|
|
Content .. 2912 2913 2914 2915 ..
Circuit/System Description The neutral indicator circuit consists of an ignition 1 voltage circuit and a neutral indicator Conditions for Running the DTC The ignition is ON. System voltage is 10-18 volts. Conditions for Setting the DTC The system monitors the voltage on the neutral indicator control circuit. If the system detects a voltage of 2 volts or less for 1.5 seconds when the 2 high indicator is If the system detects a voltage of 4.5 volts or more when the 2 high indicator is commanded, Action Taken When the DTC Sets The SERVICE 4WD indicator is commanded on for this DTC for the remainder of the ignition Conditions for Clearing the DTC The transfer case shift control module clears the DTC if the condition for setting the DTC is A history DTC clears after 40 consecutive warm up cycles without a fault present. History DTCs can be cleared using a scan tool. Reference Information Schematic Reference Transfer Case Control Schematics Connector End View Reference 06 06 01
2008 Chevrolet Silverado 1500 2008 TRANSMISSION Transfer Case - MP 3023/3024-NQH - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
|