|
|
|
Symptom: RIGHT MIRROR HORIZONTAL SENSOR OUT OF RANGE HIGH When Monitored and Set Condition: RIGHT MIRROR HORIZONTAL SENSOR OUT OF RANGE HIGH When Monitored: Continuously when the PCI bus is active. Set Condition: This code is set when the mirror sensor feedback to the Memory Seat Mirror Module is greater than the mirror out of range high value stored in EEPROM. Code POSSIBLE CAUSES RIGHT MIRROR HORIZONTAL POSITION WIRE SHORTED TO VOLTAGE RIGHT MIRROR SENSOR GROUND WIRE OPEN STORED DIAGNOSTIC TROUBLE CODE RIGHT MIRROR HORIZONTAL POSITION SIGNAL OPEN RIGHT POWER MIRROR MEMORY SEAT MIRROR MODULE HORIZONTAL POSITION SIGNAL MEMORY SEAT MIRROR MODULE SENSOR GROUND TEST ACTION APPLICABILITY 1 With the DRBIII t, erase the DTC from Memory Seat Mirror Module. Operate the driver’s power seat and memory system. All Yes → Go To 2 No → Using the wiring diagram/schematic as a guide, inspect the wiring and connectors for an intermittent condition. 2 Turn the ignition off. All Yes → Go To 3 No → Go To 6 727 MEMORY SEAT |