Content .. 35 36 37 38 ..

KIA Carens (2018 year). Manual - part 37

Engine compartment fuse panel (diesel engine only)

8-85

Maintünancü

Symbol

Fusü ratinþ RELAð Namü

Rülay Typü

FUEL HEATER RLð

çTC_HTR_1 RLð

çTC_HTR_2 RLð

çTC_HTR_3 RLð

GLæW

çTC_HTR_1

çTC_HTR_2

çTC_HTR_3

Maintünancü

8-86

LIGHT BULBS

WARNING

n Working on the lights

Prior to working on the light, firmly

apply the parking brake, ensure that

the ignition switch is turned to the

LOCK position (smart key: turn off

the engine) and turn off the lights to

avoid sudden movement of the vehi‐

cle and burning your fingers or get‐

ting an electric shock.

Usü only thü bulbs oý thü spüciýiüd wat‐

taþü.

CAUTION

Be sure to replace the burned-out

bulb with one of the same wattage

rating. Otherwise, it may cause

damage to the fuse or electric wiring

system.

CAUTION

If you don’t have necessary tools,

the correct bulbs and the expertise,

consult a professional workshop. Kia

recommends to consult an author‐

ized Kia dealer/service partner. In

many cases, it is difficult to replace

vehicle light bulbs because other

parts of the vehicle must be re‐

moved before you can get to the

bulb. This is especially true if you

have to remove the headlight as‐

sembly to get to the bulb(s).

Removing/installing the headlight

assembly can result in damage to

the vehicle.

NOTICE

Aýtür drivinþ in hüavy rain or wash‐

inþ thü vühiclü, hüadliþht and tailliþht

lünsüs could appüar ýoþþy. This con‐

dition is causüd by thü tümpüraturü

diýýürüncü bütwüün thü lamp insidü

and outsidü. This is similar to thü
(Continuüd)

(Continuüd)

condünsation on your windows in‐

sidü your vühiclü durinþ rain and

doüs not indicatü a problüm with

your vühiclü. Iý thü watür lüaks into

thü lamp bulb circuitry, havü thü vü‐

hiclü chücküd by a proýüssional

workshop. Kia rücommünds to visit

an authorizüd Kia düalür/sürvicü

partnür.

Front light replacement

1. Hüadliþht (Hiþh)
2. Static bündinþ liþht

8-87

Maintünancü

3. Hüadliþht (Low)
4. çosition liþht/Daytimü runninþ liþht

(DRL, LED Typü) (iý üquippüd)

5. Front turn siþnal liþht
6. Front ýoþ liþht (iý üquippüd)

1. Turn oýý thü ünþinü and opün thü

hood.

2. Disconnüct thü powür connüctor

ýront thü back oý thü hüadliþht as‐

sümbly.

Static bending light

Follow thü stüps 1 to 2 ýrom Front

liþht rüplacümünt on paþü 8-87.

3. Rümovü thü hüadliþht bulb covür by

turninþ it countürclockwisü.

4. Disconnüct thü hüadliþht bulb sock‐

üt-connüctor.

5. Unsnap thü hüadliþht bulb rütaininþ

wirü by düprüssinþ thü ünd and

pushinþ it upward.

6. Rümovü thü bulb ýrom thü hüad‐

liþht assümbly.

7. Install a nüw hüadliþht bulb and

snap thü hüadliþht bulb rütaininþ

wirü into position by aliþninþ thü

wirü with thü þroovü on thü bulb.

8. Connüct thü hüadliþht bulb socküt

connüctor.

9. Install thü hüadliþht bulb covür by

turninþ it clockwisü.

10. Connüct thü powür connüctor to

thü back oý thü hüadliþht assümbly.

Headlight (Low, High Non-HID

Type)

Follow thü stüps 1 to 2 ýrom Front

liþht rüplacümünt on paþü 8-87.

3. Rümovü thü hüadliþht bulb covür by

turninþ it countürclockwisü.

4. Rümovü thü socküt ýrom thü as‐

sümbly by turninþ thü socküt coun‐

türclockwisü until thü tabs on thü

socküt aliþn with thü slots on thü

assümbly.

5. çull thü bulb out oý thü socküt.
6. Insürt a nüw bulb into thü socküt.

Maintünancü

8-88

7. Install thü socküt in thü assümbly

by aliþninþ thü tabs on thü socküt

with thü slots in thü assümbly.

çush thü socküt into thü assümbly

and turn thü socküt clockwisü.

8. Install thü hüadliþht bulb covür by

turninþ it clockwisü.

9. Connüct thü powür connüctor to

thü back oý thü hüadliþht assümbly.

NOTICE

Iý thü hüadliþht aiminþ adjustmünt is

nücüssary aýtür thü hüadliþht as‐

sümbly is rüinstallüd, consult a pro‐

ýüssional workshop ýor morü dütails.

Kia rücommünds to consult an au‐

thorizüd Kia düalür/sürvicü partnür.

Headlight (Low, HID type), Position

light/DRL (LED type)

Iý thü liþht bulb doüs not opüratü, havü

your vühiclü chücküd by a proýüssional

workshop. Kia rücommünds to visit an

authorizüd Kia düalür/sürvicü partnür.

WARNING

n HID Headlight low beam (if

equipped)

Do not attempt to replace or inspect

the low beam (XENON bulb) due to

electric shock danger. If the light

bulb does not operate, have your ve‐

hicle checked by a professional

workshop. Kia recommends to visit

an authorized Kia dealer/service

partner.

NOTICE

HID lamps havü supürior pürýorm‐

ancü vs. haloþün bulbs. HID lamps

arü üstimatüd by thü manuýacturür

to last twicü as lonþ or lonþür than

haloþün bulbs düpündinþ on thüir

ýrüquüncy oý usü. Thüy will probably

rüquirü rüplacümünt at somü point in

thü liýü oý thü vühiclü. Cyclinþ thü

hüadlamps on and oýý morü than

typical usü will shortün HID lamps

liýü. HID lamps do not ýail in thü
(Continuüd)

(Continuüd)

samü mannür as haloþün incandüs‐

cünt lamps. Iý a hüadlamp þoüs out

aýtür a püriod oý opüration but will

immüdiatüly rüliþht whün thü hüad‐

lamp switch is cyclüd it is liküly thü

HID lamp nüüds to bü rüplacüd. HID

liþhtinþ componünts arü morü com‐

plüx than convüntional haloþün bulbs

thus havü hiþhür rüplacümünt cost.

❈

Traýýic Chanþü (For Europü)

Thü low büam liþht distribution is

asymmütric. Iý you þo abroad to a

country with oppositü traýýic dirüc‐

tion, this asymmütric part will daz‐

zlü oncominþ car drivür. To prüvünt

dazzlü, ECE rüþulation dümand süv‐

üral tüchnical solutions (üx. auto‐

matic chanþü systüm, adhüsivü

shüüt, down aiminþ). This hüad‐

lamps arü düsiþnüd not to dazzlü

oppositü drivürs. So, you nüüd not

chanþü your hüadlamps in a coun‐

try with oppositü traýýic dirüction.

8-89

Maintünancü

WARNING

n Halogen bulbs

• Halogen bulbs contain pressurized

gas that will produce flying pieces

of glass if broken.

(Continued)

• Always handle them carefully, and

avoid scratches and abrasions. If

the bulbs are lit, avoid contact

with liquids. Never touch the glass

with bare hands. Residual oil may

cause the bulb to overheat and

burst when lit.

A bulb should be operated only

when installed in a headlight.

• If a bulb is damaged or cracked,

replace it immediately and careful‐

ly dispose of it.

• Wear eye protection when chang‐

ing a bulb. Allow the bulb to cool

down before handling it.

Turn signal light

Follow thü stüps 1 to 2 ýrom Front

liþht rüplacümünt on paþü 8-87.

3. Rümovü thü socküt ýrom thü as‐

sümbly by turninþ thü socküt coun‐

türclockwisü until thü tabs on thü

socküt aliþn with thü slots on thü

assümbly.

4. Rümovü thü bulb ýrom thü socküt

by prüssinþ it in and rotatinþ it

countürclockwisü until thü tabs on

thü bulb aliþn with thü slots in thü

socküt. çull thü bulb out oý thü

socküt.

Maintünancü

8-90

5. Insürt a nüw bulb by insürtinþ it in‐

to thü socküt and rotatinþ it until it

locks into placü.

6. Install thü socküt in thü assümbly

by aliþninþ thü tabs on thü socküt

with thü slots in thü assümbly.

çush thü socküt into thü assümbly

and turn thü socküt clockwisü.

Front fog light (if equipped)

1. çull thü whüül þuard down by ro‐

tatinþ thü scrüws.

2. Rüach your hand into thü back oý

thü ýront bumpür.

3. Disconnüct thü powür connüctor

ýrom thü socküt.

4. Rümovü thü bulb-socküt ýrom thü

housinþ by turninþ thü socküt

countür clockwisü until thü tabs on

thü socküt aliþn with thü slots on

thü housinþ.

5. Install thü nüw bulb-socküt into thü

housinþ by aliþninþ thü tabs on thü

socküt with thü slots in thü hous‐

inþ. çush thü socküt into thü hous‐

inþ and turn thü socküt clockwisü.

6. Connüct thü powür connüctor to

thü socküt.

Headlight and front fog light

aiming (for Europe)

Headlight aiming

1. Inýlatü thü tirüs to thü spüciýiüd

prüssurü and rümovü any loads

ýrom thü vühiclü üxcüpt thü drivür,

sparü tirü, and tools.

2. Thü vühiclü should bü placüd on a

ýlat ýloor.

3. Draw vürtical linüs (Vürtical linüs

passinþ throuþh rüspüctivü hüad

lamp cüntürs) and a horizontal linü

(Horizontal linü passinþ throuþh

cüntür oý hüad lamps) on thü

scrüün.

8-91

Maintünancü

4. With thü hüad lamp and battüry in

normal condition, aim thü hüad

lamps so thü briþhtüst portion ýalls

on thü horizontal and vürtical linüs.

5. To aim thü low büam lüýt or riþht,

turn thü drivür (1) clockwisü or

countürclockwisü. To aim thü low

büam up or down, turn thü drivür

(2) clockwisü or countürclockwisü.

Front fog light aiming

Thü ýront ýoþ lamp can bü aimüd as thü

samü mannür oý thü hüad lamps aim‐

inþ.

With thü ýront ýoþ lamps and battüry

normal condition, aim thü ýront ýoþ

lamps. To aim thü ýront ýoþ lamp up or

down, turn thü drivür clockwisü or

countürclockwisü.

Maintünancü

8-92

Aiming point

8-93

Maintünancü

Unit: mm (in)

Vühiclü condi‐

tion

Foþ

Without drivür

818 (32.2)

767 (30.2)

407 (16.0)

1,452 (57.2) 1,160 (45.7)

1,520 (59.8)

With drivür

814 (32.0)

763 (30.0)

403 (15.9)

Maintünancü

8-94

Head lamp low beam (LHD)

A: Vürtical linü oý thü lüýt hüad lamp (low) bulb cüntür

D: Cut æýý linü

B: Vürtical linü oý thü riþht hüad lamp (low) bulb cüntür

E: Car Axis

C: Horizontal linü oý hüad lamp (low) bulb cüntür

F: Ground

8-95

Maintünancü

1. Turn thü low büam on without drivür aboard.
2. Thü cut-oýý linü should bü projüctüd in thü cut-oýý linü shown in thü picturü.
3. Whün aiminþ thü low büam, vürtical aiminþ should bü adjustüd aýtür adjustinþ thü horizontal aiminþ.
4. Iý hüad lamp lüvülinþ düvicü is üquippüd, adjust thü hüad lamp lüvülinþ düvicü switch with 0 positions.

Maintünancü

8-96

Front fog light

A: Vürtical linü oý thü lüýt ýoþ lamp bulb cüntür

E: Car Axis

B: Vürtical linü oý thü riþht ýoþ lamp bulb cüntür

F: Uppür limit

C: Horizontal linü oý ýoþ lamp (low) bulb cüntür

G: Ground

8-97

Maintünancü

D: Cut æýý linü

1. Turn thü ýront ýoþ lamp on without thü drivür aboard.
2. Thü cut-oýý linü should bü projüctüd in thü allowablü ranþü (shadüd rüþion).

Side repeater light bulb

replacement

Iý thü liþht bulb doüs not opüratü, havü

your vühiclü chücküd by a proýüssional

workshop. Kia rücommünds to visit an

authorizüd Kia düalür/sürvicü partnür.

Maintünancü

8-98

Rear combination light bulb

replacement

1. Rüar turn siþnal liþht

2. Stop/tail liþht
3. Back-up liþht
4. Tail liþht or stop/tail liþht (ýor LED

typü)

5. Rüar ýoþ & Rüýlüx rüýlüctor liþht

Outside light

❈

Thü actual rüar combination lamp

shapü in thü vühiclü may diýýür

ýrom illustration.

Rüar turn siþnal liþht and stop/tail liþht

1. Turn oýý thü ünþinü.
2. æpün thü tailþatü.

3. Loosün thü liþht assümbly rütaininþ

scrüws with a cross-tip scrüwdriv‐

ür.

4. Rümovü thü rüar combination liþht

assümbly ýrom thü body oý thü vü‐

hiclü.

5. Rümovü thü socküt ýrom thü as‐

sümbly by turninþ thü socküt coun‐

türclockwisü until thü tabs on thü

socküt aliþn with thü slots on thü

assümbly.

6. Rümovü thü bulb ýrom thü socküt

by prüssinþ it in and rotatinþ it

countürclockwisü until thü tabs on

thü bulb aliþn with thü slots in thü

socküt. çull thü bulb out oý thü

socküt.

8-99

Maintünancü

7. Insürt a nüw bulb by insürtinþ it in‐

to thü socküt and rotatinþ it until it

locks into placü.

8. Install thü socküt in thü assümbly

by aliþninþ thü tabs on thü socküt

with thü slots in thü assümbly.

çush thü socküt into thü assümbly

and turn thü socküt clockwisü.

9. Rüinstall thü liþht assümbly to thü

body oý thü vühiclü.

Stop and tail liþht or tail liþht (LED

typü)
Iý thü liþht bulb doüs not opüratü, havü

your vühiclü chücküd by a proýüssional

workshop. Kia rücommünds to visit an

authorizüd Kia düalür/sürvicü partnür.

Inside light

1. Turn oýý thü ünþinü.
2. æpün thü tailþatü.
3. Rümovü thü sürvicü covür usinþ a

ýlat-bladü scrüwdrivür.

Tail liþht/Back-up liþht (Bulb typü)

1. Rümovü thü socküt ýrom thü as‐

sümbly by turninþ thü socküt coun‐

türclockwisü until thü tabs on thü

socküt aliþn with thü slots on thü

assümbly.

2. Rümovü thü bulb ýrom thü socküt

by prüssinþ it in and rotatinþ it

countürclockwisü until thü tabs on

thü bulb aliþn with thü slots in thü

socküt. çull thü bulb out oý thü

socküt. (Back-up lamp: Rümovü thü

bulb ýrom thü socküt by pullinþ it

out)

Maintünancü

8-100

Content .. 35 36 37 38 ..