|
|
Content .. 1614 1615 1616 1617 ..
Fig. 15: Identifying Valve On Vacuum Gage Assembly 15. Slowly open the valve on the vacuum gage assembly. When the coolant reaches the top of the fill hose, close the valve. This will eliminate air from the fill hose. 16. Close the valve on the venture assembly. 17. If there is a suspected leak in the cooling system, allow the system to stabilize under vacuum and monitor for vacuum loss. If vacuum loss is observed, refer to Loss of Coolant. 18. Open the valve on the vacuum gage assembly. The vacuum gage will drop as coolant is drawn into the system.
2008 Chevrolet Silverado 1500 2008 ENGINE Engine Cooling - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
|