|
|
|
3. Remove the gear selector override access cover (located on the right side of the gear selector housing) by prying 4. Press and maintain firm pressure on the brake pedal. 5. Insert a small screwdriver or similar tool into the access hole, and push and hold the override release lever in. 6. Move the gear selector to the NEUTRAL position. 7. The vehicle may then be started in NEUTRAL. 8. Reinstall the gear selector override access cover. FREEING A STUCK VEHICLE If your vehicle becomes stuck in mud, sand or snow, it can NOTE: Push the ⬙ESC Off⬙ switch, to place the Electronic Stability Control (ESC) system in ⬙Partial Off⬙ mode, before rocking the vehicle. Refer to “Electronic Brake Control” in ⬙ESC Off⬙ switch again to restore ⬙ESC On⬙ mode. Gear Selector Override Access Hole 7 IN CASE OF EMERGENCY 217 |