STORED ENERGY FIRING 1
When Monitored:
With the ignition on, the module on board diagnostics continuously
performs internal circuit tests.
Set Condition:
This DTC will set if the module identifies an out of range internal circuit.
POSSIBLE CAUSES
AIRBAG CONTROL MODULE - ACM
SIDE IMPACT AIRBAG CONTROL MODULE
TEST
ACTION
APPLICABILITY
1
Turn the ignition on.
NOTE: Ensure the battery is fully charged.
NOTE: For the purpose of this test, the AECM and ORC modules will be
referred to as an ACM.
WARNING: IF THE MODULE IS DROPPED AT ANY TIME, IT MUST BE
REPLACED.
Select the appropriate module and DTC type combination:
All
ACM - ACTIVE DTC
WARNING: TURN THE IGNITION OFF, DISCONNECT THE
BATTERY AND WAIT TWO MINUTES BEFORE PROCEEDING.
Replace the Airbag Control Module in accordance with Service
Manuals.
Perform AIRBAG VERIFICATION TEST - VER 1.
ACM - STORED DTC
WARNING: TURN THE IGNITION OFF, DISCONNECT THE
BATTERY AND WAIT TWO MINUTES BEFORE PROCEEDING.
Replace the Airbag Control Module in accordance with Service
Manuals.
Perform AIRBAG VERIFICATION TEST - VER 1.
SIACM - ACTIVE DTC
WARNING: TURN THE IGNITION OFF, DISCONNECT THE
BATTERY AND WAIT TWO MINUTES BEFORE PROCEEDING.
Replace the Side Impact Airbag Control Module in accordance
with Service Manuals.
Perform AIRBAG VERIFICATION TEST - VER 1.
SIACM - STORED DTC
WARNING: TURN THE IGNITION OFF, DISCONNECT THE
BATTERY AND WAIT TWO MINUTES BEFORE PROCEEDING.
Replace the Side Impact Airbag Control Module in accordance
with Service Manuals.
Perform AIRBAG VERIFICATION TEST - VER 1.
NOTE: When reconnecting Airbag system components, the ignition must be
turned off and the battery must be disconnected.
43
AIRBAG
ACCELEROMETER 1 —
Continued