Porsche Cayenne (2010 year). Instruction - part 6
6. Close sliding/lifting roof
To close the roof - turn to the right.
To open the roof - turn to the left.
7. Remove the key and return it to the storage
tray.
8. Clip in cover.
f Have the fault remedied at an authorized
Porsche dealer.
5. Insert the key in opening C. This requires a so-
mewhat greater effort.
Windows and Sliding Roofs
95
Brief overview -
Panorama roof system
This brief overview does not replace the informa-
tion provided in the chapter “Panorama roof
system”.
In particular, warnings are not replaced by this
brief overview.
Elements of the Panorama roof system
Switch in the roof console
What do I want to do?
What do I have to do?
What do I see?
Open roof completely
Turn switch to position C.
Roof elements 2 and 3 open.
(roof elements 2 and 3)
Open roof element 2
Turn switch to position B.
Only roof element 2 opens.
Open roof element 3
Turn switch to position E.
Only roof element 3 opens.
Lift roof element 3
Turn switch to position D.
Only roof element 3 is lifted.
Close roof
Turn switch to position A.
All opened roof elements are closed.
96 Windows and Sliding Roofs
Caution!
Panorama roof system
Risk of damage when activating the
The Panorama roof system of your Porsche
Panorama roof system due to improperly
consists of a total of four roof elements.
atteched roof elements.
Roof element 1 is the draft deflector. This
f Check that the roof elements are securely
adjusts itself according to the speed, and helps
attached before starting to drive.
protect from the disturbing effects of the wind
when the Panorama roof system is open,
f Make sure there is sufficient clearance
especially at high speeds or from turbulent air
between the Panorama roof system and the
flow.
attached roof elements.
Both roof elements 2 and 3 can be moved by
activating the knob in the vehicle's longitudinal
Readiness for operation of the
direction. Roof element 3 can also be raised.
Panorama roof system
This allows the interior to be better ventilated.
- With ignition switched on.
Roof element 4 is a fixed glass element and
completes the Panorama roof system.
- With ignition key withdrawn until door is
first opened, but only for a maximum of
1 - Draft deflector
2 - Sliding roof element
10 minutes.
3 - Sliding/lifting roof element
4 - Fixed glass element
Readiness function of the Panorama roof
system switches off after 10 minutes
If the vehicle is unlocked, the Panorama roof sys-
tem can no longer be operated after 10 minutes
(to save the vehicle battery). The power supply is
switched back on when the ignition is switched on
or the engine started.
Windows and Sliding Roofs
97
Warning!
C - Opens Panorama roof system
completely
Risk of injury when operating or automati-
cally closing the Panorama roof system.
f Turn knob beyond the stop position B to switch
f Ensure that no one can be injured when the
position C.
Panorama roof system is operated.
Roof elements 2 and 3 will be opened
completely.
f Always withdraw ignition key when leaving the
The roller blind will open automatically to the
vehicle or switch ignition off in vehicles that
selected opening width.
have Porsche Entry & Drive. Always take the
ignition key with you when leaving the vehicle.
Uninformed persons (e.g. children) could injure
D - Raises sliding/lifting roof element
themselves by operating the Panorama roof
Turn knob to switch position D.
system.
Roof element 3 will be raised completely. The
f In case of danger, operate the knob in the
roller blind does not change position here.
opposite direction or release the car key
immediately.
E - Opens sliding/lifting roof element
completely
A - Close Panorama roof system completely
B - Open sliding roof element completely
A - Closes Panorama roof system
f Turn knob to switch position E.
C - Open Panorama roof system completely
completely
D - Sliding/lifting roof element in lift position
f Roof element 3 will be opened completely.
E - Open sliding/lifting roof element completely
f Turn knob to switch position A.
The roller blind will open automatically to the
selected opening width.
Note on operation
B - Opens sliding roof element completely
Using the automated presetting system, every
usable roof position can be controlled directly with
f Turn knob to switch position B.
the knob.
Roof element 2 will be opened completely.
The roller blind will open automatically to the
f Always keep the Panorama roof system and
selected opening width.
the side windows closed while driving off-road.
98 Windows and Sliding Roofs
Comfort function on vehicles without
Force limiter for the Panorama roof
Save final position of the Panorama roof
Porsche Entry & Drive
system
system
Opening and closing the Panorama roof
All roof elements are equipped with a force limiter.
After disconnecting/reconnecting the vehicle
system
If the sliding roof or the sliding/lifting roof element
battery or if the vehicle battery is discharged, or
is obstructed during the closing or opening
after emergency starting with jumper cables, the
f Hold the car key in the door lock in the
process, the respective roof element opens or
final positions of the Panorama roof system are
unlocking or locking position until the windows
closes again immediately.
lost.
and the Panorama roof system have reached
the desired position.
Closing a roof element after triggering the
Warning!
force limiter
Comfort function on vehicles with
Risk of injury when closing the Panorama
1. Remove the obstruction.
Porsche Entry & Drive
roof system. The force limiter is not available
2. Turn knob to position A again.
and the roof elements will close with full
Opening and closing the Panorama roof
force.
system
Electric emergency closing function
f
Ensure that no one can be injured when the
f Hold the car key in the door lock in the
Panorama roof system is closing.
unlocking or locking position until the windows
Warning!
and the Panorama roof system have reached
1.
Switch ignition off.
Risk of injury from the emergency closing
the desired position.
function for the Panorama roof system. The
2.
Turn knob to position A.
force limiter is not available and the roof
Closing the Panorama roof system
3.
Switch ignition on.
elements will close with full force.
f Hold the button in the door handle when
4.
Press knob up at its front edge in position A
locking the vehicle until the windows and the
f Ensure that no one can be injured when the
and keep pressed.
Panorama roof system have reached the
Panorama roof system is closing.
The teaching process begins after around
desired position.
5 seconds. Hold the knob pressed in position
If the roof cannot be closed due to dirt, ice, or
until the roller blind and all roof elements have
similar substances:
completely stopped moving. The procedure
1. Turn knob to position A.
lasts a maximum of 20 seconds.
2. Hold the knob in position A until all roof
5.
Release the knob.
elements are completely closed.
The raised sliding/lifting roof element 3 clo-
ses automatically. The teaching process is
then completed.
Windows and Sliding Roofs
99
Note on operation
Opening/closing the roller blind
If the procedure is interrupted, saving the final
The rocker switch has a two-stage function:
positions must be started from the beginning.
- If the rocker switch is pressed to the first
stage, the roller blind opens or closes as long
as the rocker switch is being pressed.
- If the rocker switch is pressed completely, the
roller blind opens or closes to the final
position.
Opening the roller blind
f Press rocker switch to the rear F.
Closing the roller blind
f Press rocker switch to the front G.
Note
Roller blind
If the rocker switch is pressed completely while
A roller blind is integrated into the Panorama roof
the roof elements are moving, the roller blind
system and can be adjusted by activating the
opens or closes to the final position after the roof
rocker switch in the roof console.
elements have reached the selected position.
100 Windows and Sliding Roofs
Roller blind cleaning position
Emergency operation of the Panorama
roof system
1.
Close Panorama roof system and roller blind
completely.
Use emergency operation only under exceptional
circumstances if the electric emergency closing
2.
Turn knob to position C. The Panorama roof
function cannot be implemented and the end
system opens completely.
position cannot be stored.
3.
When the Panorama roof system has reached
f Before using emergency operation, please
the final position, hold the rocker switch G to
check whether the fuse is defective. After the
the front for longer than 3 seconds, until the
fuse has been changed, the limit positions of
roller blind is completely closed.
the Panorama roof system will have to be
4.
Remove dirt (e.g., leaves).
stored again.
5.
Keep the rocker switch F pressed to the rear,
Danger!
until the roller blind is completely closed.
Danger of injury and risk of damage when
6.
Close sliding roof element.
closing the roof.
Caution!
f Ensure that no one is in the way of the roof ele-
1.
Fold up armrest.
ments as they are being opened or closed.
Risk of damage if the Panorama roof system
2.
Remove key B from the lower storage tray
and roller blind are in the roller blind
f Do not operate the Panorama roof system with
(underneath the rubber mat) in the center
cleaning position while driving.
the knob during and after emergency
console.
operation
f Close the Panorama roof system completely
one time before driving off.
Windows and Sliding Roofs
101
5. Hold the key in this position and turn.
To close the roof - turn clockwise.
To open the roof - turn counter-clockwise.
Note on operation
When using emergency closing for the sliding/
lifting roof element, make sure that the roof
element is completely closed (center position
between sliding and lifting roof position).
6. Remove the key and return it to the storage
tray.
7. Clip in cover.
To rule out malfunctions in the system, the final
positions of the Panorama roof system must be
saved again after emergency operation.
f Please see the chapter “SAVE FINAL POSITION
3.
Unclip cover.
OF THE PANORAMA ROOF SYSTEM” on
4.
Insert the key in opening H or I until it can be
Page 99.
felt and heard to engage.
Effort is required to insert the key.
H - Emergency operation for the sliding roof
element and the draft deflector
I - Emergency operation for the sliding/lifting
roof element
102 Windows and Sliding Roofs
Lights, Turn Signals and Windshield Wipers
Light Switch
104
Instrument Illumination
105
Automatic Headlight Beam Adjustment
106
Turn signal/High Beam/
Headlight Flasher Stalk
106
Emergency flasher
107
Interior Lighting
107
Comfort Lighting
109
Coming Home Function
(Auto Shut Off Delay)
109
Door-Surrounding Lighting
109
Brief overview - Windshield wipers
110
Windshield Wiper/Washer Stalk
111
Lights, Turn Signals and Windshield Wipers
103
Note on operation
If the ignition key is withdrawn and the door is
opened while the lights (not the parking light) are
on, an acoustic signal (gong) warns of possible
battery discharge.
In some countries, differences are possible
due to provisions of law.
Automatic driving light assistant
The driving light assistant is a comfort function.
Your Porsche’s driving light (low beam) is switched
on and off automatically, irrespective of the
ambient brightness.
Despite possible support by the driving light assis-
tant, it is the responsibility of the driver to switch
on the driving light using the conventional light
Light switch with driving light assistant
Light switch without driving light assistant
switch in accordance with the relevant national
regulations.
Fog lights
Light Switch
Activating the headlights using the driving light
Only when side lights or low beam are
assistant does not therefore absolve the driver of
Light is switched off.
switched on:
responsibility for the correct operation of the
Pull switch to first click.
Automatic driving light assistant
driving light.
Indicator light lights up.
The low beam is switched on automatically in the
Side lights
following situations:
Rear fog light
License plate light, instrument illuminati-
- Dusk
on
Pull switch to second click.
Indicator light lights up.
- Darkness
Low beam, high beam
- Travelling through tunnels
Only when the ignition is switched on
- Rain (in conjunction with the rain sensor)
- Highway driving
104
Lights, Turn Signals and Windshield Wipers
Note on operation
f Please see the chapter “COMING HOME
FUNCTION (AUTO SHUT OFF DELAY)” on
Fog is not recognized.
Page 109.
f In the event of fog, the driving light must be
switched on instructionly.
Daytime driving lights
Warning!
Regulations for switching daytime driving lights on
and off vary according to the legal requirements in
Risk of accident due to driving without lights.
each country.
f Always carefully monitor the automatic driving
The position lights at the front and rear and the low
light control.
beam headlight come on when the ignition is
switched on.
Highway function
The instrument and switch illumination in the
The light is switched on at speeds of over 87 mph
interior of the vehicle remains off.
(140 km/h). If you are travelling slower than
The daytime driving lights go off when the ignition
40 mph (65 km/h), the driving light is switched off
is switched off. A warning message appears on
after a delay of approx. 2 minutes, if the external
the multi-purpose display in the instrument panel if
lighting conditions permit.
the light switch is in position 0 (light switched off).
A - Instrument lighting knob
Switch on the light at the light switch if necessary
Rain function
(e.g. when you switch off the ignition at a closed
Instrument Illumination
The driving light is switched on after five seconds
rail crossing).
of continuous wiper operation.
When the light is switched on, the brightness of
f For information on warning messages on the
the instrument illumination can be adjusted by
The driving light is switched off approx. 4 minutes
multi-purpose display:
after the wipers have stopped.
Please see the chapter “OVERVIEW OF
turning thumb wheel A.
WARNING MESSAGES” on Page 149.
Off delay and door-surrounding lighting
USA only:
Off delay and door-surrounding lighting are active
when the automatic driving light assistant is
You can activate/deactivate the daytime driving
switched on.
lights on the multi-purpose display in the instru-
ment panel.
f Please see the chapter “DOOR-SURROUNDING
LIGHTING” on Page 109.
f Please see the chapter “SWITCHING DAYTIME
DRIVING LIGHTS ON/OFF” on Page 145.
Lights, Turn Signals and Windshield Wipers
105
1 - Turn signal light, left
Automatic Headlight Beam
Adjustment
2 - Turn signal light, right
Move the stalk to the upper or lower pressure
Vehicles with Bi-Xenon headlights feature
point - turn signals flash three times
automatic headlight beam adjustment.
3 - High beam (push forward)
When the ignition and the low beam are switched
4 - Headlight flasher (pull backward)
on, the level of the headlight beam automatically
Lever in center position - low beam
changes in accordance with the vehicle load. The
(when the light is switched on)
level of the headlight beam is automatically kept
constant during acceleration and braking.
5 - Button for voice control
Checking operation
f Please see the separate Owner’s Instruction for
Porsche Communication Management (PCM).
1. Switch the low beam on.
2. Switch ignition on.
Note on operation
The light beam first dips all the way down and
When the high beam is switched on or the head-
is then adapted to the vehicle load. It this test
light flasher is operated, the blue indicator light on
item is not met, the headlight beam adjustment
the speedometer is lit.
Turn signal/High Beam/Headlight
system must be checked by an authorized
Porsche dealer.
Flasher Stalk
Parking light
Turn signals, low beam and high beam are ready
The parking light can only be switched on when
for operation when the ignition is on.
the ignition is switched off.
f Move the lever up or down to switch on the
right or left parking light.
106 Lights, Turn Signals and Windshield Wipers
Danger!
Risk of an accident resulting in serious
personal injury or death.
f Whenever stalled or stopped for emergency
repairs, move the car well off the road. Switch
on the emergency flasher and mark the car
with road flares or other warning devices.
f Do not remain in the car. Someone
approaching from the rear may not realize your
vehicle is stopped and cause a collision.
Danger of fire.
f Do not park or operate the vehicle in areas
where the hot exhaust system may come in
contact with dry grass, brush, fuel spill or
other flammable material.
Hot engine compartment components can
A, C- Switch for individual reading lights
Emergency flasher
burn skin on contact.
B - Switch for interior light
The emergency flasher is ready for use regardless
f Before working on any part in the engine
of the ignition lock position.
Interior Lighting
compartment, turn the engine off and let it cool
down sufficiently.
Switching on and off
Reading lights, front
f Press button A to switch on.
Switching on
Press button A again to switch off.
f Press button A or C.
All turn signal lights and indicator lights on the
Switching off
dashboard flash when the switch is operated.
f Press button A or C.
Lights, Turn Signals and Windshield Wipers
107
Interior light, front
Switching on and off automatically
Switching on
f
Move toggle switch to center position.
f Move switch B to the left.
The lights are switched on when a door is
unlocked or opened or when the ignition key is
Switching on and off automatically
withdrawn from the ignition lock.The lights are
f Move switch B to the right.
switched off with a delay of approx.
30 seconds after the door is closed. The light
The lights are switched on when a door is
goes out immediately as soon as the ignition is
unlocked or opened or when the ignition key is
switched on or the vehicle is locked.
withdrawn from the ignition lock.The lights are
switched off with a delay of approx.
Switching off
30 seconds after the door is closed. The light
goes out immediately as soon as the ignition
f
Move toggle switch back.
key is inserted in the ignition lock or the vehicle
is locked.
Switching off
f Move switch B to center position.
Reading lights, rear left
Rear reading lights
Switching on
f Move toggle switch forward.
108 Lights, Turn Signals and Windshield Wipers
Dimming (adjusting the brightness of) the
Door-Surrounding Lighting
comfort lighting
The door-surrounding lighting enables passengers
Once the last door is closed, the footwell and door
to enter the vehicle safely. Obstacles on the
panel lights are dimmed to the set value.
ground (e.g. puddles) can be identified more
easily.
The comfort lighting is dimmed using button A in
the front roof console.
The area in front of the vehicle is illuminated with
the following lights when the vehicle is unlocked by
f Hold down button A until the level of brightness
remote control or by Porsche Entry & Drive:
that you require is reached.
- Low beam
Coming Home Function (Auto Shut
- Lights in the door mirrors
Off Delay)
- Side marker light
The following lights remain switched on for a
certain period to allow you to get out of the vehicle
- License plate lights.
safely and with the best possible view at dusk or
Note on operation
in darkness:
f Set light switch to auto.
A - Button for dimming the comfort lighting
- Lights in the door mirrors
f Please see the chapter “LIGHT SWITCH” on
- Side marker light
Comfort Lighting
Page 104.
- Lincense plate lights.
The footwell and door panel lighting improve your
The door-surrounding lighting switches off after
orientation inside the vehicle when it is dark.
the Coming Home light (light that is used during
Note on operation
These lights are switched on when the vehicle is
twilight hours) that has been set on the multi-
f Set light switch to auto.
unlocked and switched off again automatically
purpose display has expired or when the ignition is
when the vehicle is locked.
f Please see the chapter “LIGHT SWITCH” on
switched on.
Page 104.
f For information on setting the off delay on the
multi-function display:
The lights are switched off when the vehicle is
Please see the chapter “SETTING LIGHTING
locked or, at the latest, after the Coming Home
OFF DELAY” on Page 146.
light that has been set on the multi-purpose
display has expired.
f Please see the chapter “SETTING LIGHTING
OFF DELAY” on Page 146.
Lights, Turn Signals and Windshield Wipers
109
Brief overview - Windshield wipers
This brief overview does not replace the informati-
on provided in the chapter “Windshield wiper/
washer stalk”.
In particular, warnings are not replaced by this
brief overview.
Windshield wiper stalk
Rain sensor rotary switch
What do I want to do?
What do I have to do?
Automatic wiping at front
Press the stalk to detent position 1.
(rain sensor)
Rain sensor adjustment
Adjust rotary switch A in the stalk upwards (wipe more often) or downwards (wipe less often).
Wiping at front
Slow: Move the stalk to detent position 2.
Fast: Move the stalk to detent position 3.
Once: Briefly press stalk to position 4.
Spraying and wiping at front
Pull stalk to position 5 and hold.
Wiping at rear
Normal: Press stalk to position 6.
Once: Briefly move stalk to position 7.
Spraying and wiping at rear
Keep stalk pressed in position 7.
110 Lights, Turn Signals and Windshield Wipers
f
Always switch the windshield wipers off (wiper
Windshield Wiper/Washer Stalk
stalk in position 0) before opening the engine
compartment lid. If the wiper arms are not in
Warning!
end position, they will automatically move to
Danger of injury when the windshield wipers
this position when the engine compartment lid
operate unintentionally.
is opened. This will happen even if the ignition
Risk of damage to the engine compartment
is off.
lid, windshield and wiper system.
The wiper arms remain in this position until the
lid is closed and the wiper system is switched
f
Only wipe the windshield when sufficiently wet,
off and then on again.
otherwise it could be scratched.
f
Loosen frozen wiper blades before driving off.
f
Do not operate headlight washer when it is
frozen.
f
Always switch off windshield wipers in car
wash to prevent them wiping unintentionally
(rain sensor operation).
0 - Windshield wipers off
f
Do not operate headlight washer in car
1 - Front windshield wiper - rain sensor
washes.
operation
f
Always switch off windshield wipers before
f Move wiper stalk upwards to the first click.
cleaning the windshield to avoid unintentional
operation (rain sensor operation).
Notes on operation
f
Always hold the wiper arm securely when
The amount of precipitation which has settled on
replacing the wiper blade.
the windshield is measured. Wiper speed is auto-
matically adjusted accordingly.
Lights, Turn Signals and Windshield Wipers
111