|
|
|
Symptom: FUEL LEVEL SENDING UNIT INPUT OPEN When Monitored and Set Condition: FUEL LEVEL SENDING UNIT INPUT OPEN When Monitored: With the ignition on. Set Condition: Fuel Level Input to the BCM is greater than 9.8 volts for greater than 62.5 milliseconds. POSSIBLE CAUSES INTERMITTENT CONDITION FUEL LEVEL SENSOR SIGNAL SHORTED TO B+ GROUND CIRCUIT OPEN FUEL LEVEL SENDING UNIT FUEL LEVEL SENSOR SIGNAL CIRCUIT OPEN BCM TEST ACTION APPLICABILITY 1 Turn the ignition on. t, erase DTCs. Cycle the ignition off and on, leaving ignition key on for at least 15 seconds. t in Body Computer, read DTCs. Does the DTC reset? All Yes → Go To 2 No → Go To 7 2 Turn the ignition off. All Yes → Repair the Fuel Level Sensor Signal circuit shorted to battery voltage. No → Go To 3 627 INSTRUMENT CLUSTER |