|
|
|
WARNING! Raising the vehicle higher than necessary can make the 5. Remove the lug nuts and pull the wheel off. Install the spare wheel and lug nuts with the cone shaped end of the lug nuts toward the wheel. Hand tighten the lug nuts with vehicle lifted. To avoid the risk of forcing the vehicle off the jack, do not fully tighten the lug nuts until the vehicle has been lowered. 6. Lower vehicle to ground, finish tightening the lug nuts. Push down on the wrench while at the end of the handle for increased leverage. Tighten the lug nuts in a star pattern until each nut has been tightened twice. NOTE: For the correct lug nut torque refer to “Torque Specifications” in “Technical Specifications.”If in doubt WARNING! A loose tire or jack thrown forward in a collision or 7. Install the wheel center cap and remove the wheel blocks. Do not install chrome or aluminum wheel center caps on the spare wheel. This may result in cap damage. 8. Lower the jack to its fully closed position. Stow the replaced tire, jack, and tools as previously described. 9. Adjust the tire pressure when possible. To Stow The Flat Or Spare WARNING! A loose tire or jack thrown forward in a collision or 470 IN CASE OF EMERGENCY |