|
|
|
Brake System In order to assure brake system performance, all brake system components should be inspected periodically. Refer to the “Maintenance Plan” in this section for the proper maintenance intervals. WARNING! Riding the brakes can lead to brake failure and possi- Fluid Level Check — Brake Master Cylinder The fluid level of the master cylinder should be checked when performing under the hood service or immediately if the brake system warning lamp indicates system failure. voir. On the outboard side of the reservoir, there is a “MAX” mark and a “MIN” mark. The fluid level must be kept within these two marks. Do not add fluid above the MAX mark because leakage may occur at the cap. With disc brakes the fluid level can be expected to fall as the brake linings wear. However, an unexpected drop in fluid level may be caused by a leak and a system check should be conducted. tions” for further information. WARNING! • Use only manufacturer’s recommended brake fluid. Refer to “Fluids And Lubricants” in “Technical • To avoid contamination from foreign matter or mois- ture, use only new brake fluid or fluid that has been (Continued) 8 SERVICING AND MAINTENANCE 519 |