Content   ..  10  11  12  13   ..

Hyundai Tucson Fuel Cell (2016 year). Manual - part 12

IGNITION SWITCH

Turing off the Vehicle

POWER button

WARNING

1.Depress the brake pedal fully.

2.Place the gear shift lever in the P

To reduce the risk of SERIOUS

(Park).

INJURY or DEATH, take the fol-

lowing precautions:

3.Apply the parking brake firmly.

•

NEVER allow children or any

4.Press the power switch to turn the

person who is unfamiliar with

vehicle off.

the vehicle to touch the igni-

5.Make sure the "Powering down

tion switch or related parts.

please wait" indicator lights on the

Unexpected and sudden vehi-

instrument cluster are turned off.

cle movement can occur.

•

NEVER reach through the

CAUTION

OLMFC054005

steering wheel for the ignition

switch, or any other control,

5

Whenever the front door is opened,

If the "Powering down please

while the vehicle is in motion.

the POWER button will illuminate

wait" indicator light on the

The presence of your hand or

and will go off 30 seconds after the

instrument cluster is still on, be

arm in this area may cause a

door is closed.

careful that the vehicle is not

loss of vehicle control result-

turned off and can move when

ing in an accident.

you place the gear shift lever in

any position except P (Park).

5-5

POWER button positions

Button Position

Action

Notes

OFF

To turn off the power cell module, press the

POWER button with shift lever in P (Park).

When you press the POWER button without

the shift lever in P (Park), the POWER button

does not turn to the OFF position, but turns

to the ACC position.

5

ACC

Press the POWER button when the button is

If you leave the POWER button in the ACC

in the OFF position without depressing the

position for more than one hour, the battery

brake pedal.

power will turn off automatically to prevent the

battery from discharging.

Electrical accessories are usable.

5-7

Driving your vehicle

Button Position

Action

Notes

ON

Press the POWER button while it is in the

If you leave the POWER button in the ON posi-

ACC position without depressing the brake

tion for more than one hour, the battery power

pedal.

will turn off automatically to prevent the battery

from discharging.

The warning lights can be checked before

the power cell module is started.

START

To start the power cell module, depress the

If you press the POWER button without

brake pedal and press the POWER button

depressing the brake pedal, the power cell

with the shift lever in the P (Park) or in the N

module does not start and the POWER button

(Neutral) position.

changes as follows:

For your safety, start the power cell module

OFF → ACC → ON → OFF

with the shift lever in the P (Park) position.

5-8

Starting the power cell module

✽ NOTICE

1.Always carry the smart key with

you.

•

The power cell module will start

WARNING

by pressing the POWER button,

2.Make sure the parking brake is

only when the smart key is in the

applied.

Always wear appropriate shoes

vehicle.

3.Make sure the shift lever is in P

when operating your vehicle.

•

Even if the smart key is in the

(Park).

Unsuitable shoes, such as high

vehicle, if it is far away from the

4.Depress the brake pedal.

heels, ski boots, sandals, flip-

driver, the power cell module may

5.Press the POWER button.

flops, etc., may interfere with

not start.

your ability to use the brake,

•

When the POWER button is in the

accelerator and clutch pedals..

ACC or ON position, if any door is

open, the system checks for the

smart key. If the smart key is not

in the vehicle, the "

" indica-

5

tor and the “KEY OUT” indicator

will blink, and if all doors are

closed, the chime will also sound

for about 5 seconds. The indicator

will turn off while the vehicle is

moving. Keep the smart key in the

vehicle when using the ACC posi-

tion or if the vehicle power cell

module is ON.

5-9

Driving your vehicle

CAUTION

To prevent damage to the vehi-

cle:

Do not press the POWER button

for more than

10 seconds

except when the stop lamp fuse

is blown.

When the stop lamp fuse is

blown, you can't start the power

cell module normally. Replace

OLMFC054006

the fuse with a new one. If you

✽ NOTICE

are not able to replace the fuse,

you can start the power cell

If the smart key battery is weak or

module by pressing and hold-

the smart key does not work cor-

ing the POWER button for 10

rectly, you can start the power cell

seconds with the POWER but-

module by inserting the smart key in

ton in the ACC position.

the smart key holder. When you pull

out the smart key from the smart

For your safety always depress

key holder, press the smart key and

the brake pedal before starting

pull it out.

the power cell module.

5-10

GEAR SHIFT LEVER

WARNING

To reduce the risk of serious

injury or death:

• ALWAYS check the surround-

ing areas near your vehicle for

people, especially children,

before shifting a vehicle into

D (Drive) or R (Reverse).

• Before leaving the driver’s

seat, always make sure the

shift lever is in the P (Park)

position, then set the parking

brake, and place the POWER

5

button in the LOCK/OFF posi-

tion. Unexpected and sudden

vehicle movement can occur

if these precautions are not

followed.

Depress the brake pedal, then move shift lever.

Move shift lever.

OLMFC054010

5-11

Driving your vehicle

The indicator in the instrument clus-

R (Reverse)

WARNING

ter displays the shift lever position

Use this position to drive the vehicle

when the POWER button is in the

backward.

•

Shifting into P (Park) while the

ON position.

vehicle is in motion may

cause you to lose control of

CAUTION

P (Park)

the vehicle.

Always come to a complete

Always come to a complete stop

•

After the vehicle has stopped,

stop before shifting into or out

before shifting into P (Park).

always make sure the shift

of R (Reverse); you may dam-

To shift from P

(Park), you must

lever is in P (Park), apply the

age the gear shift lever if you

depress firmly on the brake pedal

parking brake, and turn the

shift into R (Reverse) while the

and make sure your foot is off the

power cell module off.

vehicle is in motion.

accelerator pedal.

•

Do not use the P (Park) posi-

If you have done all of the above and

tion in place of the parking

still cannot shift the lever out of P

brake.

(Park), see “Shift-Lock Release” on

page 5-15.

The shift lever must be in P (Park)

before turning the power cell module

off.

5-12

N (Neutral)

D (Drive)

E (Economic)

The wheels and gear shift lever are

This is the normal driving position.

Use this mode to drive the vehicle on

not engaged.

The gear shift lever will convert the

high fuel efficiency mode.

traction motor rotational speed to

Use N (Neutral) to disconnect the

drive wheels from the traction motor.

provide optimal torque output to the

✽ NOTICE

drive wheels.

Shift into P

(Park) if you need to

In the E (Econimic) mode, the vehi-

leave your vehicle for any reason.

cle power may be limited for reduc-

Always depress the brake pedal

ing the fuel consumption.

when you are shifting from N

(Neutral) to another gear.

L (Low)

With the gear shift lever in L (Low),

WARNING

the maximum amount of regenera-

tive braking is applied. Use this

5

Do not shift into gear unless

mode when driving down a steep

your foot is firmly on the brake

grade, such as a mountain road. The

pedal.

regenerative braking that is applied

will have a similar effect as engine

braking in a conventional vehicle.

5-13

Driving your vehicle

Shift-lock system

Shift-lock release

5. Move the shift lever to N (Neutral)

while holding down the key

(or

For your safety, the gear shift lever

screwdriver).

has a shift-lock system which pre-

vents shifting the gear shift lever

6. Remove the key (or screwdriver)

from P (Park) or N (Neutral) into R

from the shift-lock access hole

(Reverse) unless the brake pedal is

then install the cap.

depressed.

7. Depress the brake pedal, and then

To shift the gear shift lever from P

restart the engine.

(Park) or N

(Neutral) into R

If you need to use the shift-lock

(Reverse):

release, have your vehicle inspected

1.Depress and hold the brake pedal.

by an authorized HYUNDAI Tucson

Fuel Cell dealer immediately.

2.Start the power cell module or

place the POWER button in the ON

OLMFC054011N

position.

If the shift lever cannot be moved

3.Move the shift lever.

from the P (Park) or N (Neutral) posi-

tion into R

(Reverse) position with

the brake pedal depressed, continue

depressing the brake, and then do

the following:

1. Place the ignition switch in the

LOCK/OFF position.

2. Apply the parking brake.

3. Carefully remove the cap (1) cov-

ering the shift-lock access hole.

4. Insert a key (or screwdriver) into

the access hole and press down

on the key (or screwdriver).

5-14

BRAKING SYSTEM

Power brakes

WARNING

(Continued)

Your vehicle has power-assisted

•

Wet brakes may impair the

brakes that adjust automatically

Take the following precautions:

vehicle’s ability to safely slow

through normal usage.

•

Do not drive with your foot

down; the vehicle may also

If the power cell module is not run-

pull to one side when the

resting on the brake pedal.

ning or is turned off while driving, the

This will create abnormal high

brakes are applied. Applying

power assist for the brakes will not

the brakes lightly will indicate

brake temperatures, exces-

work. You can still stop your vehicle

sive brake lining and pad

whether they have been

by applying greater force to the brake

affected in this way. Always

wear, and increased stopping

pedal than typical. The stopping dis-

distances.

test your brakes in this fash-

tance, however, will be longer than

ion after driving through deep

•

When descending a long or

with power brakes.

water. To dry the brakes, light-

steep hill, use the regenera-

When the power cell module is not

ly tap the brake pedal to heat

tive braking mode by shifting

up the brakes while maintain-

running, the reserve brake power is

to L (Low) gear and avoid con-

5

partially depleted each time the

ing a safe forward speed until

tinuous application of the

brake performance returns to

brake pedal is applied. Do not pump

brakes. Applying the brakes

the brake pedal when the power

normal. Avoid driving at high

continuously will cause the

speeds until the brakes func-

assist has been interrupted.

brakes to overheat and could

tion correctly.

Pump the brake pedal only when

result in a temporary loss of

necessary to maintain steering con-

braking performance.

trol on slippery surfaces.

(Continued)

5-17

Driving your vehicle

Disc brakes wear indicator

Parking brake

WARNING

When your brake pads are worn and

new pads are required, you will hear

To reduce the risk of SERIOUS

a high pitched warning sound from

INJURY or DEATH, do not oper-

your front or rear brakes. You may

ate the parking brake while the

hear this sound come and go or it

vehicle is moving except in an

may occur whenever you depress

emergency situation. It could

the brake pedal.

damage the brake system and

Please remember some driving con-

lead to an accident.

ditions or climates may cause a

brake squeal when you first apply (or

lightly apply) the brakes. This is nor-

mal and does not indicate a problem

OLMB053021

with your brakes.

Always set the parking brake before

leaving the vehicle, to apply:

CAUTION

■ Foot type

Firmly depress the brake pedal.

To avoid costly brake repairs,

do not continue to drive with

Depress the parking brake pedal

worn brake pads.

down as far as possible.

✽ NOTICE

Always replace brake pads as com-

plete front or rear axle sets.

5-18

WARNING

(Continued)

•

Only release the parking

•

Whenever leaving the vehicle

brake when you are seated

or parking, always come to a

inside the vehicle with your

complete stop and continue

foot firmly on the brake pedal.

to depress the brake pedal.

Move the shift lever into the P

(Park) position, then apply the

parking brake, and place the

POWER button in the

LOCK/OFF position.

OLMB053023

Vehicles with the parking

To release:

brake not fully engaged are at

■ Foot type

risk for moving inadvertently

5

Firmly depress the brake pedal.

and causing injury to yourself

or others.

Depress the parking brake pedal

down and it will release automatical-

•

NEVER allow anyone who is

ly.

unfamiliar with the vehicle to

touch the parking brake. If the

parking brake is released

unintentionally, serious injury

may occur.

(Continued)

5-19

Driving your vehicle

If the Parking Brake Warning Light

CAUTION

remains on after the parking brake is

released while power cell module is

•

Do not apply the accelerator

running, there may be a malfunction

pedal while the parking brake

in the brake system. Immediate

is engaged. If you depress the

attention is necessary.

accelerator pedal with the

If at all possible, cease driving the

parking brake engaged, warn-

vehicle immediately. If that is not pos-

ing will sound. Damage to the

sible, use extreme caution while

parking brake may occur.

operating the vehicle and only con-

•

Driving with the parking brake

tinue to drive the vehicle until you

on can overheat the braking

OLMB053025

can reach a safe location.

system and cause premature

Check the Parking Brake Warning

wear or damage to brake

Light by placing the POWER button

parts. Make sure the parking

to the ON position (do not start the

brake is released and the

power cell module).

Brake Warning Light is off

before driving.

This light will be illuminated when the

parking brake is applied with the

POWER button in the START or ON

position.

Before driving, be sure the parking

brake is released and the Brake

Warning Light is OFF.

5-20

Anti-lock Brake System (ABS)

ABS is an electronic braking system

(Continued)

that helps prevent a braking skid.

Drive your vehicle at reduced

ABS allows the driver to steer and

WARNING

speeds during the following

brake at the same time.

conditions:

An Anti-Lock Braking System

(ABS) or an Electronic Stability

• Rough, gravel or snow-cov-

ered roads.

Control (ESC) system will not

prevent accidents due to

• On roads where the road sur-

improper or dangerous driving

face is pitted or has different

maneuvers. Even though vehi-

surface height.

cle control is improved during

• Tire chains are installed on

emergency braking, always

your vehicle.

maintain a safe distance

The safety features of an ABS

between you and objects ahead

or ESC equipped vehicle should

5

of you. Vehicle speeds should

not be tested by high speed

always be reduced during

driving or cornering. This could

extreme road conditions. The

endanger the safety of yourself

braking distance for cars

or others.

equipped with ABS or ESC may

be longer than for those without

these systems in the road con-

ditions described below.

(Continued)

5-21

Content   ..  10  11  12  13   ..