|
|
|
TEST ACTION APPLICABILITY 11 Using the schematics as a guide, inspect the wiring and connectors. Repair as All Repair Replace the Powertrain Control Module per the Service Informa- t PERFORM QUICK LEARN AND REPROGRAM PINION FACTOR. 12 The conditions necessary to set the DTC are not present at this time. t, check the EATX EVENT DATA to help identify the conditions in which the DTC was set. All Yes → Repair as necessary. Perform 41TE (NGC) TRANSMISSION VERIFICATION TEST - No → Test Complete. 243 TRANSMISSION - NGC P0845-2/4 HYDRAULIC PRESSURE TEST FAILURE — Continued |