|
|
|
TEST ACTION APPLICABILITY 3 Turn the ignition off to the lock position. All Yes → Repair the AutoStick/OD Off MUX Input circuit for a short to ground. No → Go To 4 4 Turn the ignition off to the lock position. t, erase Transmission DTCs. In AutoStick mode, perform multiple AutoStick upshifts and downshifts. t, read Transmission DTCs. Does the DTC return? All Yes → Go To 5 No → Test Complete. Perform 41TE TRANSMISSION VERIFICATION TEST - VER 1. 5 Using the schematics as a guide, inspect the wiring and connectors. Repair as All Repair Replace the Transmission Control Module per the Service Infor- t PERFORM QUICK LEARN AND REPROGRAM PINION FACTOR. 6 The conditions necessary to set the DTC are not present at this time. t, check the EATX EVENT DATA to help identify the conditions in which the DTC was set. All Yes → Repair as necessary. Perform 41TE TRANSMISSION VERIFICATION TEST - VER 1. No → Test Complete. 123 TRANSMISSION - EATX P0952-AUTOSTICK INPUT CIRCUIT LOW — Continued |