|
|
|
Symptom: FRONT MODE DOOR TRAVEL TOO SMALL (ACTIVE) When Monitored and Set Condition: FRONT MODE DOOR TRAVEL TOO SMALL (ACTIVE) When Monitored: With the ignition on and the IOD fuse installed. Set Condition: This DTC is set when the ATC monitors the travel range during system initialization and the measured range is less than expected. POSSIBLE CAUSES CHECK THE ATC FOR DTCS ATC OBSTRUCTED MODE DOOR MODE DOOR ACTUATOR TEST ACTION APPLICABILITY 1 Turn the ignition on. All Yes → Return to the symptom list and choose the symptom. With the DRBIII t, reset the ATC after repair is complete. Perform BODY VERIFICATION TEST - VER 1. No → Go To 2 2 Turn the ignition off. All Yes → Go To 3 No → Replace the ATC. With the DRBIII t, reset the ATC after repair is complete. Perform BODY VERIFICATION TEST - VER 1. 3 Remove the Mode Door Actuator. Rotate the mode doors (doors only). Note: These All Yes → Replace the Mode Door Actuator. With the DRBIII t, reset the ATC after repair is complete. Perform BODY VERIFICATION TEST - VER 1. No → Repair or replace the mode door as necessary. With the DRBIII t, reset the ATC after repair is complete. Perform BODY VERIFICATION TEST - VER 1. 231 AUTOMATIC TEMPERATURE CONTROL |