Daewoo Korando. Service manual - part 348

9P-2  DOORS

SCHEMATIC AND ROUTING DIAGRAMS

POWER WINDOW

DOORS  9P-3

MAINTENANCE AND REPAIR

ON-VEHICLE SERVICE

FRONT DOOR

1 Door Trim Panel Assembly
2 Center Upper Panel
3 Inside Handle Mounting Plate
4 Door Pull Handle
5 Door Defroster Nozzle
6 Door Defroster Duct
7 Door Trim Panel
8 Door Pocket
9 Belt Inside Strap

10 Door Trim Mounting Fastener

11 Door Courtesy Lamp

12 Screw
13 Door Pull Handle Mounting Support Bracket
14 Door Trim Complete Mounting Clip
15 Door Inside handle Mounting Gromet
16 Door Defroster Gromet
17 Door Defroster Gromet Vessel
18 Door Pocket Mounting Screw
19 Door Trim Pad

9P-4  DOORS

Adjustment Procedure

1. Install door striker to side outer panel and tighten the screw

slightly.

2. Unlock the door and check the clearance between door

and side outer panel.

3. If necessary, insert the seam.

4. Adjust latch lever to the center of striker and tighten the

screw.

Clearance

3.5 - 5.5 Nm

Tightening  Torque

10 - 19 Nm

DOORS  9P-5

TAIL GATE

1 Upper Bracket
2 Lower Bracket
3 Bolt

4 Tail Gate
5 Stopper