Fiat Ulysse (2023 year). Manual in english - page 7

 

  Index      Manuals     Fiat Ulysse (2023 year). Manual in english

 

Search            copyright infringement  

 

   

 

   

 

Content      ..     5      6      7      8     ..

 

 

 

Fiat Ulysse (2023 year). Manual in english - page 7

 

 

Technical data
Towed loads
9
Model codes:
ZZKXZ
Braked trailer (within the GTW limit) (kg)
1,000
on a 10% or 12% gradient
Unbraked trailer (kg)
750
Maximum authorised nose weight (kg)
60
Model codes:
V1ESZ/V1EZZ/VZESZ/VZEZZ
Code:
MEL ZAE BATT S/
MEL ZAE BATT XL
Length
XS, M, XL
(L1/L2/L3)
Braked trailer (within the GTW limit) (kg)
5-6-7-8-9 seats
1,000
on a 10% or 12% gradient
Unbraked trailer (kg)
750
Maximum authorised nose weight (kg)
60
241
Technical data
Tailgate
XL
Dimensions (mm)
These dimensions have been measured on an
unladen vehicle.
Mirrors folded
* Increased payload.
XS
** Increased payload with high body.
*** Depending on country of sale.
Side-hinged doors
M
242
Technical data
XS
9
Mirrors folded
XL
Side-hinged doors
M
* With Moduwork, flap removed.
** Vehicle empty and not loaded.
243
Technical data
Tailgate
XL
* Increased payload.
XS
** Increased payload with high body.
*** Depending on country of sale.
Platform cab
M
244
Technical data
- Gross vehicle weight (GVW).
Identification markings
9
- Gross train weight (GTW).
Various visible markings for vehicle identification
- Maximum weight on the front axle.
and vehicle search.
- Maximum weight on the rear axle.
D. Tyres/paint code label.
Affixed to the driver's door.
Bears the following information about the tyres:
- Tyre pressures, unladen and laden.
- Tyre specification, made up of the dimensions
and type as well as the load and speed indices.
- Spare tyre inflation pressure.
A. Vehicle Identification Number (VIN), under
Also indicates the paint colour code.
the bonnet.
The vehicle may be originally equipped
Stamped on the chassis.
with tyres with higher load and speed
B. Vehicle Identification Number (VIN), on the
indices than those indicated on the label,
dashboard.
without affecting tyre pressure (on cold tyres).
Printed on an adhesive label visible through the
In the event of a change in the type of tyres,
windscreen.
contact a Fiat Dealership for the tyre fits
C. Manufacturer's label.
approved for the vehicle.
Affixed to the centre pillar.
Bears the following information:
- Manufacturer’s name.
- European whole vehicle type approval
number.
– Vehicle Identification number (VIN).
245
Bluetooth® audio system
To avoid discharging the battery, the
Short press: select the preset radio station.
Bluetooth® audio system
audio system may switch off after a few
Long press: preset a radio station.
minutes if the engine is not running.
Radio:
Automatic step by step search up/down
for radio stations.
First steps
Media:
Select previous/next CD, USB, streaming track.
Press: On/Off.
Scroll in a list.
Rotate: adjust volume.
Radio:
Short press: change audio source (radio;
Manual step by step search up/down for
USB; AUX (if equipment connected); CD;
radio stations.
streaming).
Select previous/next MP3 folder.
The different functions and settings
Long press: display the Telephone menu (if a
Media:
described vary according to the version
telephone is connected).
Select previous/next folder/genre/artist/playlist
and configuration of your vehicle.
Adjust audio settings:
on the USB device.
Front/rear fader; left/right balance; bass/
Scroll in a list.
As a safety measure and because it
treble; loudness; audio ambience.
Cancel the current operation.
requires sustained attention by the driver,
Activate/Deactivate automatic volume
Go up one level (menu or folder).
the pairing of a Bluetooth® mobile telephone
adjustment (based on the vehicle’s speed).
Access the main menu.
with the Bluetooth® hands-free system of your
Radio :
audio system must be done with the vehicle
Short press: display the list of radio
Activate/Deactivate TA function (traffic
stationary and the ignition on.
stations.
announcements).
Long press: update the list.
Long press: select type of announcement.
Media :
Your audio system is coded in such a
Selection of FM/DAB/AM wavebands.
Short press: display the list of folders.
way that it will only operate in your
Long press: display the available sorting options.
vehicle.
Select the screen display mode, between:
All work on the system must be carried out
Date; Audio functions; Trip computer;
exclusively by a dealer or qualified workshop,
Telephone.
to avoid any risk of electrocution, fire or
Confirm or display contextual menu.
mechanical faults.
Buttons 1 to 6.
246
Bluetooth® audio system
Long press: reject the call.
Long press: open the "Telephone" menu.
Steering-mounted
10
During a telephone call:
In the event of a telephone call:
controls
Short press: open the contextual telephone
Short press: accept the call.
menu.
Long press: reject the call.
Steering mounted controls -
Long press: end the call.
During a telephone call:
Confirm a selection.
Short press: open the contextual telephone
Type 1
menu.
Increase volume.
Long press: end the call.
Start voice recognition on your
Radio:
Decrease volume.
smartphone via the system.
Select the previous / next preset radio
Radio:
station.
Mute / Restore sound by simultaneously
Short press: display the list of radio
Select the previous / next item in a menu or a
pressing the increase and decrease
stations.
list.
volume buttons.
Long press: update the list.
Media:
Media:
Select the previous / next track.
Steering mounted controls -
Short press: display the list of folders.
Select the previous / next item in a menu or a
Long press: display the available sorting options.
Type 2
list.
Radio:
Radio:
Select the previous / next preset radio
Short press: display the list of radio
station.
stations.
Access to the main menu.
Select the previous / next item in a menu or a
Long press: update the list.
list.
Media:
Increase volume.
Media:
Short press: display the list of folders.
Select the previous / next track.
Long press: display the available sorting options.
Mute / Restore the sound.
Select the previous / next item in a menu or a
Other than telephone call:
list.
Short press: changing audio source
Decrease volume.
Press the thumbwheel: confirm.
(radio; USB; AUX (if equipment connected); CD;
streaming), confirmation if the "Telephone"
Other than telephone call:
Short press: changing audio source
Menus
menu is open.
Long press: open the "Telephone" menu.
(radio; USB; AUX (if equipment connected); CD;
Depending on version.
In the event of a telephone call:
streaming), confirmation if the "Telephone"
"Multimedia": Media settings, Radio
Short press: accept the call.
menu is open.
settings.
247
Bluetooth® audio system
"Telephone": Call, Directory
Press this button to display the list of
Long procedure
management, Telephone management,
stations received locally.
Press the MENU button.
Hang up.
To update this list, press for more than two
"Trip computer".
seconds. The sound is cut while updating.
Select "Audio functions".
"Maintenance": Diagnosis, Warning log,
RDS
Press OK.
etc.
The external environment (hills,
"Connections": Manage connections,
Select the "FM waveband preferences"
buildings, tunnels, car parks,
search for devices.
function.
underground, etc.) may block reception,
"Personalisation-configuration": Define
Press OK.
including in RDS tracking mode. This is a
the vehicle parameters, Choice of
normal effect of the way in which radio waves
language, Display configuration, Choice of units,
Select "Frequency tracking (RDS)".
are transmitted and does not indicate any
Date and time adjustment.
failure of the audio system.
Press the "MENU" button.
Press OK, RDS is displayed on the
screen.
Move from one menu to another.
If RDS is not available, the RDS symbol
appears struck out on the display.
Play TA messages
Enter a menu.
RDS, if activated, allows you to continue
The TA (Traffic Announcement) function
listening to the same station by
gives priority to TA alert messages. To
automatically retuning to alternative
operate, this function needs good reception of
Radio
frequencies. However, in certain conditions,
a radio station that carries this type of
RDS station tracking may not be possible
message. When a traffic report is transmitted,
Selecting a station
nationwide, as radio stations do not always
the current audio source (Radio, CD, etc.) is
Press the SOURCE button repeatedly
cover the entire country. This can explain the
interrupted automatically to play the TA
and select the radio.
loss of reception of a station during a journey.
message. Normal play of the media
Press this button to select a waveband
previously playing is resumed at the end of
(FM / AM / DAB).
the message.
Short procedure
Press one of the buttons for an automatic
In "Radio" mode, press the OK button to activate
search for radio stations.
Take care when increasing the volume
or deactivate RDS directly.
Press one of the buttons to carry out a
while listening to TA messages. The
manual search up / down for radio
volume may prove too high on return to the
frequencies.
original audio source.
248
Bluetooth® audio system
Press the TA button to activate or
When changing region, updating the list
DAB (Digital Audio
10
deactivate traffic messages.
of preset radio stations is recommended.
Broadcasting) radio
Receiving INFO messages
Terrestrial Digital Radio
The INFO function gives priority to TA
Depending on version
alert messages. To be active, this
If the current DAB radio station is not
function needs good reception of a radio
available on FM, "DAB FM" is struck out.
station that transmits this type of message.
Full list of radio stations and "multiplexes".
When a message is transmitted, the current
audio source (Radio, CD, USB, etc.) is
interrupted automatically to receive the INFO
Terrestrial digital radio
message. Normal play of the media
Digital radio provides a superior audio
previously playing is resumed at the end of
quality and also additional categories of
the message.
traffic announcements (TA INFO).
Make a long press on this button to
The different "multiplex / ensemble” services
display the list of categories.
offer a choice of radio stations in alphabetical
Select or deselect categories.
order.
1
Options display: if active but not available, the
display will be struck out.
Change of band (FM1, FM2, DAB, etc.)
Activate or deactivate the reception of the
2
Display showing the name of the current
corresponding messages.
station.
Change of station within the same
Display TEXT INFOS
3
Preset stations, buttons 1 to 6.
"multiplex / ensemble".
Short press: select the preset radio station.
Starting of a search for the previous / next
Radio text is information transmitted by
Long press: memorise a radio station.
"multiplex / ensemble".
the radio station related to the station's
4
Display showing the name of the “multiplex”
Long press: selection of the categories of
current programme or song.
service being used.
news desired among Transport, News,
5
RadioText (TXT) display for the current radio
Entertainment and Special Flash (available
When the radio station is displayed in the
station.
depending on the station).
screen, press OK to display the
6
Represents the signal strength for the band
contextual menu.
being listened to.
Select "RadioText (TXT) display" and
confirm OK to save.
249
Bluetooth® audio system
When the radio station is displayed in the
If the "DAB" station you are listening to is
When the USB socket is used, the
screen , press "OK" to display the
not available on FM ("DAB/FM" option
portable device charges automatically.
contextual menu.
struck out), or if "DAB / FM auto tracking" is
(Frequency search (RDS), DAB / FM auto
not on, the sound will be cut when the digital
Play mode
tracking, RadioText (TXT) display, Information
signal is too weak.
The play modes available are:
on the station, etc.)
- Normal: the tracks are played in order,
depending on the classification of the selected
Media
DAB / FM station tracking
files.
- Random: the tracks in an album or folder are
"DAB" does not have 100% coverage of
USB socket
played in a random order.
the country.
Insert the USB memory stick into the USB
- Random on all media: all of the tracks saved
When the digital signal is weak, "DAB / FM
socket or connect the USB device to the
in the media are played in random order.
auto tracking" allows you to continue
USB socket using a suitable cable (not supplied).
- Repeat: the tracks played are only those from
listening to the same station, by automatically
The system changes automatically to "USB"
the current album or folder.
switching to the corresponding analogue FM
source.
Press this button to display the contextual
station (if it exists).
menu for the Media function.
When the "DAB / FM auto tracking" is active,
To protect the system, do not use a USB
Press this button to select the chosen
the DAB station will be selected automatically.
hub.
play mode.
Press this button to confirm.
Press the MENU button.
Any additional devices connected to the
system must comply with the standard
The choice made is displayed at the top of the
Select "Multimedia" and confirm.
applicable to the product and/or the standard
screen.
IEC 60950-1.
Select "DAB / FM auto tracking" and
Choosing a track to play
confirm.
The system builds playlists (in temporary
Press one of these buttons to go to the
memory); this operation can take from a
If "DAB / FM auto tracking" tracking is
previous / next track.
few seconds to several minutes at the first
enabled, there is a lag of a few seconds
Press one of these buttons to go to the
connection.
when the system switches to the analogue
previous / next folder.
Reduce the number of non-music files and the
FM station sometimes with a change in
number of folders to reduce the waiting time.
volume.
File classification
Playlists are updated every time a new USB
Make a long press on this button to
memory stick is connected.
display the different classifications.
250
Bluetooth® audio system
Select by "Folder" / "Artist" / "Genre" /
applicable to the product and/or the standard
Press the LIST button to display the list of
10
"Playlist".
IEC 60950-1.
tracks on the CD.
Depending on availability and type of device
Press and hold one of these buttons for
Press the SOURCE button several times
used.
fast forward or rewind.
in succession and select "AUX".
Press OK to select the desired
classification, then press OK again to
First adjust the volume on your portable device
Playing an MP3 compilation
(to a high level). Then adjust the volume on your
confirm.
Insert an MP3 compilation in the CD player.
audio system. Controls are managed via the
The audio equipment searches for all of the
Playing files
portable device.
music tracks, which may take anything between
Make a short press on this button to
Do not connect the same device to both
a few seconds and several tens of seconds,
display the chosen classification.
the auxiliary jack socket and the USB
before play begins.
Navigate in the list using the left / right
port at the same time.
On a single disc, the CD player can read
and up / down buttons.
up to 255 MP3 files spread over 8
Confirm the selection by pressing OK.
CD player
directory levels.
However, it is advisable to keep to a limit of
Press one of these buttons to go to the
Insert circular compact discs only.
two levels to reduce the access time before
previous / next track in the list.
Some anti-pirating systems, on original discs
the CD is played.
Press and hold one of these buttons for fast
or CDs copied using a personal recorder, may
The folder structure is not observed during
forward or rewind.
cause faults which are no reflection on the
playback.
Press one of these buttons to go to the
quality of the original player.
All of the files are displayed on a single level.
previous / next "Folder" / "Artist" /
Insert a CD in the player, play begins
"Genre" / "Playlist"* in the list.
automatically.
To play a disc which has already been
External CD players connected via the
inserted, press the SOURCE button
Input AUX socket (AUX)
USB port are not recognised by the
several times in succession and select "CD".
Depending on equipment
Press one of the buttons to select a folder
system.
Connect a portable device (MP3 player,
on the CD.
etc.) to the auxiliary jack socket using an
To play a disc which has already been
Press one of the buttons to select a track
audio cable (not supplied).
inserted, press the SOURCE button
on the CD.
several times in succession and select "CD".
Press the LIST button to display the list of
Any additional devices connected to the
Press one of the buttons to select a track
directories of the MP3 compilation.
system must comply with the standard
on the CD.
* Depending on availability and the type of device used.
251
Bluetooth® audio system
Press and hold one of these buttons for
Information and advice
In the particular case of a multi-session CD, the
fast forward or rewind.
Joliet standard is recommended.
The CD player can play audio files with “.mp3”,
To protect the system, do not use a USB hub.
“.wma”, “.wav” and “.aac” file extensions, with a
Bluetooth® audio streaming
bit rate of 32 to 320 Kbps.
Only use USB memory sticks formatted
Streaming allows music files on the telephone to
It also supports TAG mode (ID3 tag, WMA TAG).
to FAT 32 (File Allocation Table).
be played via the vehicle's speakers.
No other file types (".mp4", etc.) can be read.
Connect the telephone.
Files of the ".wma" type should be to the wma 9
It is recommended that you use genuine
(Refer to the "Pairing a Bluetooth® telephone"
standard.
Apple® USB cables to guarantee correct
section).
The sampling rates supported are 11, 22, 44 and
operation.
Activate the streaming source by pressing
48 kHz.
SOURCE.
Via the USB socket, the system can play audio
In certain cases, playback of the audio files must
files with the extension “.mp3”, “.wma”, “.wav”,
be initiated from the keypad.
Telephone
“.cbr”, “.vbr" with a bit rate of 32 to 320 Kbps.
Audio files can be selected using the buttons on
No other file types (".mp4", etc.) can be read.
the audio system control panel and the steering-
Pairing a Bluetooth®
Files of the ".wma" type should be to the wma 9
mounted controls. The contextual information
standard.
telephone
can be displayed on the screen.
The sampling rates supported are 11, 22, 44 and
If the telephone supports the function. The audio
48 kHz.
As a safety measure and because it
quality depends on the quality of transmission by
File names should have fewer than 20
requires sustained attention by the driver,
the telephone.
characters, avoiding special characters (e.g.
the pairing of a Bluetooth® mobile telephone
« ? ; ù) so as to avoid any reading or display
with the Bluetooth® hands-free system of your
Connecting Apple® players
problems.
audio system must be done with the vehicle
Connect the Apple® player to the USB socket
In order to be able to play a burned CDR or
stationary and the ignition on.
using a suitable cable (not supplied).
CDRW, select ISO 9660 standards level 1, 2, or
Play starts automatically.
Joliet, if possible, when burning the CD.
Activate the telephone's Bluetooth®
Control is via the audio system.
If the disc is burned in another format, it may not
function and ensure that it is "visible to
The classifications available are those of the
be played correctly.
all" (telephone configuration).
portable device connected (artists / albums /
It is recommended that the same burning
genres / playlists).
standard always be used on an individual disc,
The version of software in the audio system may
with the lowest speed possible (4x maximum) for
not be compatible with the generation of your
the best acoustic quality.
Apple® player.
252
Bluetooth® audio system
The services available depend on the
Completing the pairing
Press the MENU button.
10
network, the SIM card and the
To complete the pairing, whichever
compatibility of the Bluetooth® devices used.
Select "Connections".
procedure is used (from the telephone or
Refer to your telephone’s user guide and your
from the system), confirm that the code is the
service provider to check which services you
Press OK to confirm.
same in the system and in the telephone and
are able to access.
validate.
Select "Bluetooth Connections
management" and confirm. The list of
Procedure from the telephone
If pairing fails, the number of attempts is not
paired telephones is displayed.
restricted.
Select the name of the system in the list
Press OK to confirm.
A message appears on the screen confirming
of detected devices.
the pairing.
If the pairing procedure fails, we
Indicates that a device is connected.
recommend deactivating and then
Information and advice
reactivating the Bluetooth® function on the
The "Telephone" menu provides access to the
A number indicates the profile of the
telephone.
following functions in particular: "Directory", if
connection with the system:
your telephone is fully compatible, "Calls list",
- 1 for media or 1 for telephone.
"Consult the paired devices".
- 2 for media and telephone.
Procedure from the system
Depending on the type of telephone, you may be
Press the MENU button.
asked to accept or confirm access by the system
Indicates connection of the audio
to each of these functions.
steaming profile.
Select "Connections".
Indicates connection of the hands-free
Go to the Brand's website for more
telephone profile.
Confirm with OK.
information (compatibility, more help,
Select a telephone.
etc.).
Select "Search for a device".
Press OK to confirm.
Managing connections
Confirm with OK.
Then select and confirm:
The telephone connection automatically
A window is displayed with a search in progress
includes hands free operation and audio
- "Connect telephone"/"Disconnect
message.
streaming.
telephone" : to connect/disconnect the
In the list of devices detected, select a telephone
The ability of the system to connect to just
telephone or the hands-free kit only.
to pair. Only one telephone can be paired at a
one profile depends on the telephone. Both
- "Connect media player"/"Disconnect media
time.
profiles may connect by default.
player" : to connect/disconnect streaming only.
253
Bluetooth® audio system
- "Connect telephone + media
Press this button for more than two
Confirm with OK.
player"/"Disconnect telephone + media
seconds for access to your directory, then
player" : to connect/disconnect the telephone
navigate using the thumb wheel.
(hands-free kit and streaming).
Microphone off
- "Delete connection": to delete the pairing.
Ending a call
(so that the caller cannot hear)
In the "Telephone" menu.
In the contextual menu:
When you delete a pairing in the system,
Select "End call".
remember to delete it from your
Confirm with OK to end the call.
- select "Micro OFF" to switch off the
telephone as well.
During a call, press one of these buttons
microphone.
Press OK to confirm.
for more than two seconds.
- deselect "Micro OFF" to switch the
microphone on.
The system accesses the telephone's
Confirm with OK.
contacts directory, depending on its
Receiving a call
compatibility, and while it is connected via
An incoming call is announced by a ring and a
Bluetooth.
Telephone mode
superimposed display in the screen.
In the contextual menu:
Select the "YES" tab in the screen using
With certain telephones connected by
the buttons.
Bluetooth you can send a contact to the
- select "Telephone mode" to transfer the
Confirm with OK.
directory of the audio system.
call to the telephone (for example, to leave the
Contacts imported in this way are saved in a
vehicle while continuing a conversation).
Press this button at the steering mounted
permanent directory visible to all, whatever
- deselect "Telephone mode" to transfer the
controls to accept the call.
the telephone connected.
call to the vehicle.
The menu for the directory is not accessible if
Confirm with OK.
Making a call
it is empty.
In the "Telephone" menu.
If the contact has been cut off, when you
Select "Call".
reconnect on returning to the vehicle,
Select "Dial".
Managing calls
the Bluetooth connection will be restored
Or
During a call, press OK to display the
automatically and sound returned to the
Select "Directory".
contextual menu.
system (depending on the compatibility of the
Or
telephone).
Select "Calls list".
End call
In some cases, the Telephone mode must be
Confirm with OK.
In the contextual menu, select "Hang up"
activated from the telephone.
to end the call.
254
Bluetooth® audio system
Interactive voice response
compatibility, and while it is connected via
With the engine off, the audio system
10
From the contextual menu, select "DTMF
Bluetooth.
switches off after a few minutes of use.
tones" and confirm to use the digital
With certain telephones connected by
When the engine is switched off, the audio
keypad to navigate in the interactive voice
Bluetooth you can send a contact to the
system operating time depends on the state of
response menu.
directory of the audio system.
charge of the battery.
Confirm with OK.
Contacts imported in this way are saved in a
The switch-off is normal: the audio system
permanent directory visible to all, whatever the
switches to economy mode and switches off to
telephone connected.
avoid discharging the vehicle's battery.
Consultation call
The menu for the directory is not accessible if it
► Start the vehicle’s engine to increase the
From the contextual menu, select
is empty.
charge of the battery.
"Switch" and validate to return to a call
The message "the audio system is
Voice recognition
overheated" is displayed onscreen.
left on hold.
Confirm with OK.
This function allows you to use your
To protect the installation if the ambient
smartphone's voice recognition via the system.
temperature is too high, the audio system
To start voice recognition, depending on the type
switches to an automatic thermal protection
Directory
of steering mounted controls:
mode, in which the volume may be decreased or
Make a long press on the end of the lighting
the CD player stopped.
To access the directory, press and hold
control stalk.
► Switch the audio system off for a few minutes
SRC/TEL.
OR
to allow the system to cool.
Select "Directory" to see the list of
contacts.
Press this button.
Radio
Confirm with OK.
There is a difference in sound quality
Voice recognition requires the use of a
To modify the contacts saved in the
between the different audio sources (radio,
compatible smartphone first connected to
system, press MENU then select
CD, etc.).
the vehicle by Bluetooth.
"Telephone" and confirm.
For optimal listening quality, the audio settings
Select "Directory management" and confirm.
(Volume, Bass, Treble, Ambience and Loudness)
You can:
can be adjusted to different audio sources,
Frequently asked
- "Consult an entry",
resulting in audible differences when switching
- "Delete an entry",
questions
between sources (radio, CD, etc.).
- "Delete all entries".
► Check that the audio settings (Volume, Bass,
The following information groups together the
The system accesses the telephone's
Treble, Ambience and Loudness) are appropriate
answers to the most frequently asked questions
contacts directory, depending on its
to the sources being listened to. We recommend
concerning your audio system.
setting the audio functions (Bass, Treble, Fr-Re
255
Bluetooth® audio system
balance and Le-Ri balance) to the middle
The aerial is absent or has been damaged (for
► Check the condition of the CD: the CD cannot
position, setting the musical ambience to "None",
example when going through an automatic car
be played if it is too badly damaged.
setting loudness correction to "Active" in CD
wash or in an underground car park).
► Check the content in the case of a burned
mode and "Inactive" in Radio mode.
► Have the aerial checked by a dealer.
CD: read the recommendations in the "Audio"
The preset stations do not function (no
The sound intermittently cuts out for 1 or 2
section.
sound, 87.5 MHz is displayed, etc.).
seconds in radio mode.
Due to poor quality, certain burned CDs will not
The wrong waveband is selected.
During this brief sound cut-out, the RDS
be played by the audio system.
► Press the BAND button to return to the
searches for another frequency giving better
The CD audio quality is is poor.
waveband (FM, FM2, DAB, AM) on which the
reception of the station.
The CD is scratched or of poor quality.
stations are preset.
► Switch off the RDS function if the
► Insert good quality CDs and store them in
Traffic announcement (TA) is shown but I
phenomenon occurs too frequently and always
suitable conditions.
receive no traffic information.
on the same route.
The audio settings (bass, treble, ambience) are
The radio station is not part of the regional traffic
unsuitable.
information network.
Media
► Return bass and treble settings to 0, without
► Tune to a radio station that broadcasts traffic
The Bluetooth connection is cut.
selecting an ambience.
information.
The battery in the peripheral device may not be
I am unable to play the music files on my
The reception quality of the tuned radio
sufficiently charged.
smartphone via the USB port.
station gradually deteriorates or the station
► Charge the battery in the peripheral device.
Depending on the smartphone, access by the
presets are inoperative (no sound, 87.5 MHz
The message "USB device error" is displayed
audio system to music on the smartphone may
is displayed, etc.).
in the screen.
have to be approved on the latter.
The vehicle is too far from the selected station’s
The USB stick has not been recognised, or may
► Manually activate the MTP profile on the
transmitter, or no transmitter is present in the
be corrupted.
smartphone (USB settings menu).
geographical area.
► Reformat the USB memory stick.
► Activate the RDS function to allow the system
The CD is systematically ejected or is not
Telephone
to check for a more powerful transmitter in the
played.
I am unable to access my voicemail.
area.
The CD is upside down, cannot be read, does
Few telephones or service providers allow the
The environment (hills, buildings, tunnels,
not contain audio files or contains audio files of a
use of this function.
basement car parks, etc.) may block reception,
format not recognised by the audio system.
► Call your voicemail, via the telephone menu,
including in RDS mode.
The CD is protected by an anti-pirating system
using the number provided by your operator.
This is a perfectly normal phenomenon, and is
not recognised by the audio system.
I am unable to access my directory of
not indicative of an audio system malfunction.
► Check that the CD is inserted in the player
contacts.
the right way up.
► Check the compatibility of your telephone.
256
Bluetooth® audio system
You did not grant access to your contacts when
10
pairing the telephone.
► Accept or confirm access by the system to
the contacts on your telephone.
I am unable to continue a conversation when
getting into my vehicle.
Handset mode is activated.
► Deselect handset mode to transfer the call to
the vehicle.
I am unable to pair my telephone by
Bluetooth.
Telephones (models, versions of operating
systems) have their own specificities in the
pairing procedure and some telephones are not
compatible.
► Before starting the pairing procedure, delete
the telephone pairing from the system and the
system pairing from the telephone, in order to
view the compatibility of the telephones.
257
Connect Radio
- Changing the system settings and
At all times it is possible to display the rolling
Connect Radio
configuration.
menus by pressing the screen briefly with three
fingers.
The system is protected so that it only
All touch-sensitive areas on the screen are
operates in the vehicle.
white.
The message Energy economy mode is
On pages with multiple tabs at the bottom of the
displayed when the system is about to go into
screen, you can switch between pages either
standby.
by tapping the tab for the desired page or by
swiping the pages to the left or right with your
finger.
The system’s Open Source Software
Press in the shaded area to go back up a level
(OSS) source codes are available at the
or confirm.
following addresses:
Press the back arrow to go back a level or
Multimedia audio system -
confirm.
Applications - Bluetooth®
The touch screen is of the "capacitive"
telephone
type.
First steps
To clean the screen, use a soft, non-abrasive
The functions and settings described
cloth (e.g. spectacles cloth) with no additional
With the engine running, a press mutes
vary according to the vehicle version and
product.
the sound.
configuration, as well as the country of sale.
Do not use sharp objects on the screen.
With the ignition off, a press turns the system on.
Do not touch the screen with wet hands.
Increase or decrease the volume using
For safety reasons and because they
the wheel or the "plus" or "minus" buttons
Certain information is displayed permanently in
require sustained attention by the driver,
(depending on the equipment).
the upper bar of the touch screen:
the following operations must be carried out
Use the buttons on either side of or below the
- Air conditioning status information (depending
with the vehicle stationary and the ignition
touch screen to access the menus, then press
on version), and direct access to the
on:
the virtual buttons on the touch screen.
corresponding menu.
- Pairing the smartphone with the system via
Depending on the model, use the "Source" and
- Radio Media and Telephone menu status
Bluetooth.
"Menu" buttons on the left of the touch screen to
information.
- Using the smartphone.
access the menus, then press the virtual buttons
- Privacy status information.
- Connecting to the CarPlay® or Android
on the touch screen.
- Access to the touch screen and digital
Auto applications (certain applications stop
instrument panel settings.
displaying when the vehicle is moving).
258
Connect Radio
Audio source selection (depending on
enter standby mode (with the screen and
Confirm a selection.
11
equipment):
sound off) for 5 minutes or more.
- FM/DAB/AM radio stations (depending on
The system will resume normal operation
Increase volume.
equipment).
when the temperature in the passenger
- Telephone connected via Bluetooth and
compartment has dropped.
Decrease volume.
Bluetooth multimedia broadcast (streaming).
- USB Memory stick.
Mute/restore sound by simultaneously
- Media player connected via the auxiliary
Steering-mounted
pressing the increase and decrease
socket (depending on equipment).
volume buttons.
controls
Steering mounted controls -
Steering mounted controls -
Type 2
Type 1
Voice control:
Radio:
This control is located on the steering
Select the previous/next preset radio
wheel or at the end of the lighting control stalk
station.
(depending on equipment).
Select the previous/next item in a menu or a list.
Short press: smartphone voice commands via
Media:
the system.
In the "Settings" menu, it is possible to
Select the previous/next track.
Increase volume.
create a profile for an individual or for a
group of people with shared interests, and
Select the previous/next item in a menu or a list.
Radio:
Decrease volume.
configure a wide range of settings (radio
Short press: display the list of radio
Mute by pressing the volume increase
presets, audio settings, ambiences, etc.).
stations.
and decrease buttons simultaneously
Settings are applied automatically.
Long press: update the list.
(depending on equipment).
Media:
Restore the sound by pressing one of the two
In very hot conditions, the volume may
Short press: display the list of folders.
volume buttons.
be limited to protect the system. It may
Long press: display the available sorting options.
Media (short press): change the
Change audio source (radio; USB; AUX if
multimedia source.
equipment connected; CD; streaming).
Telephone (short press): start telephone
call.
259
Connect Radio
Call in progress (short press): access
Radio Media
Settings
telephone menu.
Telephone (long press): reject an incoming call,
end call; when no call is in progress, access
telephone menu.
Radio (rotate): automatic search for the
previous/next station.
Media (rotate): previous/next track, move
through a list.
Short press: confirm a selection; if nothing
selected, access presets.
Radio: display the list of stations.
Media: display the list of tracks.
Select an audio source or radio station.
Configure a personal profile and/or
Radio (press and hold): update the list of
configure the sound (balance, ambience,
detected stations.
etc.) and the display (language, units, date, time,
Telephone
etc.).
Menus
Driving
Applications
Connect a mobile phone via Bluetooth®.
Run certain applications from a
smartphone connected via CarPlay® or Android
Activate, deactivate or configure certain
Auto.
vehicle functions.
Access configurable equipment.
260
Connect Radio
Navigation
Applications
Press this button to search and select a
11
recipient.
Select the "Quick messages” tab.
Viewing photos
Insert a USB memory stick in the USB port.
Press this button to select the display
settings for messages.
To protect the system, do not use a USB
Press this button to write a new message.
hub.
The system can read folders and image files in
Press the bin alongside the selected
the formats: .tiff; .gif; .jpg/jpeg; .bmp and .png.
message to delete it.
Press Applications to display the main
Press this button alongside the selected
page.
message to display the secondary page.
Configure the navigation and select your
Press "Photos".
Press this button to edit and modify the
destination via CarPlay® or Android Auto.
existing text.
Select a folder.
Press this button to write a new message.
Air conditioning
Select an image to view.
Press the bin to delete the message.
Press this button to display the details of
the photo.
Radio
Press the back arrow to go back a level.
18,5
21,5
Selecting a station
Managing messages
Press Radio Media to display the main
Press Applications to display the main
page.
page.
Press one of the buttons to perform an
Press "SMS".
automatic search for radio stations.
Manage various temperature and air flow
Or
settings.
Select the "SMS” tab.
Move the slider to manually search for
frequencies up or down.
Press this button to select the display
Or
settings for messages.
Press the frequency.
261
Connect Radio
Enter the FM and AM waveband values
Or
Press the "OPTIONS" button to access the
using the virtual keypad.
Select a radio station or frequency.
secondary page.
Press "OK" to confirm.
Press "Preset".
Activate/deactivate "News".
Make a long press on one of the buttons
to preset the station.
Press in the shaded area to confirm.
Radio reception may be affected by the
use of electrical equipment not approved
Activating/Deactivating RDS
by the Brand, such as a USB charger
RDS, if activated, allows you to continue
Playing TA messages
connected to the 12 V socket.
listening to the same station by automatically
The TA (Traffic Announcement) function gives
The exterior environment (hills, buildings,
retuning to alternative frequencies.
priority to TA alert messages. To operate, this
tunnels, basement car parks, etc.) may
Press Radio Media to display the main
function needs good reception of a radio station
block reception, including in RDS mode.
page.
that transmits this type of message. While traffic
This phenomenon is perfectly normal in the
Press the "OPTIONS" button to access the
information is being broadcast, the current
context of radio wave transmission, and
secondary page.
media is automatically interrupted so that the
in no way indicative of an audio system
Activate/deactivate "RDS".
TA message can be heard. Normal play of the
malfunction.
previously playing media resumes at the end of
Press in the shaded area to confirm.
the message.
Changing the waveband
Press Radio Media to display the main
Press Radio Media to display the main
page.
RDS station tracking may not be
page.
Press the "OPTIONS" button to access the
available nationwide, as many radio
Press the "OPTIONS" button to access the
secondary page.
stations do not cover 100 % of the country.
secondary page.
Activate/deactivate "TA".
This explains the loss of reception of the
Press "Band" to change waveband.
station during a journey.
Press in the shaded area to confirm.
Press in the shaded area to confirm.
Displaying text information
Audio settings
The "Radio Text" function displays information
Presetting a station
transmitted by the radio station relating to the
Press Radio Media to display the main
Select a radio station or frequency.
station or the currently playing song.
page.
Make a short press on the star outline. If
Press Radio Media to display the main
Press the "OPTIONS" button to access the
the star is solid, the radio station is
page.
secondary page.
already preset.
Press "Audio settings".
262
Connect Radio
Select the "Tone", "Balance", "Sound",
Press in the shaded area to confirm.
DAB (Digital Audio
11
"Voice" or "Ringtones" tab to configure
the sound settings.
Broadcasting) radio
If "FM-DAB Follow-up" is activated, there
Press the back arrow to confirm.
Terrestrial Digital Radio
may be a time offset of a few seconds
when the system switches to "FM" analogue
In the "Tone" tab, the Ambience, Bass,
Terrestrial Digital Radio
radio, and in some cases a change in volume.
Medium and Treble sound settings are
When the digital signal quality is restored, the
Digital radio provides higher quality sound.
different and independent for each audio
system automatically changes back to "DAB".
The various "multiplexes/ensembles" offer a
source.
To minimise this time lag, storing radio
choice of radio stations organised in alphabetical
In the "Balance” tab, the All passengers,
stations in the "DAB" band is recommended.
order.
Driver and Front only settings are common
Press Radio Media to display the main
to all sources.
If the "DAB" station being listened to is
page.
In the "Sound” tab, activate or deactivate
not available on "FM", or if "FM-DAB
Press the "OPTIONS" button to access the
"Volume linked to speed", "Auxiliary input"
Follow-up" is not activated, the sound will cut
secondary page.
and "Touch tones".
out when the digital signal becomes too weak.
Press "Band" to select "DAB band".
The balance/distribution (or spatialisation
Press in the shaded area to confirm.
Media
processing to adjust the sound quality
according to the number of passengers in the
FM-DAB Follow-up
USB port
vehicle.
"DAB" does not cover 100% of the territory.
Insert the USB memory stick into the USB
When the digital radio signal is poor, the
port or connect the USB device to the
"FM-DAB Follow-up" enables you to continue
USB port using a suitable cable (not supplied).
optimises the sound distribution inside
listening to the same station by automatically
the passenger compartment.
switching to the corresponding "FM" analogue
To protect the system, do not use a USB
station (if there is one).
hub.
Press Radio Media to display the main
The system builds playlists (in temporary
page.
memory); this operation can take from a
Press the "OPTIONS" button to go to the
few seconds to several minutes at the first
secondary page.
connection.
Activate/deactivate "FM-DAB Follow-up".
263
Connect Radio
Reduce the number of non-music files and the
If play does not start automatically, it may be
Information and advice
number of folders to reduce the waiting time.
necessary to start the audio playback from the
The system supports USB mass storage
Playlists are updated whenever the ignition
smartphone.
devices, BlackBerry® devices or Apple® players
is switched off or a USB memory stick is
Control is from the portable device or by using
via the USB ports. The adapter cable is not
connected. The audio system memorises these
the system's touch buttons.
supplied.
lists, which will subsequently load faster if they
Once connected in Streaming mode, the
Devices are managed using the audio system
have not been changed.
smartphone is considered to be a media
controls.
source.
Other devices, not recognised on connection,
Auxiliary (AUX) jack socket
must be connected to the auxiliary socket using
Depending on equipment
a jack cable (not supplied) or via Bluetooth
Connect a portable device (MP3 player,
Connecting Apple® players
streaming, if compatible.
etc.) to the auxiliary jack socket using an
Connect the Apple® player to the USB socket
audio cable (not supplied).
To protect the system, do not use a USB
using a suitable cable (not supplied).
This source is only available if "Auxiliary input"
hub.
Play starts automatically.
has been selected in the audio settings.
Control is via the audio system.
The audio system will only play audio files with
First adjust the volume on the portable device
The classifications available are those of
".wav", ".wma", ".aac", ".ogg" and ".mp3" file
(to a high level). Then adjust the volume of the
the portable device connected (artists/
extensions, at bit rates between 32 Kbps and
audio system.
albums/genres/playlists/audio books/
320 Kbps.
Controls are managed via the portable device.
podcasts). It is also possible to use a
It also supports VBR (Variable Bit Rate) mode.
classification structured in the form of a
No other file types (".mp4", etc.) can be read.
Selecting the source
library.
All ".wma" files must be standard WMA 9 files.
Press Radio Media to display the main
The default classification used is by artist. To
The supported sampling rates are 11, 22, 44 and
page.
modify the classification used, return to the
48 KHz.
Press the "SOURCES" button.
first level of the menu then select the desired
To avoid reading and display problems, we
Select the source.
classification (playlists for example) and
recommend choosing file names less than 20
confirm to go down through the menu to the
characters long that do not contain any special
BluetoothStreaming®
desired track.
characters (e.g. “ ? . ; ù).
Streaming allows you to listen to the audio feed
Use only USB memory sticks in FAT32 format
from your smartphone.
The version of software in the audio system may
(File Allocation Table).
The Bluetooth profile must be activated.
not be compatible with the generation of the
First adjust the volume on the portable device
We recommend using the original USB
Apple® player.
(to a high level). Then adjust the volume of the
cable for the portable device.
system.
264
Connect Radio
Telephone
On connecting the USB cable, the
Android Auto smartphone
11
CarPlay® function deactivates the
connection
USB sockets
system's Bluetooth® mode.
The "CarPlay" function requires the use of
Depending on country.
Depending on equipment, for more information
a compatible smartphone and compatible
On the smartphone, download the
on the USB sockets compatible with CarPlay® or
applications.
Android Auto application.
Android Auto applications, refer to the "Ease of
use and comfort" section.
The "Android Auto" function requires the
Connect the USB cable. The smartphone
use of a compatible smartphone and
For the list of compatible smartphones,
charges when connected by the USB
applications.
visit the Manufacturer's website in your
cable.
country.
From the system, press Telephone to
display the CarPlay® interface.
Telephone not connected by
Synchronising a smartphone enables
Or
Bluetooth®
If the smartphone has already connected
users to display applications that support
Connect a USB cable. The smartphone
by Bluetooth®.
the smartphone’s CarPlay® or Android Auto
charges when connected by a USB cable.
Connect the USB cable. The smartphone
technology on the vehicle’s screen. For
From the system, press "Telephone" to
charges when connected by the USB
CarPlay® technology, the CarPlay® function
display the main page.
cable.
must first be activated on the smartphone.
Press "Android Auto" to start the
From the system, press "Telephone" to
Unlock the smartphone for the communication
application in the system.
display the main page.
process between the smartphone and the
Depending on the smartphone, it may be
Press the "PHONE" button to go to the
system to work.
necessary to activate the "Android Auto"
secondary page.
As principles and standards are constantly
function.
Press "CarPlay" to display the CarPlay®
changing, we recommend keeping the
During the procedure, several screen
interface.
smartphone's operating system up-to-
pages relating to certain features are
date, together with the date and time on
When the USB cable is disconnected
displayed.
the smartphone and the system.
and the ignition is switched off then back
Accept to start and complete the connection.
on, the system will not automatically switch to
When connecting a smartphone to the
Radio Media mode; the source must be
system, we recommend enabling
CarPlay® smartphone
changed manually.
Bluetooth® on the smartphone.
connection
The CarPlay® navigation can be accessed
Telephone connected by Bluetooth®
Depending on country.
at any time by pressing the system's
From the system, press "Telephone" to
Navigation button.
display the main page.
265
Connect Radio
Press the "PHONE" button to display the
If the pairing procedure fails, we
Depending on the type of telephone, you may by
secondary page.
recommend deactivating and then
prompted to accept the transfer of contacts and
Press "Android Auto" to start the
reactivating the Bluetooth function on the
messages.
application in the system.
telephone.
The ability of the system to connect just
Access to the different audio sources remains
one profile depends on the telephone.
available in the margin of the Android Auto
Procedure from the telephone
All three profiles may connect by default.
display, using the touch buttons located in the
Select the name of the system in the list
upper bar.
of detected devices.
The profiles compatible with the system
Access to the menus for the system is possible
In the system, accept the connection request
are: HFP, OPP, PBAP, A2DP, AVRCP,
at any time using the dedicated buttons.
from the telephone.
MAP and PAN.
There may be a pause before
applications become available,
Procedure from the system
Visit the Brand's website for more information
depending on the quality of the network.
(compatibility, additional help, etc.).
Press Telephone to display the main
page.
Automatic reconnection
Press "Bluetooth search".
Pairing a Bluetooth®
On returning to the vehicle, if the last telephone
The list of detected telephones is
telephone
connected is present again, it is automatically
displayed.
recognised and within about 30 seconds
Select the name of the chosen telephone
The services available depend on the
after switching on the ignition, the pairing is
in the list.
network, the SIM card and the
established automatically (Bluetooth activated).
compatibility of the Bluetooth devices used.
Connection sharing
To modify the connection profile:
Consult the telephone user guide and the
Press Telephone to display the main
The system offers to connect the telephone with
service provider to check which services are
page.
3 profiles:
available.
Press the "PHONE" button to access the
- "Telephone" (hands-free kit, telephone only),
secondary page.
The Bluetooth function must be activated and
- “Streaming" (streaming: wireless playing of
Press "Bluetooth connection" to
the telephone configured as "Visible to all” (in the
audio files on the telephone),
display the list of paired devices.
telephone settings).
- "Mobile internet data".
Press the "Details" button for a paired
To complete the pairing, whichever procedure is
Select one or more profiles.
device.
used (from the telephone or from the system),
Select one or more profiles.
ensure that the code is the same in the system
Press "OK" to confirm.
and in the telephone.
266
Connect Radio
Press "OK" to confirm.
on the steering mounted PHONE button
Press "Call".
11
to reject the call.
Or
Managing paired telephones
Press "End call".
Calling a recently used
This function lets you connect or disconnect a
number
device or delete a pairing.
Press Telephone to display the main
Press Telephone to display the main
Making a call
page.
page.
Using the telephone is not recommended
Or
Press the "PHONE" button to access the
while driving.
Press and hold
secondary page.
Parking the vehicle.
Press "Bluetooth connection" to
Make the call using the steering mounted
the steering mounted button.
display the list of paired devices.
controls.
Press on the name of the telephone
Press "Recent calls".
selected in the list to disconnect it.
Select the desired contact from the displayed list.
Press again to connect it.
Calling a new number
It is always possible to make a call
Press Telephone to display the main
Deleting a telephone
directly from the telephone; as a safety
page.
Press the basket at the top right of the
measure, first park the vehicle.
Enter the phone number using the digital
screen to display a basket alongside the
keypad.
telephone chosen.
Press "Call" to start the call.
Setting the ringtone
Press the basket alongside the telephone
chosen to delete it.
Press Telephone to display the main
page.
Calling a contact
Receiving a call
Press the "OPTIONS" button to access the
Press Telephone to display the main
secondary page.
An incoming call is announced by a ring and a
page.
Press "Ring volume" to display the
superimposed display in the screen.
Or press and hold
volume bar.
Make a short press on the steering
Press the arrows or move the slider to set
mounted PHONE button to accept an
the steering mounted PHONE button.
the ring volume.
incoming call.
And
Press "Contacts".
Make a long press
Select the desired contact from the displayed list.
267
Connect Radio
Settings
Modifying system settings
Press Settings to display the main page.
Press Settings to display the main page.
Press "Configuration" to access the
Configuring profiles
secondary page.
Press "Configuration" to access the
Press Settings to display the main page.
Press "Screen configuration".
secondary page.
Press "System configuration".
Press "Profiles".
Press "Brightness".
Move the slider to adjust the brightness of
Press the "Units" tab to change the units of
Select "Profile 1", "Profile 2", "Profile 3” or
the screen and/or the instrument panel
distance, fuel consumption and temperature.
"Common profile".
(depending on version).
Press the "Factory settings" tab to restore the
Press this button to enter a name for the
Press the back arrow to confirm.
initial settings.
profile using the virtual keypad.
Press "OK" to save.
Returning the system to factory settings
Press "Animation".
activates the English language by default
Activate or deactivate: “Automatic
Press the back arrow to confirm.
(depending on version).
scrolling”.
Select "Animated transitions".
Press this button to activate the profile.
Press the "System info" tab to display the
versions of the various modules installed in the
Press the back arrow to confirm.
Press the back arrow again to confirm.
system.
Press the "Privacy" tab,
Press this button to reset the selected
or
Selecting the language
profile.
Press Settings to display the main page.
Press Settings to display the main page.
Adjusting the brightness
Press "Privacy" to activate or deactivate
Press "Configuration" to access the
the private data mode.
Press Settings to display the main page.
secondary page.
Activate or deactivate:
Select "Language" to change the
Press Brightness.
language.
- "No sharing (data, vehicle position)".
Press the back arrow to confirm.
- "Only data sharing
Move the slider to adjust the brightness of
- "Data and vehicle position sharing"
the screen and/or the instrument panel
Press the back arrow to confirm.
(depending on version).
Setting the time
Press in the shaded area to confirm.
Press Settings to display the main page.
268
Connect Radio
Press "Configuration" to access the
Press this button to set the date.
The environment (hills, buildings, tunnels,
11
secondary page.
basement car parks, etc.) is blocking reception,
Press "Date and time".
Press the back arrow to save the date.
including in RDS mode.
This is a perfectly normal phenomenon, and is
Select "Time".
Select the display format for the date.
not indicative of an audio system malfunction.
Press this button to set the time using the
The aerial is missing or has been damaged
virtual keypad.
Press the back arrow again to confirm.
(for example while entering a car wash or
Press "OK" to save the time.
underground car park).
► Have the aerial checked by a dealer.
Time and date setting is only available if
Press this button to set the time zone.
I cannot find some radio stations in the list of
"GPS Synchronisation:" is deactivated.
received stations.
Select the display format for the time
The name of the radio station changes.
(12h/24h).
The station is no longer received or its name has
Frequently asked
Activate or deactivate summer time (+1
changed in the list.
hour).
questions
► Press the round arrow on the "List" tab on the
Activate or deactivate GPS
"Radio" page.
The following information groups together the
synchronisation (UTC).
Some radio stations send other information
answers to the most frequently asked questions
Press the back arrow to save the settings.
in place of their name (the title of the song for
concerning the system.
example).
The system interprets these details as the station
The system may not automatically
Radio
name.
manage the change between winter and
The reception quality of the tuned radio
► Press the round arrow on the "List" tab on the
summer time (depending on the country of
station gradually deteriorates or the station
"Radio" page.
sale).
presets are not working (no sound, 87.5 MHz
is displayed, etc.).
Media
The vehicle is too far from the selected station’s
Setting the date
Playback of my USB memory stick starts only
transmitter, or no transmitter is present in the
Press Settings to display the main page.
after a very long wait (around 2 to 3 minutes).
geographical area.
Some files supplied with the memory stick may
► Activate the "RDS" function in the upper bar
Press "Configuration" to access the
greatly slow down access to reading the memory
to enable the system to check whether there is
secondary page.
stick (multiplication by 10 of the cataloguing
a more powerful transmitter in the geographical
Press "Date and time".
time).
area.
Select "Date".
269
Connect Radio
► Delete the files supplied with the memory
Android Auto and CarPlay may not activate if the
Selecting an ambience imposes the treble and
stick and limit the number of sub-folders in the
USB cables are of poor quality.
bass settings, and vice versa.
file structure on the memory stick.
► Use genuine USB cables to ensure
► Modify the treble and bass or ambience
Some characters in information about the
compatibility.
settings to obtain the desired musical ambience.
currently playing media are not displayed
Android Auto and/or CarPlay do not work.
When the balance settings are changed, the
correctly.
Android Auto and CarPlay are not available in all
distribution is deselected.
The audio system is unable to process certain
countries.
When the distribution setting is changed, the
types of character.
► Check the Google Android Auto or Apple
balance settings are deselected.
► Use standard characters to name tracks and
website to see which countries are supported.
Selecting a distribution setting imposes the
folders.
The volume of the telephone connected in
balance settings, and vice versa.
Playback of streaming files does not start.
Bluetooth mode is inaudible.
► Modify the balance setting or the distribution
The connected device does not automatically
The volume depends on both the system and the
setting to obtain the desired sound quality.
launch playback.
telephone.
There is a difference in sound quality
► Start playback from the device.
► Increase the volume of the audio system, to
between audio sources.
Track names and playing times are not
maximum if required, and increase the volume of
To allow for optimal listening quality, the sound
displayed on the audio streaming screen.
the telephone if necessary.
settings can be tailored to different audio
The Bluetooth profile does not allow the transfer
Ambient noise affects the quality of the
sources, which can generate audible differences
of this information.
telephone call.
when changing source.
► Reduce ambient noise (close windows, turn
► Check that the sound settings are appropriate
Telephone
down ventilation, slow down, etc.).
to the sources listened to. Adjust the sound
I cannot connect my Bluetooth telephone.
The contacts are not listed in alphabetical
functions to the middle position.
The telephone's Bluetooth function may be
order.
When the engine is off, the system switches
switched off or the device may not be visible.
Some telephones offer display options.
off after several minutes of use.
► Check that the telephone has Bluetooth
Depending on the settings chosen, contacts can
When the engine is switched off, the system's
switched on.
be transferred in a specific order.
operating time depends on the state of charge of
► Check in the telephone settings that it is
► Modify the telephone directory display
the battery.
"visible to all".
settings.
The switch-off is normal: the system
The Bluetooth telephone is not compatible with
automatically goes into energy economy mode
the system.
Settings
and switches off to maintain an adequate charge
► Check the compatibility of the telephone on
When the treble and bass settings are
in the battery.
the Brand's website (services).
changed, the ambience is deselected.
► Start the vehicle’s engine to increase the
Android Auto and/or CarPlay do not work.
When the ambience is changed, the treble
charge of the battery.
and bass settings are reset.
270
Connect Nav
- Connecting to the CarPlay® or Android
With the ignition off, a press turns the system on.
Connect Nav
12
Auto applications (certain applications stop
Increase or decrease the volume using
displaying when the vehicle is moving).
the wheel or the "plus" or "minus" buttons
- Watching a video (the video stops when the
(depending on the equipment).
vehicle starts to move again).
Use the menu buttons on either side of or below
- Changing the system settings and
the touch screen for access to the menus, then
configuration.
press the virtual buttons in the touch screen.
Depending on the model, use the "Source" or
AM and DAB radio are not available on
"Menu" buttons to access the rolling menus, then
Hybrid vehicles.
press the virtual buttons in the touch screen.
Display the rolling menus at any time by pressing
the screen briefly with three fingers.
The system is protected so that it only
All of the touch areas of the screen are white.
operates in the vehicle.
GPS navigation -
Press the back arrow to go back a level.
The message Energy economy mode is
Applications - Multimedia
Press "OK" to confirm.
displayed when the system is about to go into
audio system - Bluetooth®
standby.
The touch screen is of the "capacitive"
type.
telephone
System and map updates can be
To clean the screen, use a soft, non-abrasive
The functions and settings described
downloaded from the Brand's website.
cloth (e.g. spectacles cloth) with no additional
vary according to the vehicle version and
The update procedure is also available there.
product.
configuration, as well as the country of sale.
Do not use sharp objects on the screen.
Do not touch the screen with wet hands.
The system’s Open Source Software
For safety reasons and because they
(OSS) source codes are available at the
Certain information is displayed permanently
require sustained attention by the driver,
following addresses:
in the side bars or in the upper bar of the touch
the following operations must be carried out
screen (depending on equipment):
with the vehicle stationary and the ignition
- Air conditioning status information (depending
on:
on version), and direct access to the
- Pairing the smartphone with the system via
corresponding menu.
Bluetooth.
First steps
- Go directly to the audio source selection
– Using the smartphone.
With the engine running, a press mutes
option, to view the list of radio stations (or list of
the sound.
titles depending on the source).
271
Connect Nav
- Go to the "Notifications" of messages, emails,
In very hot conditions, the volume may
Telephone (long press): reject an incoming call,
map updates and, depending on the services,
be limited to protect the system. It may
end call; when no call is in progress, access
the navigation notifications.
enter standby mode (with the screen and
telephone menu.
- Go to the settings for the touch screen and the
sound off) for 5 minutes or more.
Radio (rotate): automatic search for the
digital instrument panel.
The system will resume normal operation
previous/next station.
Audio source selection (depending on
when the temperature in the passenger
Media (rotate): previous/next track, move
equipment):
compartment has dropped.
through a list.
- FM/DAB/AM radio stations (depending on
Short press: confirm a selection; if nothing
equipment).
selected, access presets.
- Telephone connected via Bluetooth and
Steering-mounted
Radio: display the list of stations.
Bluetooth multimedia broadcast (streaming).
Media: display the list of tracks.
controls
- USB memory stick.
Radio (press and hold): update the list of
- Media player connected via the auxiliary
Voice control:
detected stations.
socket (depending on equipment).
This control is located on the steering
- Video (depending on equipment).
wheel or at the end of the lighting control stalk
Menus
(depending on equipment).
Short press, system voice control.
Connected navigation
Long press, voice commands from smartphone
or CarPlay®, Android Auto via the system.
Increase volume.
Decrease volume.
Mute by pressing the volume increase
and decrease buttons simultaneously
(depending on equipment).
Restore the sound by pressing one of the two
In the "Settings" menu, it is possible to
volume buttons.
create a profile for an individual or for a
Media (short press): change the
group of people with shared interests, and
multimedia source.
Enter navigation settings and choose a
configure a wide range of settings (radio
Telephone (short press): start telephone
destination.
presets, audio settings, navigation history,
call.
Use real-time services, depending on equipment.
favourite contacts, etc.). Settings are applied
Call in progress (short press): access
automatically.
telephone menu.
272
Connect Nav
Applications
Telephone
Vehicle
12
Run certain applications from a
Connect a telephone via Bluetooth®, read
Activate, deactivate or configure certain
smartphone connected via CarPlay® or
messages and emails and send quick
vehicle functions.
Android Auto.
messages.
Check the status of the Bluetooth® and Wi-Fi
Air conditioning
connections.
Settings
Radio Media
18,5
21,5
FM 87.5 MHz
Manage various temperature and air flow
Configure a personal profile and/or
settings.
configure the sound (balance, ambience,
Select an audio source or radio station, or
etc.) and the display (language, units, date, time,
display photographs.
etc.).
273
Connect Nav
Example of a "voice command" for the radio and
Voice commands
media:
"Play artist Madonna"
Steering wheel-mounted
Example of a "voice command" for the
controls
telephone:
Voice commands:
"Call David Miller"
Voice commands can be issued from any
The voice commands, with a choice of 17
screen page after a short press on the "Voice
languages (Arabic, Brazilian, Czech,
commands" button located on the steering
Danish, Dutch, English, Farsi, French,
wheel or at the end of the lighting control stalk
German, Italian, Norwegian, Polish,
A number of commands are available when a
(depending on equipment), as long as there is no
Portuguese, Russian, Spanish, Swedish,
menu is selected.
telephone call in progress.
Turkish), are made using the language
To ensure that voice commands are
previously chosen and set in the system.
always recognised by the system, please
For some voice commands, there are
follow these recommendations:
alternative synonyms.
- use natural language in a normal tone
Example: Guide to / Navigate to / Go to / ...
without breaking up words or raising your
The voice commands in Arabic for: "Navigate
voice.
to address" and "Display POI in the city", are
- always wait for the "beep" (audible signal)
not available.
before speaking.
- for best results, closing the windows and
Information - Using the
sunroof is recommended, to avoid extraneous
Press the Push To Talk button and tell me
interference (depending on version).
system
what you'd like after the tone. Remember
- before issuing a voice command, ask any
When voice commands are activated, by
you can interrupt me at any time by pressing this
other passengers to refrain from speaking.
briefly pressing the button, help is
button. If you press it again while I'm waiting for
displayed on the touch screen, offering various
you to speak, it'll end the conversation. If you
menus and enabling voice-based interaction with
need to start over, say "cancel". If you want to
First steps
the system.
undo something, say "undo". And to get
Example of a "voice command" for
information and tips at any time, just say "help".
navigation:
If you ask to me do something and there's some
"Navigate to address 11 regent street,
information missing that I need, I'll give you
London"
some examples or take you through it step by
274
Connect Nav
step. There's more information available in
To plan a route, say "navigate to" followed by the
distance" or "arrival time". To learn more
12
"novice" mode. You can set the dialogue mode to
address, the contact name or an intersection. For
commands, try saying "help with navigation".
"expert" when you feel comfortable.
example, "navigate to address 11 Regent Street,
Voice commands
London", "navigate to contact, John Miller",
Global voice commands
or "navigate to intersection of Regent Street,
Show POI ''hotel'' at the destination
Voice commands
London". You can specify if it's a preferred
Show nearby POI petrol station
address, or a Point of Interest. For example, say
Navigate to POI Heathrow Airport in London
Set dialogue mode as novice - expert
"navigate to preferred address, Tennis club", or
Navigate to POI petrol station along the route
Select user 1 / Select profile John
"navigate to POI Heathrow Airport in London".
Help messages
Increase temperature
Or, you can just say, "navigate home". To see
Decrease temperature
Points of Interest on a map, you can say things
To see points of interest on a map, you can
Help messages
like "show POI hotels in Banbury". For more
say things like "show hotels in Banbury", "show
information say "help with points of interest" or
nearby parking", "show hotel at the destination"
There are lots of topics I can help you with.
"help with route guidance".
or "show petrol station along the route". If you
You can say: "help with phone", "help with
To choose a destination, say something like
prefer to navigate directly to a point of interest,
navigation", "help with media" or "help with
"navigate to line three" or "select line two". If you
you can say "navigate to nearby petrol station".
radio". For an overview on how to use voice
can't find the destination but the street's right,
If you feel you are not being well understood,
controls, you can say "help with voice controls".
say for example "select the street in line three".
try to say the word "POI" in front of the point
Say "yes" if I got that right. Otherwise, say "no"
To move around a displayed list, you can say
of interest. For example say "navigate to POI
and we'll start that again.
"next page" or "previous page". You can undo
restaurant at the destination".
your last action and start over by saying "undo",
To choose a POI, say something like "select
"Navigation" voice
or say "cancel" to cancel the current action.
line 2". If you've searched for a Point of Interest
Voice commands
and don't see the one you're after, you can filter
commands
further by saying something like "select POI in
Voice commands
Tell me the remaining distance
line 2", or "select the city in line 3". You can also
Tell me the remaining time
scroll through the list by saying "next page" or
Navigate home
Tell me the arrival time
"previous page".
Navigate to work
Stop route guidance
Navigate to preferred address, Tennis club
Depending on the country, give
Help messages
Navigate to contact, John Miller
destination (address) instructions in the
Navigate to address 11 regent street, London
language configured for the system.
You can say "stop" or "resume route guidance".
Help messages
To get information about your current route, you
can say "tell me the remaining time", "remaining
275
Connect Nav
"Radio Media" voice
Voice commands
Media voice commands are available
only with a USB connection.
commands
What's playing?
Voice commands
Help messages
"Telephone" voice
Turn on source radio - Streaming Bluetooth
To choose what you'd like to play, start by saying
commands
- …
"play" and then the item. For example, say "play
Help messages
If there is no telephone connected by
song Hey Jude", "play line 3" or "select line 2".
Bluetooth, a voice message announces:
You can undo your last action and start over
You can select an audio source by saying "turn
"Please first connect a telephone", and the
by saying "undo", or say "cancel" to cancel the
on source" followed by the device name. For
voice session is closed.
current action.
example, "turn on source, Streaming Bluetooth",
Voice commands
Voice commands
or "turn on source, radio". Use the command
"play" to specify the type of music you'd like to
Play song Hey Jude
Call David Miller*
hear. You can choose between "song", "artist",
Play artist Madonna
Call voicemail*
or "album". Just say something like "play artist,
Play album Thriller
Display calls*
Madonna", "play song, Hey Jude", or "play
Help messages
Help messages
album, Thriller".
Voice commands
I'm not sure what you'd like to play. Please say
To make a phone call, say "call" followed by
"play" and then a song title, an album title, or
the contact name, for example: "Call David
Tune to channel BBC Radio 2
an artist name. For example, say "play song
Miller". You can also include the phone type, for
Tune to 98.5 FM
Hey Jude", "play artist Madonna" or "play
example: "Call David Miller at home". To make
Tune to preset number five
album Thriller". To select a line number from the
a call by number, say "dial" followed by the
Help messages
display, say "select line two". To move around
phone number, for example, "Dial 107776 835
a displayed list, you can say "next page" or
417". You can check your voicemail by saying
You can pick a radio station by saying "tune to"
"previous page". You can undo your last action
"call voicemail". To send a text, say "send quick
and the station name or frequency. For example
and start over by saying "undo", or say "cancel"
message to", followed by the contact, and then
"tune to channel Talksport" or "tune to 98.5
to cancel the current action.
the name of the quick message you'd like to
FM". To listen to a preset radio station, say for
send. For example, "send quick message to
example "tune to preset number five".
* This function is available only if the telephone connected to the system supports downloading of contacts and recent calls and the corresponding
download has been performed.
276
Connect Nav
David Miller, I'll be late". To display the list of
From the list of quick messages, say the name of
Bill Carter, I'll be late". Check the phone menu
12
calls, say "display calls". For more information on
the one you'd like to send. To move around the
for the names of the supported messages.
SMS, you can say "help with texting".
list you can say "go to start", "go to end", "next
The system only sends pre-recorded
To choose a contact, say something like "select
page" or "previous page". You can undo your last
"Quick messages".
line three". To move around the list say "next
action and start over by saying "undo", or say
page" or "previous page". You can undo your last
"cancel" to cancel the current action.
action and start over by saying "undo", or say
Voice commands
Navigation
"cancel" to cancel the current action.
Send SMS to John Miller, I'm just arriving
"Text message" voice
Send SMS to David Miller at the office, don't
Choice of a destination
wait for me
commands
Help messages
To a new destination
If there is no telephone connected by
Intuitive method:
Bluetooth, a voice message announces:
Please say "call" or "send quick message to",
Press Navigation to display the main
"Please first connect a telephone", and the
and then select a line from the list. To move
page.
voice session is closed.
around a list shown on the display, you can
Press "Search…".
say "go to start", "go to end", "next page" or
The "Text messages" voice commands
"previous page". You can undo your last action
Enter an address or the key words for the
function allows you to dictate and send
and start over by saying "undo", or say "cancel"
destination.
an SMS.
to cancel the current action.
Press "OK" to select the "Guidance
Dictate the text, taking care to pause briefly
Voice commands
criteria".
between each word.
Or
When you have finished, the voice recognition
Listen to most recent message*
Guided method:
system will automatically generate an SMS.
Help messages
In order to be able to use the navigation,
Voice commands
To hear your last message, you can say "listen to
you must enter the "City", the "Street"
(suggestions are displayed automatically
most recent message". When you want to send
Send quick message to Bill Carter, I'll be late
a text, there's a set of quick messages ready for
when you begin typing), then enter the
Help messages
you to use. Just use the quick message name
"Number" using the virtual keypad, or select
and say something like "send quick message to
* This function is available only if the telephone connected to the system supports downloading of contacts and recent calls and the corresponding
download has been performed.
277
Connect Nav
an address from the "Contact" list or the
To a recent destination
To a contact
address "History".
Press Navigation to display the main
Press Navigation to display the main
page.
page.
If you do not confirm the number, the
Press the "MENU" button to access the
Press the "MENU" button to access the
navigation system will show one end of
secondary page.
secondary page.
the street.
Select "My destinations".
Select "My destinations".
Press the "MENU" button to access the
Select the "Recent” tab.
Select the "Contact” tab.
secondary page.
Select the address chosen in the list to display
Select a contact in the list to start guided
Select "Enter address".
the "Guidance criteria”.
navigation.
Press "OK" to start guided navigation.
Then
To points of interest (POI)
Select the "Country".
Guided method:
Select "Position" to see the point of
Points of interest (POI) are listed in different
Select the keyboard “language”.
arrival on the map.
categories.
Press Navigation to display the main
Change the keyboard "type" according to
To "Home" or "My work"
page.
the selected "language": ABCDE;
Press Navigation to display the main
Press the "MENU" button to access the
AZERTY; QWERTY or QWERTZ.
page.
secondary page.
Enter the "City", the "Street" and the
Press the "MENU" button to access the
Select "Points of interest".
"Number", and confirm by pressing on
the displayed suggestions.
secondary page.
Select "My destinations".
Select the "Travel", "leisure",
Press "OK" to select the "Guidance
"Commercial", "Public" or "Geographic
criteria".
Select the "Preferred” tab.
tab.
And/or
Select "Home".
Or
Select "See on map" to choose the
Select "Search" to enter the name and
"Guidance criteria".
Or
address of a POI.
Press "OK" to start guided navigation.
Select "My work".
Press "OK" to calculate the route.
Zoom in/out using the touch buttons or
Or
Or
with two fingers on the screen.
Intuitive method:
Select a preset favourite destination.
278
Connect Nav
You can only select this method of
To a point on the map
A marker is displayed in the middle of the
12
using the service if a network connection
screen, with the "Latitude" and
Press Navigation to display the main
is active; this may be either a "network
"Longitude" coordinates.
page.
connection provided by the vehicle", if you
Choose the type of coordinates:
Explore the map by sliding a finger on the
use the Fiat Connect Box solution, or else a
DMS for: Degrees, Minutes, Seconds.
screen.
"network connection provided by the user" via
DD for: Degrees, Decimals.
Select the destination by pressing on the map.
a smartphone,
Press this button to start guided
Tap the screen to place a marker and
In both cases, the system is automatically
navigation.
display the sub-menu.
connected to the Internet, if network coverage
Or
Press this button to start guided
permits.
Press this button to save the displayed
navigation.
address.
Or
Press Navigation to display the main
OR
Press this button to save the displayed
page.
Press this button to enter the "Latitude"
address.
Press the "MENU" button to access the
value using the virtual keypad.
secondary page.
A long press on a point opens a list of
And
Select "Search".
nearby POIs.
Press this button to enter the "Longitude"
value using the virtual keypad.
Press on the mode shown in the bottom right of
the screen (On-Board or Connected) to change
To GPS coordinates
TMC (Traffic Message
the "Database".
Press Navigation to display the main
Channel)
Select the "Database" in "On-Board"
page.
mode (integrated into the map), or in
Explore the map by sliding a finger on the
Available in some countries.
"Connected" mode (connected to the Internet).
screen.
TMC (Traffic Message Channel) messages
Press the back arrow to confirm.
Touch the screen with a finger to go to the next
are based on a European standard for traffic
image.
information broadcasting via the RDS system on
Enter an address or the key words for the
Press this button to display the world
FM radio, sending traffic information in real time.
destination (POI).
map.
The TMC information is then displayed on a GPS
Press "OK" to start the search.
Using the grid, select the desired country or
Navigation system map and taken into account
region by zooming.
straight away when routes are calculated, to
Select the "On the route", "Around the
Press this button to display or enter the
avoid accidents, traffic jams and closed roads.
vehicle" or "At destination" tab to refine
GPS coordinates.
Danger zone alerts may or may not be
your search.
displayed, depending on the applicable
Select the desired address to calculate the route.
279
Connect Nav
legislation and subscription to the
update the smartphone operating system
Select the "Secured", "Not secured" or
corresponding service.
as well as the date and time on the
"Stored” tab.
smartphone and system, to ensure that the
Select a network.
communication process between the
Connected navigation
smartphone and the system functions
Using the virtual keypad, enter the "Key"
correctly.
network Wi-Fi and the "Password".
Press "OK" to establish a connection
Connected navigation
USB connection
between the smartphone and the
connection
Connect the USB cable.
vehicle’s system.
The smartphone charges when
Depending on version, vehicle trim level and
connected by the USB cable.
Usage restrictions:
subscription to online services and options.
Bluetooth connection
With CarPlay®, connection sharing is only
Activate the Bluetooth function on the
available with a Wi-Fi connection.
Network connection provided by the
telephone and ensure that it is visible to
The quality of services depends on the quality
vehicle
all (see the "Connect-App" section).
of the network connection.
With the Fiat Connect Box solution, the
Wi-Fi connection
system is automatically connected to the
Select a Wi-Fi network detected by the
Internet and connected services, and does not
Authorize sending
system and connect to it.
require the user to provide a connection via their
information
smartphone.
This function is only available if it has
Press Settings to display the main page.
OR
been activated either via the
"Notifications" or via the "Applications" menu.
Press the "OPTIONS" button to access the
Network connection provided by the
Press "Notifications".
secondary page.
user
Select "System configuration".
Select Wi-Fi to activate it.
Select the "Private mode" tab.
For the list of compatible smartphones,
OR
visit the Brand's website in your country.
Press Connect-App to display the main
OR
page.
Press "Notifications".
Activate and enter settings for sharing the
Press the "OPTIONS" button to access the
smartphone connection.
secondary page.
Press "Private mode".
Select "Wi-Fi network connection".
As processes and standards are
THEN
constantly changing, we recommend you
280

 

 

 

 

 

 

 

Content      ..     5      6      7      8     ..