Audi A4. Body repair manual - part 50
Instrument cluster, On Board Diagnostic (OBD) (through M.Y. 1999)
Adapting multi-function display language
versions
Note:
Adaptation is only carried out on vehicles
equipped with on board computer.
Rapid data transfer
HELP
Indicated on display
Select function XX
- Press buttons -1- and -0- to select "Adaptation" function 10 and press -
Q- button to confirm input.
Adaptation
Q
Indicated on display
Insert channel number XX
- Press buttons -0- and -4-.
- Press -Q- button to confirm input
Channel 4 Adaptation 1
Indicated on display
-1 3-
Notes:
The display shows only the last digit of the five-digit language code,
e.g. 1 for German.
Input of incorrect values will end the adaptation function. "Adaptation"
function 10 must be selected again.
When using the VAG1551 keypad, only the direct input method can be
used.
Instrument cluster, On Board Diagnostic (OBD) (through M.Y. 1999)
Language version coding table
Code
Language
00001
German
00002
English
00003
French
00004
Italian
00005
Spanish
00006
Portuguese
Step-by-step method:
- Press button -1- to move downward and button -
3- to move upward through codes. Example: 2
for English.
Channel 4 Adaptation 2
Q
Indicated on display
-1 3-
- Press -Q- button to confirm input.
Channel 4 Adaptation 2
Q
Indicated on display
Store changed value?
- Press -Q- button to confirm input.
Channel 4 Adaptation 2
Indicated on display
Changed value is stored
- Press button to end language version adaptation.
Instrument cluster, On Board Diagnostic (OBD) (through M.Y. 1999)
Direct input method:
Channel 4 Adaptation 1
Indicated on display
-1 3-
- Press button.
Channel 4 Adaptation 1
Q
Indicated on display
Input adaptation value XXXXX
Code: 2 (English)
Input value: 00002
- Press -Q- button to confirm input.
Channel 4 Adaptation 1
Q
Indicated on display
Input adaptation value 00002
- Press -Q- button to confirm input.
Channel 4 Adaptation 2
Q
Indicated on display
-1 3-
- Press -Q- button to confirm input.
Channel 4 Adaptation 2
Q
Indicated on display
Store changed value?
- Press -Q- button to confirm input.
Indicated on display
Instrument cluster, On Board Diagnostic (OBD) (through M.Y. 1999)
- Press button to end language version adaptation.
Changed value is stored
Instrument cluster, On Board Diagnostic (OBD) (through M.Y. 1999)
Resetting SRI after servicing
Rapid data transfer
HELP
Indicated on display
Select function XX
- Press buttons -1- and -0- to select "Adaptation" function 10 and press -
Q- button to confirm input.
Adaptation
Q
Indicated on display
Insert channel number XX
- Press buttons -0- and -2- to insert channel 02.
- Press -Q- button to confirm input.
Notes:
It is possible to reset the SRI without using the VAG1551/1552
data version D05 and newer.
Instrument cluster, On Board Diagnostic (OBD) (through M.Y. 1999)
Channel 2 Adaptation 1
Indicated on display. (service interval will be displayed, e.g. 1)
-1 3-
1 - indicates that the oil service is due.
10 - indicates that the inspection service is due.
11 - indicates that oil and inspection services are due.
Note:
Reset the SRI using only the direct input method.
- Press button.
Channel 2 Adaptation 1
Indicated on display
Input adaptation value XXXXX
Delete the following service events by using the adaptation values listed
below:
Adaptation value
Service Event
00000
Delete OIL and INSP
00010
Delete OIL
00001
Delete INSP
- Using keypad, enter appropriate adaptation value to delete service
event, e.g. 00000.
- Press -0- button five times.
Instrument cluster, On Board Diagnostic (OBD) (through M.Y. 1999)
Channel 2 Adaptation 1
Q
Indicated on display
Input adaptation value 00000
- Press -Q- button to confirm input.
Channel 2 Adaptation 0
Q
Indicated on display
- 1 3-
- Press -Q- button to confirm input.
Channel 2 Adaptation 0
Q
Indicated on display
Store changed value?
- Press -Q- button to confirm input.
Channel 2 Adaptation 0
Indicated on display
Changed value is stored
- Press button to end SRI reset.
Instrument cluster, On Board Diagnostic (OBD) (through M.Y. 1999)
Adapting SRI for oil change service interval
(distance in km)
This function is used to enter the distance (in km)
until the next oil change service is due (see
service schedule "Maintenance Service").
Rapid data transfer
HELP
Indicated on display
Select function XX
- Press buttons -1- and -0- to select "Adaptation" function 10 and press -
Q- button to confirm input.
Adaptation
Q
Indicated on display
Insert channel number XX
- Press buttons -0- and -5- to insert channel 05.
- Press -Q- button to confirm input.
Instrument cluster, On Board Diagnostic (OBD) (through M.Y. 1999)
Channel 5 Adaptation 1
Indicated on display
- 1 3-
The display shows the number of kilometers remaining until the next oil
change service is due (the "1" indicates 1000 km remaining).
Notes:
Values can only be entered in increments of 1000 km. Therefore, the
distance indicated is in units of 1000.
In countries where speedometers are calibrated in miles, adjustments
must still be made in kilometers. Therefore convert miles to kilometers
(miles x 1.609 = kilometers) to get the required adaptation value.
When using the scan tool keypad, only the direct input method can be
used.
If an incorrect value is input, the "adaptation" function 10 will be
cancelled and must be initiated again.
- Press button.
Instrument cluster, On Board Diagnostic (OBD) (through M.Y. 1999)
Channel 5 Adaptation 1
Indicated on display
Input adaptation value XXXXX
- Input desired interval value using keypad on VAG1551, fill in leading
digits with zeroes "0."
Example:
Specification: 15000 km
Input value: 00015
Channel 5 Adaptation 1
Q
Indicated on display
Input adaptation value 00015
- Press -Q- button to confirm input.
Channel 5 Adaptation 15
Q
Indicated on display
- 1 3-
- Press -Q- button to confirm input.
Channel 5 Adaptation 15
Q
Indicated on display
Store changed value?
- Press -Q- button to confirm input.
Channel 5 Adaptation 15
Indicated on display
Changed value is stored
- Press button to end SRI adaptation.
Instrument cluster, On Board Diagnostic (OBD) (through M.Y. 1999)
Adapting SRI for inspection service Interval-1
(IN1) (distance in km)
This function is used to enter the distance
remaining (distance in km) until the next
maintenance service is due (see service
schedule "Maintenance Service").
Rapid data transfer
HELP
Indicated on display
Select function XX
- Press buttons -1- and -0- to select "Adaptation" function 10 and press -
Q- button to confirm input.
Adaptation
Q
Indicated on display
Insert channel number XX
- Press buttons -0- and -6- to insert channel 06.
- Press -Q- button to confirm input.
Instrument cluster, On Board Diagnostic (OBD) (through M.Y. 1999)
Channel 6 Adaptation 5
Indicated on display
-1 3-
The display shows the number of kilometers remaining until the next
maintenance service is due (the "5" indicates 5000 km remaining).
Notes:
Values can only be entered in increments of 1000 km. Therefore, the
distance indicated is in units of 1000.
In countries where speedometers are calibrated in miles, adjustments
must still be made in kilometers. Therefore convert miles to kilometers
(miles x 1.609 = kilometers) to get the required adaptation value.
When using the scan tool keypad, only the direct input method can be
used.
If an incorrect value is input, the "adaptation" function 10 will be
cancelled and must be initiated again.
- Press button.
Instrument cluster, On Board Diagnostic (OBD) (through M.Y. 1999)
Channel 6 Adaptation 11
Indicated on display
Input adaptation value XXXXX
- Input desired interval value using keypad on VAG1551, fill in leading
digits with zeroes "0."
Example:
Specification: 30000 km
Input value: 00030
Channel 6 Adaptation 11
Q
Indicated on display
Input adaptation value 00030
- Press -Q- button to confirm input.
Channel 6 Adaptation 30
Q
Indicated on display
-1 3-
- Press -Q- button to confirm input.
Channel 6 Adaptation 30
Q
Indicated on display
Store changed value?
- Press -Q- button to confirm input.
Channel 6 Adaptation 30
Indicated on display
Changed value is stored
- Press button to end SRI adaptation.
Rapid data transfer
HELP
Indicated on display
Select function XX