Vauxhall Signum (2007 year). Instruction - part 3

 

  Index      Vauxhall     Vauxhall Signum (2007 year) - instruction in english

 

Search            copyright infringement  

 

 

 

 

 

 

 

 

 

Content      ..     1      2      3      4      ..

 

 

Vauxhall Signum (2007 year). Instruction - part 3

 

 

Keys, doors, windows, sun roof
35
Vauxhall alarm system 3
Monitors
z the doors, luggage compartment,
bonnet,
z the passenger compartment,
z vehicle tilt, e.g. if it is raised,
z the ignition.
9 Warning
Do not use the system if there are people
in the vehicle! The doors cannot be
unlocked from the inside.
To lock
To activate
Press button p on the remote control
All doors, windows, the sun roof 3 and the
- or -
bonnet must be closed. Within no more
central locking switch m in driver’s door -
than10 seconds of locking, press button p
press when doors are closed.
on the remote control again.
Open tailgate
If the ignition was switched on, the driver’s
door must be opened and closed again so
9
Warning
that the Vauxhall alarm system can be
activated again.
Do not drive with the luggage
compartment open, e.g. when
transporting bulky objects, since toxic
exhaust gas could penetrate the interior.
Also, the number plate cannot be clearly
read unless the luggage compartment is
closed.
Fitting of accessories on the tailgate will
increase its weight. If it becomes too heavy,
the tailgate will then not stay open.
36
Keys, doors, windows, sun roof
After the first 10 seconds of the Vauxhall
alarm system activation:
z LED flashes
= System switched on
slowly
z LED comes
= Switch-off function
on for approx.
1 second
If a system fault occurs, contact a
workshop for assistance.
Activation without monitoring of
Light emitting diode (LED)
passenger compartment and vehicle tilt
During the first 10 seconds of the Vauxhall
Activate e.g. when animals are left in the
alarm system activation:
vehicle.
z LED comes on = Test, switch-on delay
1. Close tailgate and bonnet.
z LED flashes
= Door, luggage
2. Press button Ä, LED in button flashes
quickly
compartment, open
(maximum of 10 seconds), see next
bonnet or system
column.
faults
3. Close doors.
4. Switch on the Vauxhall alarm system.
LED illuminates. After approx. 10
seconds the system is activated, without
monitoring of the passenger
compartment or vehicle tilt. LED flashes
until system is switched off.
Keys, doors, windows, sun roof
37
Note
z Changes to the vehicle interior, such as
the use of seat covers, could impair the
function of passenger compartment
monitoring.
z Disable interior monitoring if the interior
of the vehicle switched off is being
heated.
Alarm
An alarm can be triggered whilst the
Vauxhall alarm system is active:
z an acoustic signal (horn) and
z a visual signal (hazard warning lights).
The number of alarms and the duration
To deactivate
Child safety locks
thereof are stipulated by law.
Press button q of the remote control
- or -
The alarm can be silenced by pressing a
9 Warning
turn on the ignition.
button of the remote control or by
switching on the ignition. The Vauxhall
Use the child safety lock whenever
If there is a fault in the remote control,
alarm system is deactivated at the same
children are occupying the rear seats.
unlock vehicle as described on page 33.
time.
Disregard may lead to injuries or
If the alarm is triggered when the driver’s
endanger life. Vehicle passengers should
door is opened, deactivate the Vauxhall
be informed accordingly.
alarm system by switching on the ignition.
Turn rotary knob at rear door lock from the
vertical position using key: door cannot be
opened from inside.
38
Keys, doors, windows, sun roof
The programmed universal remote control
4. Press the button on the instruction remote
can replace the individual remote control
control unit while pressing and holding
units of the systems to be operated. Three
the desired button of the universal
buttons on the underside of the mirror
remote control.
housing can be used to operate various
5. The control indicator in the mirror
systems.
housing will flash slowly at first. As soon
Consult your Vauxhall Authorised Repairer
as it flashes rapidly, release both
for details on compatible systems.
buttons. The universal radio control
system is now programmed for the
9
Warning
chosen system.
6. To program other buttons with other
Ensure that no persons, animals or
systems, repeat steps 3 to 5.
objects are in the movement zone of the
system to be operated (e.g. a garage
If a system cannot be operated after
door). Vehicle passengers should be
repeated programming, and the control
Universal remote control in mirror
informed of the hazards.
indicator flashes rapidly for a short time
housing 3
after the relevant button has been pressed
to operate up to 3 different remotely
Basic programming of the universal radio
and then illuminates for 2 seconds, the
operated systems (e.g. garage door,
control system
receiver may be equipped with a variable
domestic alarm system, domestic exterior
1. Switch on ignition.
code system, see next page.
lighting).
2. When programming for the first time,
press both outer buttons under the
mirror housing, until the control indicator
alongside the buttons flashes rapidly.
3. Hold the instruction remote control unit at a
distance of 0 to 30 cm from the control
button area of the mirror housing.
Keys, doors, windows, sun roof
39
Programming the universal radio control
Reprogramming individual button
Note
system for variable code systems
settings
Keep replaced instruction transmitters for
1. Perform basic programming - see
If a button that has already been
possible reprogramming. The instruction
previous page.
programmed is to be used for a different
transmitters can also continue to be used.
system, repeat steps 3 to 5 of the basic
2. Activate synchronisation mode of
If, after repeated attempts at execution of
programming procedure described
system (see system manufacturer’s
the above steps, a system cannot be
previously.
system operating instruction) and briefly
actuated with the universal remote control,
press the pre-programmed button on
Clearing down all programmed button
seek the assistance of a workshop.
the universal remote control three times
settings
During programming, the vehicle should be
within 30 seconds.
Before selling the vehicle, it is a good idea
within the range of the receiver. Under no
to erase button settings.
3. The radio control system is now
circumstances should the vehicle be in the
programmed for variable code systems.
Button settings can only be erased all at
movement zone of a system (e.g. garage
To program other systems for variable
once. It is not possible to erase individual
door).
codes, repeat steps 1 and 2 for the other
button settings. Buttons can, however, be
Do not program a system without an
buttons of the universal remote control
individually reprogrammed, see
automatic safety stop (manufactured
system.
"Reprogramming individual button
before April 1982).
settings".
Using the universal radio control system
Take note of the system manufacturer’s
With the ignition on, press the required
In order to erase the programming of all
safety instructions for drives and instruction
universal radio control button, and the
3 buttons, press both outer buttons and
remote control units.
control indicator in the mirror housing will
release as soon as the LED begins to flash
illuminate. The pre-programmed system
(after approx. 20 seconds). All button
can now be operated using the universal
settings have now been cleared and can be
radio control system.
programmed anew at any time.
40
Keys, doors, windows, sun roof
Exterior mirrors
Swinging in exterior mirror
For the safety of pedestrians, the exterior
Instruction: The exterior mirrors can be folded
mirrors will swing out of their normal
Adjusting exterior mirrors 3
in by gently pressing the outer edge of the
mounting position if they are bumped with
Adjustment using the four-way switch in
housing.
sufficient force. Reposition the mirror by
the driver’s door: If the outer mirror
applying slight pressure to the mirror
switch 1 is pressed, the four-way switch
Electric 3 (both mirror switches must not be
housing.
operates the driver and passenger
latched into position):
mirrors 3, if the inner mirror switch 2 is
Aspherical exterior mirror 3
Push four-way switch to the right: outside
pressed, it only operates the passenger
The aspherical mirror glass makes the blind
rear view mirrors swivel in.
mirror.
angle smaller. The curvature makes objects
Push four-way to the left: outside rear view
look smaller, making it more difficult to
The glass of the mirror is adjusted in the
mirrors swivel out.
estimate how far away following vehicles
relevant direction in accordance with the
are.
operation of the four-way switch.
Return the mirrors to the driving position
before starting off.
Electrical seat adjustment with Memory
function 3:
The mirrors can be retracted from the
If the inner mirror switch 2 is pressed, the
outside: Press button p on the remote
passenger-side exterior mirror is pointed
control approx. 1 second. The mirrors will
automatically at the rear tyres after
be extended the next time the vehicle is
reverse gear is engaged in order to assist
unlocked.
parking (not if towing a trailer) 3.
Swivelling only allowed at speeds of up to
4 mph (7 km/h).
Keys, doors, windows, sun roof
41
Automatic anti-dazzle exterior mirrors 3
on the driver’s side
Dazzle from following vehicles at night is
automatically reduced.
The mirror does not reduce dazzle when:
z the ignition is switched off,
z reverse gear is engaged or selector lever
set to R,
z the interior lights are on,
z a door is open.
Interior mirror
Automatic anti-dazzle interior mirror 3
Dazzle from following vehicles at night is
To adjust, swivel mirror housing.
automatically reduced.
Swivel lever on underside of mirror housing
The sensor is located at the bottom of
to reduce dazzle from following vehicles at
the housing. In the case of vehicles with
night.
a position memory for electrically operated
front seats 3 or a universal remote
control 3, the sensor is located at the top
right of the mirror glass.
The mirror does not reduce dazzle when:
z the ignition is switched off,
z reverse gear is engaged or selector lever
set to R,
z the interior lights are on,
z a door is open.
42
Keys, doors, windows, sun roof
Electric windows
9 Warning
Take care when operating the electronic
windows. Risk of injury, especially for
children. Vehicle occupants should be
informed accordingly.
If there are children on the rear seat,
switch on the child safety system 3 for
the electric windows.
Keep a close watch on the windows when
closing them. Ensure that nothing
becomes trapped in them as they move.
Operation via 2 rocker buttons in the
Vehicles with rear 3 electric windows have
The electric windows can be used
driver’s door. Additional rocker buttons in
a slide switch between the buttons in the
the front passenger door and the rear
driver’s door
z with ignition on,
doors 3.
z up: the front windows can be operated
z within 10 minutes of switching ignition
To operate window in stages, tap switch.
using the buttons,
off,
For automatic opening or closing, keep
z down: the rear windows can be operated
z within 10 minutes of opening or closing
switch pressed for slightly longer; to stop
using the buttons.
the driver’s door,
window movement, tap switch again.
z within 10 minutes of inserting or
removing the ignition key.
Readiness for operation stops when the
vehicle is locked.
Keys, doors, windows, sun roof
43
Safety function
If the window glass encounters resistance
above the middle of the window during
automatic closing, it is immediately
stopped and the window opened again.
If the windows do not move easily (e.g. on
account of frost), keep pressing the switch
for the window in question until the window
has been closed in stages.
Child safety system for rear windows 3
Closing windows from outside
Switch z in the driver’s door
The windows can be closed from
outside using the remote control: Depress
z press (switch z illuminates in red): rear
the p button until the windows are closed.
windows cannot be operated using the
buttons in the rear doors,
z press again (switch z no longer
illuminates in red): rear windows can be
operated using the buttons in the rear
doors.
44
Keys, doors, windows, sun roof
Automatic closing 3
Fault
see page 33.
If the windows cannot be opened and
closed automatically, activate the window
Overload
electronics as follows:
If the windows are repeatedly operated at
short intervals, the power supply is briefly
1. Close doors.
cut off.
2. Switch on ignition.
The system is protected by fuses in the fuse
3. Window completely open.
box - see page 243.
4. Close window and press on button for at
least 3 seconds.
5. Repeat for each window.
Windows in rear doors
Turn hand crank 3 towards the front or
rear.
Keys, doors, windows, sun roof
45
Sun roof 3
To raise
Turn the rotary switch to any position
9
Warning
between d and e. The sun roof will
automatically move to the desired position.
Caution when operating the sun roof.
When the switch is in position e, the sun
Risk of injury, particularly to children.
roof is fully raised.
Vehicle passengers should be informed
To lower
accordingly.
Turn rotary switch to d.
Keep a close watch on the sliding roof
Position memory
when closing it. Ensure that nothing
After the ignition has been switched on, the
becomes trapped as it moves.
sun roof can be automatically returned to
its last position by briefly pressing the
The electric sun roof can be operated
rotary switch.
z with ignition on,
Operated using rotary switch in the
z within 10 minutes of switching ignition
overhead control panel.
off,
To open
z within 10 minutes of opening or closing
Turn the rotary switch to any position
the driver’s door,
between d and ü. The sun roof will
z within 10 minutes of inserting or
automatically move to the desired position.
removing the ignition key.
When the switch is in position ü, the sun
Readiness for operation stops when the
roof is fully opened.
vehicle is locked.
Comfort position
Set rotary switch to position f. With the
roof in this position, wind noise is reduced.
To close
Turn rotary switch to d.
46
Keys, doors, windows, sun roof
Safety function
Automatic closing 3
If the sun roof encounters resistance during
see page 33.
automatic closing, it is immediately
Sun shade
stopped and opened again, as long as the
To reduce the sunlight in the interior with
vehicle is stationary.
the sliding roof closed or raised.
9 Warning
Open or close sun shade as required.
When the sun roof is opened, the sun shade
If when the vehicle is being driven the sun
is also opened.
roof encounters resistance during
automatic closing, because of the higher
closing forces involved the protective
function cannot be guaranteed, and
there is a risk of injury.
Closing sun roof from outside
If the sun roof movement is stiff, e.g. due to
To close the sun roof from outside with the
frost, turn rotary switch to d and keep it
remote control: Press button p until the
pressed until the sun roof is closed.
sun roof is closed.
If the windows are to be closed from
outside the vehicle, but the sun roof is to be
left open, briefly press the rotary switch
before switching off the ignition.
Keys, doors, windows, sun roof
47
Overload
3. Turn rotary switch to ü and keep it
If the system is overloaded, the power
depressed until the sun roof is open.
supply is automatically cut off for a short
4. Turn rotary switch to d and keep it
time.
depressed until the sun roof is closed.
Fault
5. Turn rotary switch to e and leave there
If the sun roof no longer assumes the
until the sun roof is fully raised.
desired position automatically, program
sun roof electronics as follows:
6. Turn rotary switch to d and keep it
depressed until the sun roof is closed.
1. Switch on ignition.
2. Press the rotary switch until the sun roof
is shut, then keep it pressed for at least a
further 3 seconds.
Roller blinds at rear door
windows 3
To reduce sunlight at the rear seats.
Pull the blind upwards using the grip and
engage it at the top in the door frame.
48
Seats, interior
Seats, interior
Instructionly adjustable front seats
48
Electrically adjustable front seats 3 ..
50
Head restraints
53
Armrest 3 between the front seats
55
Armrest between rear seats
56
Rear seats
56
Travel Assistant 3
58
Luggage compartment extension
65
Luggage compartment cover
67
Safety net 3
68
Instructionly adjustable front seats
Adjusting the backrest
Lashing eyes
69
To adjust, turn side handwheel on the seat
Notes on loading the vehicle
70
9
Warning
while releasing the load on the backrest.
Three-stage safety system
71
Three-point seat belts
71
Move backrest to suit seating position.
Never adjust seats during driving, as they
Belt tensioners
72
can move uncontrollably.
Operating the seat belts
75
Child restraint system 3
77
Adjust seat longitudinally
To adjust seat position, pull handle at front
Airbag System
80
of seat, move seat and then release
Cigarette lighter 3
94
handle.
Accessory socket 3
94
Ashtray
95
Stowage compartments
96
Drink holders
97
Sun visors
97
Seats, interior
49
Adjusting the seat height 3
To adjust seat incline 3
Adjusting the lumbar support 3
To adjust height of seat, operate lever on
Pump action of lever
To adjust, activate the lever on the
outboard rear side of seat.
Upwards:
Seat steeper
backrest, relieving pressure on the backrest
as you do so.
Pump action of lever
Downwards:
Seat flatter
Upwards:
Seat higher
Adjust lumbar support to suit personal
requirements.
Downwards:
Seat lower
50
Seats, interior
Electrically adjustable front
seats 3
9 Warning
Care must be taken when operating the
electrically adjustable seats. There is a
risk of injury, particularly for children, and
a danger that articles could become
trapped.
Keep a close watch on the seats when
adjusting them.
Vehicle passengers should be informed
accordingly.
To adjust thigh support 3 on the sports
Seat position
seats 3
Adjust driver’s seat such that with the
Adjustment
To adjust, press button in recessed grip
driver sitting upright the steering wheel is
The seat position can be adjusted by
located in the centre beneath the adjusting
held in the area of its upper spokes with the
means of switches on the outboard side of
cushion and move the thigh support.
driver’s arms slightly bent.
the seats.
Adjust thigh support to suit personal
Push passenger seat as far back as
Adjusting the inclination
requirements.
possible.
Move switch 1 upwards/downwards at
front.
The seat backrests must not be tilted too
far back (recommended tilting angle
approx. 25°).
9 Warning
Failure to observe the descriptions could
lead to injuries which could be fatal.
Vehicle passengers should be informed
accordingly before starting off.
Seats, interior
51
Adjusting the longitudinal position
Electrically operated lumbar support 3 on
Seat position
Move switch 1 forwards/backwards.
driver’s seat
Adjust driver’s seat such that with the
Adjust lumbar support using four-way
driver sitting upright the steering wheel is
Height adjustment
switch on outboard side of driver’s seat.
held in the area of its upper spokes with the
Move switch 1 upwards/downwards at rear
driver’s arms slightly bent.
Adjust lumbar support to suit personal
Seat backrest adjustment
requirements.
Push passenger seat as far back as
Turn switch 2 forwards/backwards.
possible.
Moving support up and down: push button
Operate switch until desired seat position is
up or down.
The seat backrests must not be tilted too
reached. Seat position - see page 51.
far back (recommended tilting angle
Increasing and decreasing support: push
After adjusting the seat, adjust height of
approx. 25°).
button forward or backward.
seat belt - see page 75.
Thigh support 3 on driver’s seat
9 Warning
see page 50.
Failure to observe the descriptions could
lead to injuries which could be fatal.
Vehicle passengers should be informed
accordingly before starting off.

 

 

 

 

 

 

 

Content      ..     1      2      3      4      ..