|
|
|
TEST ACTION APPLICABILITY 9 Turn the ignition off to the lock position. t, actuate the Transmission Control Relay. Using a 12-volt test light connected to ground, check the Transmission Control Relay All Yes → Replace the Transmission Control Relay. Perform 41TE TRANSMISSION VERIFICATION TEST - VER 1. No → Go To 10 10 Using the schematics as a guide, inspect the wiring and connectors. Repair as All Repair Replace the Transmission Control Module per the Service Infor- t PERFORM QUICK LEARN AND REPROGRAM PINION FACTOR. 11 The conditions necessary to set this DTC are not present at this time. t, check the EATX EVENT DATA to help identify the conditions in which the DTC was set. All Yes → Repair as necessary. Perform 41TE TRANSMISSION VERIFICATION TEST - VER 1. No → Test Complete. 111 TRANSMISSION - EATX P0888-RELAY OUTPUT ALWAYS OFF — Continued |