|
|
|
TEST ACTION APPLICABILITY 2 Turn the ignition on. t, select Engine system from the main menu. Display and record the Vehicle Identification Number. All Yes → Go To 3 No → Replace and program the Powertrain Control Module in accor- dance with the Service Information. 3 Turn the ignition off. t, display and clear all PCM and SKIM DTC’s. Perform 5 ignition key cycles leaving the ignition key on for 90 seconds per cycle. t, check for SKIM DTCs. Does the DRBIII t display the same DTC? All Yes → Replace and program the Powertrain Control Module in accor- dance with the Service Information. No → The repair is complete. Perform SKIS VERIFICATION. 4 Turn the ignition off. All Yes → Repair wiring harness/connectors as necessary. Perform SKIS VERIFICATION. No → Test Complete. 475 SENTRY KEY IMMOBILIZER ROLLING CODE FAILURE — Continued |