|
|
|
Restarting the entry/exit function If the battery cable is disconnected, or if the fuse 1. Drive the vehicle over 25 mph (40 km/h). OR 2. Open and close the driver’s door more than two times with the ignition switch in the OFF The entry/exit function should now work properly. SETTING MEMORY FUNCTION The position of the following settings can be ● Climate control system To use the memory function, set the climate, To engage the memorized settings, perform the 1. Carry the Intelligent Key that is linked to the memorized settings. 2. Unlock the doors by pushing the driver’s door handle request switch or the UNLOCK button on the Intelligent Key. 3. Place the ignition switch in the ON position. The settings linked to the Intelligent Key will For additional information on using the Climate For additional information on using the Naviga- For additional information on using the Audio SYSTEM OPERATION The automatic drive positioner system will not ● When the vehicle speed is above 0 mph (0 km/h) or 4 mph (7km/h) for some limited ● When any of the memory switches are pushed while the automatic drive positioner ● When the adjusting switch for the driver’s seat and steering column is turned on while ● When the seat has already been moved to the memorized position. ● When no seat position is stored in the memory switch. ● When the shift lever is moved from P (Park) to any other position. 3-38 Pre-driving checks and adjustments |