI does not advocate the use of non-
OEM approved aftermarket flushing sys-
tems and strongly advises against perform-
ing these services on an INFINITI product.
Many of the aftermarket flushing systems
use non-OEM approved chemicals or sol-
vents, the use of which has not been vali-
dated by INFINITI.

For recommended fuel, lubricants, fluids,
grease, and refrigerant, refer to “Recom-
mended fluids/lubricants and capacities”
in the “Technical and consumer informa-
tion” section of this instruction.

EMISSION CONTROL SYSTEM
MAINTENANCE:

Drive belts*:

Check engine drive belts for wear, fraying or
cracking and for proper tension. Replace any
damaged drive belts.

Engine air filter:

Replace at specified intervals. When driving for
prolonged

periods

dusty

conditions,

check/replace the filter more frequently.

EXPLANATION OF SCHEDULED
MAINTENANCE ITEMS

Maintenance and schedules

9-5

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Engine coolant*:

Replace coolant at the specified interval. When
adding or replacing coolant, be sure to use only
Genuine NISSAN Long Life Antifreeze/Coolant
(blue) or equivalent with the proper mixture. (For
additional information on the proper mixture for
your area, refer to “Engine cooling system” in the
“Do-it-yourself” section of this instruction.)

NOTE: Mixing any other type of coolant or
the use of non-distilled water may reduce
the recommended service interval of the
coolant.

Engine oil and oil filter:

Replace engine oil and oil filter at the specified
intervals. For recommended oil grade and viscos-
ity refer to “Recommended fluids/lubricants and
capacities” in the “Technical and consumer infor-
mation” section of this instruction.

Engine valve clearance*:

Inspect only if valve noise increase. Adjust valve
clearance if necessary.

Evaporative emissions control vapor lines*:

Check vapor lines for leaks or looseness. Tighten
connections or replace parts as necessary.

Fuel lines*:

Check the fuel hoses, piping and connections for
leaks, looseness, or deterioration. Tighten con-
nections or replace parts as necessary.

Spark plugs:

Replace at specified intervals. Install new plugs
of the same type as originally equipped.

CHASSIS AND BODY
MAINTENANCE:

Brake lines and cables:

Visually inspect for proper installation. Check for
chafing, cracks, deterioration, and signs of leak-
ing. Replace any deteriorated or damaged parts
immediately.

Brake pads and rotors:

Check for wear, deterioration and fluid leaks.
Replace any deteriorated or damaged parts im-
mediately.

Exhaust system:

Visually inspect the exhaust pipes, muffler and
hangers for leaks, cracks, deterioration, and dam-
age. Tighten connections or replace parts as
necessary.

In-cabin microfilter:

Replace at specified intervals. When driving for
prolonged periods in dusty conditions, replace
the filter more frequently.

Propeller shaft(s):

Check for damage, looseness, and grease leak-
age. (AWD)

Steering gear and linkage, axle and sus-
pension parts, drive shaft boots:

Check for damage, looseness, and leakage of oil
or grease. Under severe driving conditions, in-
spect more frequently.

Tire rotation:

Tires should be rotated every 5,000 miles
(8,000 km) according to the instructions under
“Explanation of general maintenance items” in
this section. When rotating tires, check for dam-
age and uneven wear. Replace if necessary.

Transmission fluid/oil, differential oil and
transfer case oil:

Visually inspect for signs of leakage at specified
intervals.

Replace at specified intervals.

9-6

Maintenance and schedules

-------------------------------------------------------------------------------------------------------------------------------------------------------------

To help ensure smooth, safe and economical
driving, INFINITI provides two maintenance
schedules that may be used, depending upon the
conditions in which you usually drive. These
schedules contain both distance and time inter-
vals,

120,000

miles

(192,000 km)/144 months. For most people, the
odometer reading will indicate when service is
needed. However, if you drive very little, your
vehicle should be serviced at the regular time
intervals shown in the schedule.

After

120,000

miles

(192,000 km)/144 months, continue main-
tenance at the same mileage/time inter-
vals.

ADDITIONAL MAINTENANCE ITEMS
FOR SEVERE OPERATING
CONDITIONS

Additional maintenance items for severe
operating conditions should be performed on
vehicles that are driven under especially de-
manding conditions. Additional maintenance
items should be performed if you primarily oper-
ate your vehicle under the following conditions:

● Repeated short trips of less than 5 miles

(8 km).

● Repeated short trips of less than 10 miles

(16 km) with outside temperatures remain-
ing below freezing.

● Operating in hot weather in stop-an-go

“rush hour” traffic.

● Extensive idling and/or low speed driving for

long distances, such as police, taxi or door-
to-door delivery use.

● Driving in dusty conditions.
● Driving on rough, muddy or salt spread

roads.

● Towing a trailer, using a camper or a car-top

carrier.

NOTE:

For vehicles operated in Canada, both
standard and severe maintenance items
should be performed at every interval.

The following tables show the standard mainte-
nance schedule. Depending upon weather and
atmospheric conditions, varying road surfaces,
individual driving habits and vehicle usage, addi-
tional or more frequent maintenance may be re-
quired.

After

120,000

miles

(192,000 km)/144 months, continue main-
tenance at the same mileage/time interval.

MAINTENANCE SCHEDULES

STANDARD MAINTENANCE

Maintenance and schedules

9-7

-------------------------------------------------------------------------------------------------------------------------------------------------------------

EMISSION CONTROL SYSTEM MAINTENANCE

Abbreviations: I = Inspect and correct or replace as necessary, R = Replace, D = Drain water

MAINTENANCE OPERATION

Perform at number of miles, kilometers or months,

whichever comes first.

miles x 1,000

(km x 1,000)

Months

MAINTENANCE INTERVAL

(8)

(16)

(24)

(32)

(40)

(48)

(56)

(64)

(72)

(80)

(88)

(96)

Drive belts

See NOTE (1)

Air cleaner filter

See NOTE (2)

EVAP vapor lines

Fuel lines

Fuel filter

See NOTE (3)

Engine coolant*

See NOTE (4)(5)

Engine oil

Engine oil filter

Spark plugs

See NOTE (6)

Replace every 105,000 miles (168,000 km)

Intake and exhaust valve clearances*

See NOTE (7)

9-8

Maintenance and schedules

-------------------------------------------------------------------------------------------------------------------------------------------------------------

MAINTENANCE OPERATION

Perform at number of miles, kilometers or months,

whichever comes first.

miles x 1,000

(km x 1,000)

Months

MAINTENANCE INTERVAL

(104)

(112)

(120)

(128)

(136)

102

(144)

108

(152)

114

100

(160)

120

105

(168)

126

110

(176)

132

115

(184)

138

120

(192)

144

Drive belts

See NOTE (1)

Air cleaner filter

See NOTE (2)

EVAP vapor lines

Fuel lines

Fuel filter

See NOTE (3)

Engine coolant*

See NOTE (4)(5)

Engine oil

Engine oil filter

Spark plugs

See NOTE (6)

Replace every 105,000 miles (168,000 km)

Intake and exhaust valve clearances*

See NOTE (7)

NOTE:

(1) After 40,000 miles (64,000 km) or 48 months, inspect every 10,000 miles (16,000 km) or 12 months. Replace the drive belts if found
damaged.
(2) If operating mainly in dusty conditions, more frequent maintenance may be required.
(3) Periodic maintenance is not required.
(4) First replacement interval is 105,000 miles (168,000 km) or 84 months. After first replacement, replace every 75,000 miles (120,000 km)
or 60 months.
(5) Use only Genuine NISSAN Long Life Antifreeze/Coolant (blue) or equivalent with proper mixture ration of 50% antifreeze and 50%
demineralized or distilled water. Mixing any other type of coolant or the use of non-distilled water may reduce the life expectancy of the
factory fill coolant.
(6) Replace spark plug when the plug gap exceeds 0.055 in (1.4 mm) even if within specified periodic replacement mileage.
(7) Periodic maintenance is not required. However, if valve noise increased, inspect valve clearance.

* Maintenance items and intervals with “*” are recommended by INFINITI for reliable vehicle operation. The owner need not perform such
maintenance in order to maintain the emission warranty or manufacturer recall liability. Other maintenance items and intervals are
required.

Maintenance and schedules

9-9

-------------------------------------------------------------------------------------------------------------------------------------------------------------

CHASSIS & BODY MAINTENANCE

Abbreviations: I = Inspect and correct or replace as necessary, R = Replace,

MAINTENANCE OPERATION

Perform at number of miles, kilometers or months, whichever

comes first.

miles x 1,000

(km x 1,000)

Months

MAINTENANCE INTERVAL

(8)

(16)

(24)

(32)

(40)

(48)

(56)

(64)

(72)

(80)

(88)

(96)

Brake lines & cables

Brake pads & rotors

夝

Brake fluid

夝

CVT fluid

See NOTE (1)

Transfer fluid & differential gear oil

See NOTE (2)

Steering gear and linkage, axle and suspension parts

夝

Tire rotation

See NOTE (3)

Propeller shaft (AWD models) & drive shaft boots

夝

Exhaust system

夝

In-cabin microfilter

Intelligent Key battery

9-10

Maintenance and schedules

-------------------------------------------------------------------------------------------------------------------------------------------------------------

MAINTENANCE OPERATION

Perform at number of miles, kilometers or months,

whichever comes first.

miles x 1,000

(km x 1,000)

Months

MAINTENANCE INTERVAL

(104)

(112)

(120)

(128)

(136)

102

(144)

108

(152)

114

100

(160)

120

105

(168)

126

110

(176)

132

115

(184)

138

120

(192)

144

Brake lines and cables

Brake pads and rotors

夝

Brake fluid

夝

CVT fluid

See NOTE (1)

Transfer fluid & differential gear oil

See NOTE (2)

Steering gear and linkage, axle and suspension parts

夝

Tire rotation

See NOTE (3)

Propeller shaft (AWD models) & drive shaft boots

夝

Exhaust system

夝

In-cabin microfilter

Intelligent Key battery

NOTE:

Maintenance items with “

夝” should be performed more frequently according to “Maintenance under severe driving conditions”.

(1) If towing a trailer, using a camper or a car-top carrier or driving on rough or muddy roads, inspect CVT fluid deterioration at an INFINITI
retailer every 60,000 miles (96,000 km), then change CVT fluid if necessary. And if the inspection is not performed, change (not just inspect)
CVT fluid every 60,000 miles (96,000 km).
(2) If towing a trailer, using a camper or a car-top, or driving on rough or muddy roads, change (not just inspect) oil at every 20,000 miles
(32,000 km) or 24 months.
(3) For additional information on tire rotation, refer to “General maintenance” in this section.

Maintenance and schedules

9-11

-------------------------------------------------------------------------------------------------------------------------------------------------------------

The maintenance intervals shown on the preceding pages are for normal operating conditions. If the vehicle is mainly operated under severe driving
conditions as shown below, more frequent maintenance must be performed on the following items as shown in the table.

SEVERE DRIVING CONDITIONS

● Repeated short trips of less than 5 miles

(8 km).

● Repeated short trips of less than 10 miles

(16 km) with outside temperatures remain-
ing below freezing.

● Operating in hot weather in stop-and-go

“rush hour” traffic.

● Extensive idling and/or low speed driving for

long distance, such as police, taxi or door-
to-door delivery use.

● Driving in dusty conditions.
● Driving on rough, muddy or salt spread

roads.

● Towing a trailer, using a camper or a car-top

carrier.

Maintenance operation: Inspect = Inspect and correct or replace as necessary.

Maintenance item

Maintenance operation

Maintenance interval

Brake fluid

Replace

Every 10,000 miles (16,000 km) or 12 months

Brake pads & rotors

Inspect

Every 5,000 miles (8,000 km) or 6 months

Steering gear & linkage, axle & suspension parts

Inspect

Every 5,000 miles (8,000 km) or 6 months

Propeller shaft (AWD models) & drive shaft boots

Inspect

Every 5,000 miles (8,000 km) or 6 months

Exhaust system

Inspect

Every 5,000 miles (8,000 km) or 6 months

MAINTENANCE UNDER SEVERE
OPERATING CONDITIONS

9-12

Maintenance and schedules

-------------------------------------------------------------------------------------------------------------------------------------------------------------

The following are approximate capacities. The actual refill capacities may be slightly different. When refilling, follow the procedure
described in the “Do-it-yourself” section to determine the proper refill capacity.

Fluid type

Capacity (Approximate)

Recommended Fluids/Lubricants

Metric

Measure

US Measure

Imperial Measure

Fuel

74 L

19-1/2 gal

16-1/4 gal

• For additional information, refer to “Fuel recom-
mendation” in this section.

Engine oil*1
Drain and refill
*1 For additional information, refer
to “Engine oil” in the “Do-it-
yourself” section of this manual.

With oil filter

change

4.8 L

5-1/8 qt

4-1/4 qt

• Genuine “Nissan Motor Oil 0W-20 SN” is
recommended.
• If the above motor oil is not available, use an
equivalent motor oil that matches the above
grade and viscosity. For additional information,
refer to “Engine oil and oil filter recommenda-
tions” in this section.

Without oil filter

change

4.5 L

4-3/4 qt

4 qt

Engine coolant
(with reservoir)

9.6 L

2-1/2 gal

2-1/8 gal

• Pre-diluted Genuine NISSAN Long Life
Antifreeze/Coolant (blue) or equivalent

Continuously Variable Transmission (CVT) fluid

—

• Genuine NISSAN CVT Fluid NS-3
• INFINITI recommends using Genuine NISSAN
CVT Fluid NS-3 (or equivalent) ONLY in INFINITI
CVTs. Do not mix with other fluids. Using fluids
that are not equivalent to Genuine NISSAN CVT
Fluid NS-3 may damage the CVT. Damage
caused by the use of fluids other than as recom-
mended is not covered under the INFINITI’s New
Vehicle Limited Warranty.

Power steering fluid (PSF)

—

• Genuine NISSAN E-PSF or equivalent.
• Use of a power steering fluid other than Genu-
ine NISSAN E-PSF may prevent the power
steering system from operating properly.

RECOMMENDED FLUIDS/
LUBRICANTS AND CAPACITIES

10-2

Technical and consumer information

-------------------------------------------------------------------------------------------------------------------------------------------------------------

2017 Infiniti QX60/JX (2017 year). Instruction - part 36