Dodge Chassis Cab (2012 year). Instruction

Mexico City in Mexico). Please refer to the 24-Hour
“Towing Assistance” coverage details on the DVD in
the Warranty Information Booklet and the 24-Hour
Towing Assistance references.

• If supported, this number may be programmable on

some systems. To do this, press the

button and say

“Setup”, followed by “Towing Assistance”.

Paging
To learn how to page, refer to “Working with Automated
Systems”. Paging works properly except for pagers of
certain companies, which time out a little too soon to
work properly with the Uconnect™ Phone.

Voice Mail Calling
To learn how to access your voice mail, refer to “Working
with Automated Systems”.

Working With Automated Systems
This method is used in instances where one generally has
to press numbers on the mobile phone keypad while
navigating through an automated telephone system.

You can use your Uconnect™ Phone to access a voice
mail system or an automated service, such as a paging
service or automated customer service line. Some ser-
vices require immediate response selection. In some
instances, that may be too quick for use of the
Uconnect™ Phone.

When calling a number with your Uconnect™ Phone that
normally requires you to enter in a touch-tone sequence
on your mobile phone keypad, you can press the
button and say the sequence you wish to enter, followed
by the word “Send”. For example, if required to enter
your PIN followed with a pound, (3 7 4 6 #), you can
press the

button and say, “3 7 4 6 # Send”. Saying

a number, or sequence of numbers, followed by “Send”,

108

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

is also to be used for navigating through an automated
customer service center menu structure, and to leave a
number on a pager.

You can also send stored Uconnect™ phonebook entries
as tones for fast and easy access to voice mail and pager
entries. To use this feature, dial the number you wish to
call and then press the

button and say, “Send.” The

system will prompt you to enter the name or number and
say the name of the phonebook entry you wish to send.
The Uconnect™ Phone will then send the corresponding
phone number associated with the phonebook entry, as
tones over the phone.

NOTE:

• You may not hear all of the tones due to mobile phone

network configurations. This is normal.

• Some paging and voice mail systems have system time

out settings that are too short and may not allow the
use of this feature.

Barge In — Overriding Prompts
The “Voice Command” button can be used when you
wish to skip part of a prompt and issue your voice
command immediately. For example, if a prompt is
asking “Would you like to pair a phone, clear a...,” you
could press the

button and say, “Pair a Phone” to

select that option without having to listen to the rest of
the voice prompt.

Turning Confirmation Prompts ON/OFF
Turning confirmation prompts off will stop the system
from confirming your choices (e.g., the Uconnect™
Phone will not repeat a phone number before you dial it).

• Press the

button to begin.

• After the “Ready” prompt and the following beep, say

one of the following:

− “Setup Confirmation Prompts On”

− “Setup Confirmation Prompts Off”

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

109

Phone And Network Status Indicators
If available on the radio and/or on a premium display
such as the instrument panel cluster, and supported by
your mobile phone, the Uconnect™ Phone will provide
notification to inform you of your phone and network
status when you are attempting to make a phone call
using Uconnect™ Phone. The status is given for network
signal strength, phone battery strength, etc.

Dialing Using The Mobile Phone Keypad
You can dial a phone number with your mobile phone
keypad and still use the Uconnect™ Phone (while dialing
via the mobile phone keypad, the user must exercise
caution and take precautionary safety measures). By
dialing a number with your paired Bluetooth

威 mobile

phone, the audio will be played through your vehicle’s
audio system. The Uconnect™ Phone will work the same
as if you dial the number using Voice Command.

NOTE:

Certain brands of mobile phones do not send the

dial ring to the Uconnect™ Phone to play it on the vehicle
audio system, so you will not hear it. Under this situa-
tion, after successfully dialing a number the user may feel
that the call did not go through even though the call is in
progress. Once your call is answered, you will hear the
audio.

Mute/Un-Mute (Mute OFF)
When you mute the Uconnect™ Phone, you will still be
able to hear the conversation coming from the other
party, but the other party will not be able to hear you. In
order to mute the Uconnect™ Phone:

• Press the

button.

• Following the beep, say “Mute”.

In order to un-mute the Uconnect™ Phone:
• Press the

button.

• Following the beep, say “Mute off”.

110

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Advanced Phone Connectivity

Transfer Call To And From Mobile Phone
The Uconnect™ Phone allows ongoing calls to be trans-
ferred from your mobile phone to the Uconnect™ Phone
without terminating the call. To transfer an ongoing call
from your Uconnect™ Phone paired mobile phone to the
Uconnect™ Phone or vice versa, press the

button

and say “Transfer Call”.

Connect Or Disconnect Link Between The
Uconnect™ Phone And Mobile Phone
Your mobile phone can be paired with many different
electronic devices, but can only be actively “connected”
with one electronic device at a time.

If you would like to connect or disconnect the Bluetooth

威

connection between your mobile phone and the
Uconnect™ Phone System, follow the instructions de-
scribed in your mobile phone User’s Instruction.

List Paired Mobile Phone Names

• Press the

button to begin.

• After the “Ready” prompt and the following beep, say

“Setup Phone Pairing”.

• When prompted, say “List Phones”.
• The Uconnect™ Phone will play the phone names of

all paired mobile phones in order from the highest to
the lowest priority. To “Select” or “Delete” a paired
phone being announced, press the

button and

say “Select” or “Delete”. Also, see the next two sec-
tions for an alternate way to “Select” or “Delete” a
paired phone.

Select Another Mobile Phone
This feature allows you to select and start using another
phone paired with the Uconnect™ Phone.

• Press the

button to begin.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

111

• After the “Ready” prompt and the following beep, say

“Setup Select Phone” and follow the prompts.

• You can also press the

button at any time while the

list is being played, and then choose the phone that
you wish to select.

• The selected phone will be used for the next phone

call. If the selected phone is not available, the
Uconnect™ Phone will return to using the highest
priority phone present in or near (approximately
within 30 ft (9 m)) the vehicle.

Delete Uconnect™ Phone Paired Mobile Phones

• Press the

button to begin.

• After the “Ready” prompt and the following beep, say

“Setup Phone Pairing”.

• At the next prompt, say “Delete” and follow the

prompts.

• You can also press the

button at any time while the

list is being played, and then choose the phone you
wish to delete.

Things You Should Know About Your Uconnect™
Phone

Uconnect™ Phone Tutorial
To hear a brief tutorial of the system features, press the

button and say “Uconnect™ Tutorial.”

Voice Training
For users experiencing difficulty with the system recogniz-
ing their voice commands or numbers, the Uconnect™
Phone Voice Training feature may be used. To enter this
training mode, follow one of the two following procedures:

From outside the Uconnect™ Phone mode (e.g., from
radio mode):

• Press and hold the

button for five seconds until

the session begins, or,

112

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

• Press the

button and say the “Voice Training,

System Training, or Start Voice Training” command.

You can either press the Uconnect™ Phone button to
restore the factory setting or repeat the words and
phrases when prompted by the Uconnect™ Phone. For
best results, the Voice Training session should be com-
pleted when the vehicle is parked with the engine
running, all windows closed, and the blower fan
switched off.

This procedure may be repeated with a new user. The
system will adapt to the last trained voice only.

Reset

• press the

button.

• After the “Ready” prompt, and the following beep, say

“Setup”, then “Reset”.

This will delete all phone pairing, phone book entries,
and other settings in all language modes. The System will
prompt you before resetting to factory settings.

Voice Command

• For best performance, adjust the rearview mirror to

provide at least

⁄

in (1 cm) gap between the overhead

console (if equipped) and the mirror.

• Always wait for the beep before speaking.
• Speak normally, without pausing, just as you would

speak to a person sitting a few feet/meters away from
you.

• Make sure that no one other than you is speaking

during a Voice Command period.

• Performance is maximized under:

• low-to-medium blower setting,

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

113

• low-to-medium vehicle speed,
• low road noise,
• smooth road surface,
• fully closed windows,
• dry weather condition.

• Even though the system is designed for users speaking

in North American English, French, and Spanish ac-
cents, the system may not always work for some.

• When navigating through an automated system such

as voice mail, or when sending a page, at the end of
speaking the digit string, make sure to say “Send”.

• Storing names in the phonebook when the vehicle is

not in motion is recommended.

• It is not recommended to store similar sounding

names in the Uconnect™ Phonebook.

• Phonebook (Downloaded and Uconnect™ Phone Lo-

cal) name recognition rate is optimized when the
entries are not similar.

• Numbers must be spoken in single digits. “800” must

be spoken “eight-zero-zero” not “eight hundred”.

• You can say “O” (letter “O”) for “0” (zero).
• Even though international dialing for most number

combinations is supported, some shortcut dialing
number combinations may not be supported.

• In a convertible vehicle, system performance may be

compromised with the convertible top down.

Far End Audio Performance

• Audio quality is maximized under:

• low-to-medium blower setting,
• low-to-medium vehicle speed,

114

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

• low road noise,
• smooth road surface,
• fully closed windows,
• dry weather conditions, and
• operation from the driver’s seat.

• Performance, such as audio clarity, echo, and loudness

to a large degree rely on the phone and network, and
not the Uconnect™ Phone.

• Echo at the phone far end can sometimes be reduced

by lowering the in-vehicle audio volume.

• In a convertible vehicle, system performance may be

compromised with the convertible top down.

Recent Calls
If your phone supports “Automatic Phonebook Down-
load”, Uconnect™ Phone can list your Outgoing, Incom-
ing and Missed Calls.

SMS
Uconnect™ Phone can read or send new messages on
your phone.

Read Messages:
If you receive a new text message while your phone is
connected to Uconnect™ Phone, an announcement will
be made to notify you that you have a new text message.
If you wish to hear the new message:

• Press the

button.

• After the “Ready” prompt and the following beep, say

“SMS Read” or “Read Messages.”

• Uconnect™ Phone will play the new text message for

you.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

115

After reading a message, you can “Reply” or “Forward”
the message using Uconnect™ Phone.

Send Messages:
You can send messages using Uconnect™ Phone. To send
a new message:

• Press the

button.

• After the “Ready” prompt and the following beep, say

“SMS Send” or “Send Message.”

• You can either say the message you wish to send or say

“List Messages.” There are 20 preset messages.

To send a message, press the

button while the

system is listing the message and say “Send.”

Uconnect™ Phone will prompt you to say the name or
number of the person you wish to send the message to.

List of Preset Messages:

1. Yes

2. No

3. Where are you?

4. I need more direction.

5. L O L

6. Why

7. I love you

8. Call me

9. Call me later

10. Thanks

11. See You in 15 minutes

12. I am on my way

116

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

13. I’ll be late

14. Are you there yet?

15. Where are we meeting?

16. Can this wait?

17. Bye for now

18. When can we meet

19. Send number to call

20. Start without me

Turn SMS Incoming Announcement ON/OFF
Turning the SMS Incoming Announcement OFF will stop
the system from announcing the new incoming mes-
sages.

• Press the

button.

• After the “Ready” prompt and the following beep, say

“Setup, SMS Incoming Message Announcement,” you
will then be given a choice to change it.

Bluetooth

威 Communication Link

Mobile phones have been found to lose connection to the
Uconnect™ Phone. When this happens, the connection
can generally be reestablished by switching the phone
off/on. Your mobile phone is recommended to remain in
Bluetooth

威 ON mode.

Power-Up
After switching the ignition key from OFF to either the
ON or ACC position, or after a language change, you
must wait at least fifteen seconds prior to using the
system.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

117

Voice Commands

Primary

Alternate(s)

zero
one
two
three
four
five
six
seven
eight
nine
star (*)
plus (+)
pound (#)
add location
all

Voice Commands

Primary

Alternate(s)

call
cancel
confirmation prompts
continue
delete
dial
download
edit
emergency
English
erase all
Espanol
Francais
help
home

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

121

Voice Commands

Primary

Alternate(s)

language
list names
list phones
mobile
mute
mute off
new entry
no
other
pair a phone
phone pairing

pairing

phonebook

phone book

previous
record again
redial

Voice Commands

Primary

Alternate(s)

return to main menu

return or main menu

select phone

select

send
set up

phone settings or phone
set up

towing assistance
transfer call
Uconnect™ Tutorial
try again
voice training
work
yes

122

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

General Information

This device complies with Part 15 of the FCC rules and
RSS 210 of Industry Canada. Operation is subject to the
following conditions:

• Changes or modifications not expressly approved by

the party responsible for compliance could void the
user’s authority to operate the equipment.

• This device may not cause harmful interference.
• This device must accept any interference received,

including interference that may cause undesired
operation.

VOICE COMMAND — IF EQUIPPED

Voice Command System Operation

This Voice Command system allows you to
control your AM, FM radio, satellite radio, disc
player, and a memo recorder.

NOTE:

Take care to speak into the Voice Interface

System as calmly and normally as possible. The ability of
the Voice Interface System to recognize user voice com-
mands may be negatively affected by rapid speaking or a
raised voice level.

WARNING!

Any voice commanded system should be used only
in safe driving conditions following local laws. All
attention should be kept on the roadway ahead.
Failure to do so may result in a collision causing
serious injury or death.

When you press the Voice Command

button, you

will hear a beep. The beep is your signal to give a
command.

NOTE:

If you do not say a command within a few

seconds, the system will present you with a list of options.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

123

Dodge Chassis Cab (2012 year). Instruction - part 7