|
|
|
Fluid Level Check — Vehicles with 2.4L and 2.7L 1. Park the vehicle on level ground. 2. Run the engine at curb idle speed for a minimum of 3. Apply the parking brake fully. 4. Place the gear selector momentarily in each gear 5. Wipe the area around the dipstick clean to eliminate 6. Remove the dipstick and determine if the fluid is hot driven at least 15 miles (24 km). Hot fluid cannot be held 7. Wipe the dipstick clean and reinsert until seated. Then, a. If the fluid is hot, the reading should be in the b. If the fluid is cold, the fluid level should be between If the fluid level is low, add sufficient fluid through the 396 MAINTAINING YOUR VEHICLE |