Haima S5. Instruction - part 15

 

  Index      Haima     Haima S5. Instruction

 

Search            copyright infringement  

 

 

 

 

 

 

 

 

Content      ..     13      14      15      16     ..

 

 

Haima S5. Instruction - part 15

 

 

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Malfunctions and Troubleshooting
Make sure to stop the vehicle
probably the serious damage of
emission control system. This
immediately and contact the
the engine.
shall be especially cautioned.
sales and service shop of Haima
In event of such malfunction,
◆ Light-up of engine oil
Car Co.,Ltd
park the vehicle safely on the
pressure indicator lamp
◆ Light-up of emission
roadside, pull up the handbrake
The engine oil pressure
malfunction warning lamp
operating lever, and stop the
indicator lamp shall not light up
When the
emission
engine. After
5min, restart the
during the normal running of the
malfunction warning lamp on
engine and observe this warning
engine. If the engine oil pressure
the instrument lights up, it
lamp. If this lamp lights up still,
indicator lamp flashes during the
indicates that certain emission
please contact the sales and
running of the engine, it
control system of the engine is
service shop of Haima Car
indicates that the engine oil
malfunctioned. The failure to
Co.,Ltd
pressure is abnormal and shall
take treatment measure will
Notice: The further driving with
be
checked
immediately.
impair
the
fuel-saving
the
emission
malfunction
Otherwise, the running under
performance of the vehicle and
warning lamp on will probably
low oil pressure will lead to
lead to deteriorated exhaust
lead to damage of engine
mechanical damages.
emission contamination or even
Page 224 of 250

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Malfunctions and Troubleshooting
The emergency measure is
engine and observe the engine
◆ Light-up of charging
as below:
oil pressure indicator lamp. If
indicator lamp
Drive the vehicle to the
the indicator lamp fails to go out
If the charging system
roadside carefully, stop the
within
10s, please stop the
indicator lamp lights up during
engine, and pull up the parking
engine immediately and contact
normal running of the engine, it
brake lever tightly. Cool down
the sales and service shop of
indicates that the charging
the engine for approximate 5min
Haima Car Co.,Ltd
system ceases to charge the
and open the engine hood to
Tip: If the engine changes
battery. This is an abnormal
check the engine oil level.
suddenly from high load
symptom. In such case, turn off
Though the engine oil level is
condition to idling condition, the
all
electric
accessories
not directly related to the engine
engine oil pressure indicator
immediately, stop the use of
oil pressure, if the engine oil
lamp will probably flash. This is
other electric control devices
level is low, the oil pressure will
a normal symptom. The
(such as power window), and
drop while making a turn or
indicator speed will go out when
keep the running of the engine.
during other driving operations.
the engine speed is increased
Pay special attention not to stop
Please add the engine oil to the
slightly.
the engine, as the restart of the
appropriate level. Start the
engine will consume much
Page 225 of 250

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Malfunctions and Troubleshooting
electric energy. In such case,
cab
(beneath the instrument
Notice: The fuse is the
carefully drive the vehicle to the
panel).
protection device for the vehicle
sales and service shop of Haima
● Engine compartment fuse
electric devices. If a fuse is
Car Co.,Ltd or repair shop for
case, located beneath the engine
burnt frequently, it indicates that
technical assistance.
hood.
the electric device or circuit
◆ Checking and replacement
If certain lamp, accessory,
being protected is malfunctioned.
of fuses
or control device can’t work
Any minor issue can't be ignored.
All electric circuits on the
normally, please check the
Make sure to check and solve by
vehicle are fitted with fuses, in
protection device of related
sales and service shop of Haima
order to prevent the damage of
circuits. If a fuse is burnt, its
Car Co.,Ltd
electric
devices
due
to
internal metal wire is already
◆ Cab fuse case
short-circuit or overload.
melted. If the replacement fuse
If the electric system within
The fuses of the electric
is burnt again, the electric device
the cab fails to work,
system are installed within two
in question can’t be used further.
● Firstly check the cab fuse
fuse cases respectively:
Contact the sales and service
case and replace burnt fuse.
● Cab fuse case, located on
shop of Haima Car Co.,Ltd as
● Turn off ignition switch and
the left front lower portion of the
soon as possible.
other switches.
Page 226 of 250

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Malfunctions and Troubleshooting
● Open the fuse case and pull
● If no backup fuse is
electric system and even cause
out the fuse with fuse pliers
available, use the fuse of same
serious accidents.
attached in the fuse case.
capacity from other electric
● Check the fuses and replace
circuits, which will not impair
burnt fuses.
the operations of the vehicle.
● Insert the fuses of same
Warning: Make sure to replace
capacity and ensure the tight
with fuse of same capacity, or it
installation of the fuses.
will probably damage the
Page 227 of 250

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Malfunctions and Troubleshooting
Fuse
Protected
Description
capacity
component
1
Sunroof
20A
Sunroof
2
Cigarette lighter
15A
Cigarette lighter
ACC power
3
ACCT
10A
supply
5
Gear P valve body
10A
Gear P valve body
CD\DVD power
6
Audio system
10A
supply
ECU power
7
ECU
5A
supply
8
Interior lamp
10A
Interior lamp
Rear washer
9
Rear washer
15A
motor
17
BCM
40A
BCM
10
A/C
10A
A/C
18
PEPS1
15A
PEPS1
11
Front wiper
20A
Front wiper motor
19
PEPS2
15A
PEPS2
12
Rear defroster
15A
Rear defroster
20
PEPS3
15A
PEPS3
13
AVM
10A
AVM main unit
Power
Power
22
30A
14
Instrument
10A
Instrument
window
window
15
Engine
10A
Engine
16
DCU
10A
DCU
Page 228 of 250

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Malfunctions and Troubleshooting
◆ Engine compartment fuse case
If the cab fuse case is normal but some electric devices still can’t work, check the fuse case beneath the
engine hood. Make sure to replace if there is any burnt fuse.
● Turn off ignition switch and all other switches.
● Open the lock plate from the lock plate side of the fuse case cover, open the fuse case cover, and
remove the fuse case cover.
● Replace the burnt fuse (if any) with new fuse of same capacity. To replace 10A fuse, operate as per the
following procedure:
● Turn off the ignition switch.
● Disconnect the negative cable of battery.
● Open the fuse case cover and unplug the burnt fuse with fuse pliers attached in the fuse case.
● From the spare fuse location within the fuse case, select one 10A fuse and insert to corresponding fuse
location.
Notice: The engine compartment fuse case is mainly functioned to protect the engine and its electric devices
and all lamps outside of the cab.
Page 229 of 250

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Malfunctions and Troubleshooting
Fuse
Protected
Description
Type
capacity
component
1
BTN
40A
Main circuit
Slow-blowing
2
Fan
40A
Fan
Slow-blowing
3
Main relay
30A
Main relay
Slow-blowing
4
ABS1/ESC1
30A
ABS1/ESC1
Slow-blowing
5
ABS2/ESC2
40A
ABS2/ESC2
Slow-blowing
6
Cooling fan
40A
Cooling fan
Slow-blowing
Ignition lock
7
Ignition lock 1
40A
Slow-blowing
1
Ignition lock
8
Ignition lock 2
40A
Slow-blowing
2
Electric seat
9
Electric seat (left)
30A
Slow-blowing
Quick
(left)
15
BCM1
20A
BCM1
break
Electric seat
Electric seat
10
30A
Slow-blowing
Brake
Quick
16
15A
(right)
(right)
Brake
lamp
break
11
Fuel pump
15A
Fuel pump
Quick break
Quick
17
Low beam
15A
Low beam
Front fog
break
12
Front fog lamp
15A
Quick break
lamp
Quick
18
High beam
15A
High beam
13
Marker lamp
15A
Marker lamp
Quick break
break
Compresso
Quick
14
TCU
20A
TCU
Quick break
19
Compressor
10A
r
break
Page 230 of 250

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Malfunctions and Troubleshooting
Capacity
Controlled
Relay description
Type
component
1
Fuel pump relay
30A
Fuel pump
2
Compressor relay
30A
Compressor
3
Low speed fan relay
30A
Low speed fan
4
Main relay
30A
Power supply of
power system
5
Fan high speed relay
30A
Fan
6
Reversing lamp relay
30A
Reversing lamp
7
High speed fan relay
80A
High speed fan
Quick
8
High beam relay
80A
High beam
15
BCM1
20A
BCM1
break
9
Fan relay
80A
Fan
Brake
Quick
16
Brake
15A
10
Vacuum booster pump
30A
Vacuum booster
lamp
break
relay
pump
Low
Quick
17
15A
Low beam
11
Rear defroster relay
30A
Rear defroster
beam
break
system
High
High
Quick
18
15A
beam
beam
break
12
Low beam relay
30A
Low beam
Compres
Compress
Quick
13
Marker lamp relay
30A
Marker lamp
19
10A
sor
or
break
14
Front fog lamp relay
30A
Front fog lamp
Plug-in
15
Gear P locking relay
30A
Gear P lock
Plug-in
Page 231 of 250

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Malfunctions and Troubleshooting
◆ Light-up of brake system
lever is completely released, it
● Park the vehicle on the
warning lamp
indicates that the service brake
roadside, pull up the parking
The brake system warning
system is malfunctioned and
brake lever tightly, and stop the
lamp has the warning functions
shall be checked.
engine. Check the brake fluid
in following three aspects.
Notice: The brake system is
level and when necessary add
● Parking brake warning
directly related to the driving
the brake fluid.
When the ignition switch is
safety. Do not continue the
● After adding the brake fluid,
at position ON, this warning
driving before the malfunction is
check the brake system warning
lamp will light up after the
solved.
lamp again.
parking brake handle is pulled
◆ Brake fluid level warning
● If the warning lamp still
up tightly. This indicator lamp
If the depressing force of
lights up, it indicates that the
will go out after the parking
the brake pedal is heavy or weak,
anti-lock brake system (ABS) is
brake lever is released.
it will lead to prolonged braking
malfunctioned.
If this indicator lamp still
distance and the warning lamp
◆ ABS warning
lights up after the parking brake
will light up.
Page 232 of 250

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Malfunctions and Troubleshooting
This warning lamp lights
parking brake lever tightly, stop
of flat tire. Elevate the body and
up when the anti-lock brake
the engine, and turn on the
remove the wheel assembly.
system (ABS) is malfunctioned.
hazard warning lamp. Take out
The malfunction of anti-lock
the warning triangle and place at
brake system (ABS) will directly
the position
100m behind the
impair the working performance
vehicle.
of the brake system (especially
● Use driver’s tool to take out
Jack crank
on wet and snowy roads) and
the spare wheel assembly.
Socket wrench
will probably lead to lock of
● Take out the jack and place
wheels.
Therefore,
please
beneath the lower lateral beam
contact the sales and service
of the body. Rotate the jack
shop of Haima Car Co.,Ltd
screw with rocker arm and
immediately, instead of the
socket wrench to slowly elevate
Elevate position
further driving.
the body. Before the tire is off
◆ Replacement of wheels
the ground, remove the wheel
● Park the vehicle at a
central cap and loosen the nuts
spacious roadside, pull up the
Page 233 of 250

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Malfunctions and Troubleshooting
Notice: The dynamic balance
● In event of accident, firstly
test
is
required for the
stop the engine, turn on hazard
replacement wheel other than
warning lamp, and place
the spare wheel. The dynamic
warning triangle 30m behind the
balance amount shall be less
vehicle.
than 5g and the total weight of
● If the doors are blocked,
the counterbalances for each
escape from the broken window
wheel shall be less than 100g.
or rear windscreen, instead of
● Replace with spare wheel
◆ Driving accidents
attempting to break the front
and tighten nuts.
Avoid the accidents as far
windscreen
(as
the
front
● Lower the jack and install
as possible during driving. In
windscreen adopts laminated
the wheel central cap.
event of accident, stay calm and
glass).
● Place the spare wheel
handle calmly as per the traffic
● Report to the traffic
assembly, jack, and driver’s tool
regulations.
administration via telephone. On
to the designated positions
The emergency measure is
the expressway, use the special
within trunk and ensure the
as below:
telephone on the roadside.
secure placement.
Page 234 of 250

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Malfunctions and Troubleshooting
● In event of rearward impact
The rescue of wounded is
pull four limbs or bend the head
on the expressway (the impact
as below:
and lay the body as level as
danger by vehicles behind is
● Morally, everyone is liable
possible.
really high, especially under
for rescuing the wounded.
◆ Towing
poor visibility condition), leave
Please call the 120 and request
the vehicle and evacuate to
for emergency rescue.
outside
of
the
guardrail
● Loosen or cut off the seat
immediately.
belt restraining the wounded.
Platform trolley
● Upon detection of fuel or
● Generally, do not provide
other chemical smell, do not
food or beverage to the wounded,
smoke.
unless the waiting time is really
● In event of fire, extinguish
long.
with fire extinguisher, carpet,
● Move the wounded out of
and sand. It's absolutely
the vehicle only there is a danger
prohibited to use water for fire
of fire, flooding, fall-off from
extinguishment.
cliff, or similar danger. While
moving out the wounded, do not
Page 235 of 250

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Malfunctions and Troubleshooting
When the vehicle is
drive system are intact. If
level roads. Drive the vehicle
incapable of driving or is
damaged, the platform vehicle
linearly at a speed no more than
inappropriate for driving due to
must be used.
10km/h. Avoid the sudden
malfunction or accident so that
● The towing hook is fitted
braking during the towing, or it
the towing by other vehicle is
on both front and rear of the
will easily damage the towing
required, take the following
vehicle.
For short-distance
hook.
method. To ensure correct
movement, the vehicle can be
Notice: For the vehicle equipped
towing method and prevent
towed with wire rope by other
with CVT transmission, it’s
damaging the vehicle, it’s better
vehicle.
prohibited to tow the vehicle
to ask for towing service
● Before the towing, rotate
with the front wheels onto the
company for towing. At the time
the ignition key to position ACC,
ground.
Otherwise,
the
of towing, elevate the drive
shift the transmission to neutral
transmission will be seriously
wheels
(front wheels) off the
gear, and release the parking
damaged.
ground, as shown in the figure.
brake.
● At the time of towing,
Tip: The towing of vehicle by
please pay attention to ensure
front and rear towing hooks is
that the steering system and
only limited to the relatively
Page 236 of 250

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Technical Specifications
Chapter VI Technical Specifications
◆ Geometric parameters of finished vehicle (HMA7161GA4W/HMA7151GA4W/HMA7151GC4W)
Item
Unit
HMA7161GA4W
HMA7151GA4W
HMA7151GC4W
Overall length
mm
4358
Overall width
mm
1823
Overall height
mm
1630
Wheelbase
mm
2630
Front wheel
mm
1540
Wheeltread
Rear wheel
mm
1545
Minimum ground clearance
mm
160
Approach angle/departure
°
19/27
angle (unloaded)
Minimum turning radius
m
10.9
Page 237 of 250

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Technical Specifications
◆ Masses and other parameters of finished vehicle
Vehicle model/transmission
HMA7161GA4W/5MT
HMA7151GA4W/6MT
HMA7151GC4W/CVT
Curb weight kg
1350
1432
1435
Front axle kg
773
832
845
Rear axle kg
577
600
590
Maximum permissible gross weight kg
1725
1807
1810
Front axle kg
890
947
950
Rear axle kg
835
860
860
Fuel type and grade
93# gasoline or above
93# gasoline or above
93# gasoline or above
Emission level at delivery
Chinese Stage-IV
Chinese Stage-IV
Chinese Stage-IV
Fuel consumption of complete vehicle
7.3L/100km
7.6 L/100km
8.0 L/100km
User purchased model
Page 238 of 250

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Technical Specifications
◆ Engine specification
Vehicle model
HMA7161GA4W
HMA7151GA4W
HMA7151GC4W
Engine model
HMA GN16-VF1
HMA GN15-TF
HMA GN15-TF
Rated power/speed (kw/rpm)
90/6000
120/5500
120/5500
Rated torque/speed (N.m/rpm)
153/4000
210/(1800-4000)
210/(1800-4000)
Number of cylinders and
Inline 4-cylinder
Inline 4-cylinder
Inline 4-cylinder
arrangement mode
Number of valves per cylinder
4
4
4
Cylinder bore × Stroke (mm)
74.8×90.5
74.8×85.2
74.8×85.2
Total displacement (ml)
1591
1497
1497
Compression ratio
10:1
9.5:1
9.5:1
Top net power/ Corresponding
85/6000
113/5500
113/5500
speed (kw/rpm)
Top torque/Corresponding speed
153/4000
210/(1800-4000)
210/(1800-4000)
(N.m/rpm)
Idling speed (r/min)
750±50
750±50
750±50
Page 239 of 250

 

 

 

 

 

 

 

Content      ..     13      14      15      16     ..