|
|
Prosthetics Testing of ankle-foot devices and foot units Guidance on the application of the test loading conditions of ISO 22675 and
ISO
TR 22676
on the design of appropriate test equipment First Edition
Information technology Telecommunications and information exchange between systems Using CSTA for SIP phone user agents
ISO
TR 22767
(uaCSTA) First Edition
Welding consumables Predicted and measured FN in specifications A position statement of the experts of IIW Commission IX First
ISO
TR 22824
Edition
ISO
TR 22869
Medical laboratories Guidance on laboratory implementation of ISO 15189:2003 First Edition
ISO
TR 22898
Review of outputs for fire containment tests for buildings in the context of fire safety engineering First Edition
Accuracy (trueness and precision) of measurement methods and results Practical guidance for the use of ISO 5725-2:1994 in
ISO
TR 22971
designing, implementing and statistically analysing interlaboratory repeatability and reproducibility results First Edition
Ophthalmic implants Intraocular lenses Guidance on assessment of the need for clinical investigation of intraocular lens design
ISO
TR 22979
modifications First Edition
ISO
TR 23000-1
Information technology ù Multimedia application format (MPEG-A) ù Part 1: Purpose for multimedia application formats First edition
Information technology Common Language Infrastructure (CLI) Technical Report on Information Derived from Partition IV XML File
ISO
TR 23272
Second Edition
ISO
TR 23462
Space systems ù Guidelines to define the management framework for a space project First Edition
ISO
TR 23602
Toughness of chain steels First Edition
Information technology Telecommunications and information exchange between systems Corporate Telecommunication Networks
ISO
TR 23627
Mobility for Enterprise Communications First Edition
ISO
TR 24094
Analysis of natural gas Validation methods for gaseous reference materials First Edition
Intelligent transport systems ù System architecture, taxonomy and terminology ù Procedures for developing ITS deployment plans
ISO
TR 24098
utilizing ITS system architecture First Edition
ISO
TR 24430
Paints and varnishes Guidelines for the determination of the precision of a test method by interlaboratory trials First Edition
ISO
TR 24498
Paper, board and pulps Estimation of uncertainty for test methods First Edition
Intelligent transport systems Systems architecture, taxonomy and terminology Using CORBA (Common Object Request Broker
ISO
TR 24532
Architecture) in ITS standards, data registries and data dictionaries First Edition
ISO
TR 24704
Information Technology - Customer premises cabling for wireless access points First Edition
Information technology Office machines Machines for colour image reproduction Method of specifying image reproduction of colour
ISO
TR 24705
devices by digital and analog test charts First Edition
Information technology Radio frequency identification for item management Elementary tag licence plate functionality for ISO/IEC
ISO
TR 24710
18000 air interface definitions First Edition
Information technology Programming languages, their environments and system software interfaces Technical Report on the
ISO
TR 24715
Conflicts between the ISO/IEC 9945 (POSIX) and the Linux Standard Base (ISO/IEC 23360) First Edition
Information technology Programming languages Guide for the use of the Ada Ravenscar Profile in high integrity systems First
ISO
TR 24718
Edition
ISO
TR 24722
Information technology ù Biometrics ù Multimodal and other multibiometric fusion First Edition
Information technology - Programming languages, their environments and system software interfaces - Extensions to the C library
ISO
TR 24731-1
Part 1: Bounds-checking interfaces First Edition
ISO
TR 24741
Information technology ù Biometrics tutorial First Edition
ISO
TR 24746
Information technology Generic cabling for customer premises Mid-span DTE power insertion First Edition
Information technology û Assessment and mitigation of installed balanced cabling channels in order to support 10GBASE-T First
ISO
TR 24750
edition
ISO
TR 24774
Software and systems engineering ù Life cycle management ù Guidelines for process description First Edition
ISO
TR 24857
Synthetic industrial diamond grit products Single-particle compressive failure strength ôDiaTest-SIö system First edition
ISO
TR 25107
Non-destructive testing Guidelines for NDT training syllabuses First Edition
ISO
TR 25108
Non-destructive testing Guidelines for NDT personnel training organizations First Edition
Earth-moving machinery Guidelines for assessment of exposure to whole-body vibration of ride-on machines Use of harmonized
ISO
TR 25398
data measured by international institutes, organizations and manufacturers First Edition
ISO
TR 25438
Information technology Common Language Infrastructure (CLI) Technical Report: Common Generics First Edition
Cranes Jib cranes International Standards for design, manufacturing, use and maintenance requirements and recommendations
ISO
TR 25599
First Edition
Mechanical testing of metals - Symbols and definitions in published standards First Edition; Together with ISO 23718 replaces ISO
ISO
TR 25679
TR 12735-1:1996
ISO
TR 25901
Welding and related processes ù Vocabulary Soudage et techniques connexes ù Vocabulaire First Edition
Information technology Telecommunications and information exchange between systems Enterprise Communication in Next
ISO
TR 26905
Generation Corporate Networks (NGCN) involving Public Next Generation Networks (NGN) First Edition
Cranes ù Tower cranes ù International Standards for design, manufacture, use and maintenance requirements and
ISO
TR 27245
recommendations First edition
ISO
TR 27609
Vibration in hand-held tools ù Vibration measurement methods for grinders ù Evaluation of round-robin test First Edition
Workplace atmospheres ù Ultrafine, nanoparticle and nano-structured aerosols ù Inhalation exposure characterization and
ISO
TR 27628
assessment First edition
ISO
TR 27809
Health informatics - Measures for ensuring patient safety of health software First Edition
ISO
TR 28980
Ophthalmic optics ù Spectacle lenses ù Parameters affecting lens power measurement First Edition
ISO
TS 2963
Cheese and processed cheese products Determination of citric acid content Enzymatic method First Edition
ISO
TS 3567
Vacuum gauges - Calibration by direct comparison with a reference gauge First Edition
ISO
TS 3632-1
Saffron (Crocus sativus L.) Part 1: Specification First Edition: Replaces ISO 3632-1; 1993
ISO
TS 3632-2
Saffron (Crocus sativus L.) Part 2: Test methods First Edition: Replaces ISO 3632-2; 1993
ISO
TS 3669-2
Vacuum technology - Bakable flanges - Part 2: Dimensions of knife-edge flanges First Edition
ISO
TS 3716
Hydrometry Functional requirements and characteristics of suspendedsediment samplers First Edition;: 1977
ISO
TS 4949
Steel names based on letter symbols First Edition
Milk and dried milk, buttermilk and buttermilk powder, whey and whey powder Detection of phosphatase activity First Edition IDF/RM
ISO
TS 6090
82:2004(E)
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings Thermoplastics Recommended
ISO
TS 7024
practice for installation First Edition; Supersedes ISO TR 7024
ISO
TS 7240-9
Fire detection and alarm systems Part 9: Test fires for fire detectors First Edition
Tobacco and tobacco products Preparation and constitution of identical samples from the same lot for collaborative studies for the
ISO
TS 7821
evaluation of test methods First Edition; Replaces ISO TR 7821: 1982
ISO
TS 8611-2
Pallets for materials handling Flat pallets Part 2: Performance requirements and selection of tests First Edition
ISO
TS 8611-3
Pallets for materials handling ù Flat pallets ù Part 3: Maximum working loads First Edition [Replaced: ISO 8611]
Earth-moving machinery Multilingual listing of equivalent terms Part 1: General Engins de terrassement Liste multilingue de termes
ISO
TS 9250-1
Úquivalents Partie 1: Termes gÚnÚraux First Edition
Earth-moving machinery Multilingual listing of equivalent terms Part 2: Performance and dimensions Engins de terrassement Liste
ISO
TS 9250-2
multilingue de termes Úquivalents Partie 2: Performance et dimensions First Edition
ISO
TS 9941
Milk and canned evaporated milk Determination of tin content Spectrometric method Second Edition
Microbiology of food and animal feeding stuffs Horizontal method for detection and enumeration of Campylobacter spp. Part 2:
ISO
TS 10272-2
Colony-count technique First Edition; Together with ISO 10272-1: 2006 replaces ISO 10272: 1995
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 27: Implementation Methods:
ISO
TS 10303-27
Java TM Programming Language Binding to the Standard Data Access Interface with Internet/Intranet Extensions First Edition
Industrial automation systems and integration Product data representation and exchange Part 28: Implementation methods: XML
ISO
TS 10303-28
representations of EXPRESS schemas and data First Edition
Industrial automation systems and integration Product data representation and exchange Part 35: Conformance testing
ISO
TS 10303-35
methodology and framework: Abstract test methods for standard data access interface (SDAI) implementations First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 304: Abstract Test Suite:
ISO
TS 10303-304
Mechanical Design Using Boundary Representation First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 324: Abstract Test Suite:
ISO
TS 10303-324
Mechanical Product Definition for Process Plans Using Machining Features First Edition
Industrial automation systems and integration Product data representation and exchange Part 325: Abstract test suite: Building
ISO
TS 10303-325
elements using explicit shape representation First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 332: Abstract Test Suite:
ISO
TS 10303-332
Technical Data Packaging Core Information and Exchange First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 1001: Application Module:
ISO
TS 10303-1001
Appearance Assignment First Edition; CD-Rom Application Modules
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 1002: Application Module: Colour
ISO
TS 10303-1002
First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 1003: Application Module: Curve
ISO
TS 10303-1003
Appearance First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 1004: Application Module:
ISO
TS 10303-1004
Elemental Geometric Shape First Edition; CD-Rom Application Modules
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 1005: Application Module:
ISO
TS 10303-1005
Elemental Topology First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 1006: Application Module:
ISO
TS 10303-1006
Foundation Representation Second Edition; CD-Rom Application Modules
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 1007: Application Module:
ISO
TS 10303-1007
General Surface Appearance First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 1008: Application Module: Layer
ISO
TS 10303-1008
Assignment First Edition
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 1009: Application Module: Shape
ISO
TS 10303-1009
Appearance and Layers First Edition
Underground installation of flexible glass-reinforced pipes based on unsaturated polyester resin (GRP-UP) ù Part 1: Installation
ISO
TS 10465-1
procedures First Edition [Superseded: ISO TR 10465-1]
Mechanical Vibration and Shock - Vibration and Shock in Buildings with Sensitive Equipment - Part 1: Measurement and Evaluation
ISO
TS 10811-1
First Edition
ISO
TS 10811-2
Mechanical Vibration and Shock - Vibration and Shock in Buildings with Sensitive Equipment - Part 2: Classification First Edition
ISO
TS 10839
Polyethylene Pipes and Fittings for the Supply of Gaseous Fuels - Code of Practice for Design, Handling and Installation First Edition
Biological evaluation of medical devices Part 19: Physico-chemical, morphological and topographical characterization of materials
ISO
TS 10993-19
First Edition
Biological evaluation of medical devices Part 20: Principles and methods for immunotoxicology testing of medical devices First
ISO
TS 10993-20
Edition
ISO
TS 11073-92001
Health informatics ù Medical waveform format ù Part 92001: Encoding rules First Edition
Microbiology of Food and Animal Feeding Stuffs - Guidelines on Preparation and Production of Culture Media - Part 1: General
ISO
TS 11133-1
Guidelines on Quality Assurance for the Preparation of Culture Media in the Laboratory First Edition
Microbiology of food and animal feeding stuffs Guidelines on preparation and production of culture media Part 2: Practical guidelines
ISO
TS 11133-2
on performance testing of culture media First Edition
ISO
TS 11139
Sterilization of Health Care Products - Vocabulary Sterilisation Des Produits De Sante - Vocabulaire Second Edition
Road Vehicles - Air Filters for Passenger Compartments - Part 1: Test for Particulate Filtration First Edition; Supersedes ISO TR
ISO
TS 11155-1
11155-1:1994
ISO
TS 11155-2
Road vehicles - Air filters for passenger compartments - Part 2: Test for gaseous filtration First edition
Water Quality - Determination of Selected Organic Plant-Treatment Agents - Automated Multiple Development (AMD) Technique First
ISO
TS 11370
Edition; Corrected and Reprinted:06/01/2001
ISO
TS 11725
Solid Mineral Fuels Determination of Nitrogen Semi-Micro Gasification Method
ISO
TS 12029
Electronic imaging ù Forms design optimization for electronic image management Second Edition
ISO
TS 12033
Electronic Imaging - Guidance for Selection of Document Image Compression Methods First Edition
Road vehicles Gearshift patterns Manual transmissions with power-assisted gearchange and automatic transmissions with manual-
ISO
TS 12104
gearshift mode First Edition
ISO
TS 12180-1
Geometrical Product Specifications (GPS) Cylindricity Part 1: Vocabulary and parameters of cylindrical form First Edition
ISO
TS 12180-2
Geometrical Product Specifications (GPS) Cylindricity Part 2: Specification operators First Edition
Geometrical Product Specifications (GPS) Roundness Part 1: Vocabulary and parameters of roundness First Edition; Replaces ISO
ISO
TS 12181-1
6318
ISO
TS 12181-2
Geometrical Product Specifications (GPS) Roundness Part 2: Specification operators First Edition
ISO
TS 12780-1
Geometrical Product Specifications (GPS) Straightness Part 1: Vocabulary and parameters of straightness First Edition
ISO
TS 12780-2
Geometrical Product Specifications (GPS) Straightness Part 2: Specification operators First Edition
ISO
TS 12781-1
Geometrical Product Specifications (GPS) Flatness Part 1: Vocabulary and parameters of flatness First Edition
ISO
TS 12781-2
Geometrical Product Specifications (GPS) Flatness Part 2: Specification operators First Edition
ISO
TS 12902
Solid Mineral Fuels - Determination of Total Carbon, Hydrogen and Nitrogen - Instrumental Methods First Edition
Lubricants, Industrial Oils and Related Products (Class L) - Family M (Metalworking) - Guidelines for Establishing Specifications First
ISO
TS 12927
Edition
Lubricants, Industrial Oils and Related Products (Class L) - Family R (Products for Temporary Protection Against Corrosion) -
ISO
TS 12928
Guidelines for Establishing Specifications First Edition
ISO
TS 13353
Diesel Fuel and Petrol Filters for Internal Combustion Engines - Initial Efficiency by Particle Counting First Edition
ISO
TS 13399-2
Cutting tool data representation and exchange Part 2: Reference dictionary for the cutting items First Edition
ISO
TS 13399-3
Cutting tool data representation and exchange ù Part 3: Reference dictionary for tool items First Edition
ISO
TS 13399-4
Cutting tool data representation and exchange ù Part 4: Reference dictionary for adaptive items First Edition
ISO
TS 13399-5
Cutting tool data representation and exchange ù Part 5: Reference dictionary for assembly items First Edition
Cutting tool data representation and exchange ù Part 50: Reference dictionary for reference systems and common concepts First
ISO
TS 13399-50
Edition
ISO
TS 13399-60
Cutting tool data representation and exchange ù Part 60: Reference dictionary for connection systems First Edition
ISO
TS 13399-100
Cutting tool data representation and exchange Part 100: Definitions, principles and methods for reference dictionaries First Edition
ISO
TS 13474
Acoustics - Impulse Sound Propagation for Environmental Noise Assessment First Edition
Acoustics - Stationary Audible Warning Devices Used Outdoors - Part 2: Precision Methods for Determination of Sound Emission
ISO
TS 13475-2
Quantities First Edition
ISO
TS 13499
Road Vehicles - Multimedia Data Exchange Format for Impact Tests First Edition
ISO
TS 13571
Life-Threatening Components of Fire - Guidelines for the Estimation of Time Available for Escape Using Fire Data First Edition
ISO
TS 13725
Hydraulic fluid power Cylinders Method for determining the buckling load First Edition
Ergonomics of the Thermal Environment - Methods for the Assessment of Human Responses to Contact with Surfaces - Part 2:
ISO
TS 13732-2
Human Contact with Surfaces at Moderate Temperature First Edition
ISO
TS 13762
Particle Size Analysis - Small Angle X-ray Scattering Method First Edition
Steel Determination of Mo, Nb and W contents in alloyed steel Inductively coupled plasma atomic emission spectrometric method
ISO
TS 13899-1
Part 1: Determination of Mo content First Edition
Steel Determination of Mo, Nb and W contents in alloyed steel Inductively coupled plasma atomic emission spectrometric method
ISO
TS 13899-3
Part 3: Determination of W content First Edition
ISO
TS 14048
Environmental Management - Life Cycle Assessment - Data Documentation Format First Edition
ISO
TS 14167
Gas analysis General quality assurance aspects in the use of calibration gas mixtures Guidelines First Edition
Geometrical Product Specifications (GPS) - Inspection by Measurement of Workpieces and Measuring Equipment - Part 2: Guide to
ISO
TS 14253-2
the Estimation of Uncertainty in GPS Measurement, in Calibration of Measuring Equipment and in Product Verification First Edition
Geometrical Product Specifications (GPS) Inspection by measurement of workpieces and measuring equipment Part 3: Guidelines
ISO
TS 14253-3
for achieving agreements on measurement uncertainty statements First Edition
Soil Quality - Determination of Nitrate, Nitrite and Ammonium in Field-Moist Soils by Extraction with Potassium Chloride Solution -
ISO
TS 14256-1
Part 1: Manual Method First Edition
ISO
TS 14415
Ergonomics of the thermal environment Application of International Standards to people with special requirements First edition
Carbonaceous Materials Used in the Production of Aluminium - Cold-Ramming Pastes - Determination of Effective Binder Content
ISO
TS 14423
and Aggregate Content by Extraction with Quinoline, and Determination of Aggregate Size Distribution First Edition
Carbonaceous Materials Used in the Production of Aluminium - Cold-Ramming Pastes - Determination of Volatile-Matter Content of
ISO
TS 14425
Unbaked Pastes First Edition
Ergonomics of the thermal environment ù Evaluation of thermal environments in vehicles ù Part 1: Principles and methods for
ISO
TS 14505-1
assessment of thermal stress First Edition
ISO
TS 14569-2
Dental materials Guidance on testing of wear Part 2: Wear by two- and/or three body contact First Edition
ISO
TS 14798
Lifts (elevators), escalators and moving walks Risk assessment and reduction methodology Second Edition
Traffic and Travel Information General specifications for medium-range pre-information via dedicated short-range communication
ISO
TS 14822-1
Part 1: Downlink First Edition
Road transport and traffic telematics Electronic fee collection (EFC) Interface specification for clearing between operators First
ISO
TS 14904
Edition
Road transport and traffic telematics Electronic fee collection Test procedures for user and fixed equipment Part 1: Description of
ISO
TS 14907-1
test procedures First Edition
Road transport and traffic telematics Electronic fee collection Test procedures for user and fixed equipment Part 2: Conformance
ISO
TS 14907-2
test for the onboard unit application interface First Edition
ISO
TS 14934-1
Reaction-to-fire tests Calibration and use of radiometers and heat flux meters Part 1: General principles First Edition
ISO
TS 14934-4
Fire tests ù Calibration of heat flux meters ù Part 4: Guidance on the use of heat flux meters in fire tests First Edition
Electronic business eXtensible Markup Language (ebXML) Part 1: Collaboration-protocol profile and agreement specification
ISO
TS 15000-1
(ebCPP) First Edition
ISO
TS 15000-2
Electronic business eXtensible Markup Language (ebXML) Part 2: Message service specification (ebMS) First Edition
ISO
TS 15000-3
Electronic business eXtensible Markup Language (ebXML) Part 3: Registry information model specification (ebRIM) First Edition
ISO
TS 15000-4
Electronic business eXtensible Markup Language (ebXML) Part 4: Registry services specification (ebRS) First Edition
Electronic Business Extensible Markup Language (ebXML) Part 5: ebXML Core Components Technical Specification, Version
ISO
TS 15000-5
2.01(ebCCTS) First Edition
Road vehicles Measurement of driver visual behaviour with respect to transport information and control systems Part 2: Equipment
ISO
TS 15007-2
and procedures First Edition
Tractors and Self-Propelled Machinery for Agriculture and Forestry - Operator Controls - Actuating Forces, Displacement, Location
ISO
TS 15077
and Method of Operation First Edition
Powered Lawn, Garden and Horticultural Equipment - Operator Controls - Guidance on Actuating Forces, Displacement, Location
ISO
TS 15079
and Methods of Operation First Edition
ISO
TS 15510
Stainless Steels - Chemical Composition First Edition
Geometrical Product Specifications (GPS) Coordinate measuring machines (CMM): Technique for determining the uncertainty of
ISO
TS 15530-3
measurement Part 3: Use of calibrated workpieces or standards First Edition
ISO
TS 15539
Cardiovascular Implants - Endovascular Prostheses First Edition
ISO
TS 15624
Transport Information and Control Systems - Traffic Impediment Warning Systems (TIWS) - System Requirements First Ediiton
ISO
TS 15666
Acoustics - Assessment of Noise Annoyance by Means of Social and Socio-Acoustic Surveys First Edition
Mechanical vibration and shock Measurement and evaluation of single shocks transmitted from hand-held and hand-guided
ISO
TS 15694
machines to the hand-arm system First Edition
ISO
TS 15696
Cranes - List of Equivalent Terms Appareils De Levage A Charge Suspendue - Liste De Termes Equivalents First Edition
ISO
TS 15768
Measurement of Liquid Velocity in Open Channels - Design, Selection and Use of Electromagnetic Current Meters First Edition
Hydrometric Determinations - Liquid Flow in Open Channels and Partly Filled Pipes - Guidelines for the Application of Doppler-Based
ISO
TS 15769
Flow Measurements First Edition
Road vehicles ù Test procedures ù Evaluating small female dummy arm and forearm interactions with driver frontal airbags and side
ISO
TS 15827
airbags First Edition
Plastics piping systems for hot and cold water installations Polypropylene (PP) Part 7: Guidance for the assessment of conformity
ISO
TS 15874-7
First Edition
Plastics piping systems for hot and cold water installations Crosslinked polyethylene (PE-X) Part 7: Guidance for the assessment of
ISO
TS 15875-7
conformity First Edition
Plastics piping systems for hot and cold water installations Polybutylene (PB) Part 7: Guidance for the assessment of conformity
ISO
TS 15876-7
First Edition
Plastics piping systems for hot and cold water installations Chlorinated poly(vinyl chloride) (PVC-C) Part 7: Guidance for the
ISO
TS 15877-7
assessment of conformity First Edition
ISO
TS 15883-5
Washer-disinfectors Part 5: Test soils and methods for demonstrating cleaning efficacy First Edition
Industrial automation systems and integration ù Integration of life-cycle data for process plants including oil and gas production
ISO
TS 15926-4
facilities ù Part 4: Initial reference data First Edition
ISO
TS 16058
Health informatics Interoperability of telelearning systems First Edition
ISO
TS 16071
Ergonomics of Human-System Interaction - Guidance on Accessibility for Human-Computer Interfaces First Edition
ISO
TS 16111
Transportable gas storage devices Hydrogen absorbed in reversible metal hydride First Edition
ISO
TS 16332
Diesel engines Fuel filters Method for evaluating fuel/water separation efficiency First Edition
ISO
TS 16431
Hydraulic Fluid Power - Assembled Systems - Verification of Cleanliness First Edition
ISO
TS 16489 CORR 1
Water quality ù Guidance for establishing the equivalency of results TECHNICAL CORRIGENDUM 1 First Edition
ISO
TS 16489
Water quality ù Guidance for establishing the equivalency of results First Edition
ISO
TS 16553
Road vehicles Data cables Test methods and requirements First Edition
ISO
TS 16610-1
Geometrical product specifications (GPS) Filtration Part 1: Overview and basic concepts First Edition
ISO
TS 16610-20
Geometrical product specifications (GPS) Filtration Part 20: Linear profile filters: Basic concepts First Edition
ISO
TS 16610-22
Geometrical product specifications (GPS) Filtration Part 22: Linear profile filters: Spline filters First Edition
ISO
TS 16610-29
Geometrical product specifications (GPS) Filtration Part 29: Linear profile filters: Spline wavelets First Edition
ISO
TS 16610-40
Geometrical product specifications (GPS) Filtration Part 40: Morphological profile filters: Basic concepts First Edition
Geometrical product specifications (GPS) Filtration Part 41: Morphological profile filters: Disk and horizontal line-segment filters First
ISO
TS 16610-41
Edition
ISO
TS 16610-49
Geometrical product specifications (GPS) Filtration Part 49: Morphological profile filters: Scale space techniques First Edition
ISO
TS 16628
Tracheobronchial tubes Recommendations for size designation and labelling First Edition
ISO
TS 16630
Metallic Materials - Method of Hole Expanding Test First Edition
Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of Ô-glucuronidase-positive Escherichia coli -
ISO
TS 16649-3
Part 3: Most probable number technique using 5-bromo-4-chloro-3-indolyl-Ô-Dglucuronide First Edition
ISO
TS 16732
Fire safety engineering - Guidance on fire risk assessment First Edition
ISO
TS 16733
Fire safety engineering Selection of design fire scenarios and design fires First Edition
Rolling Bearings - Dynamic Load Ratings and Rating Life - Discontinuities in the Calculating of Basic Dynamic Load Ratings First
ISO
TS 16799
Edition
ISO
TS 16922
Natural Gas - Guidelines for Odorizing Gases First Edition
Quality management systems Particular requirements for the application of ISO 9001:2000 for automotive production and relevant
ISO
TS 16949
service part organizations Second Edition; Corrected and Reprinted: 12/15/2003
Road vehicles Ergonomic aspects of transport information and control systems (TICS) Procedures for determining priority of on-
ISO
TS 16951
board messages presented to drivers First Edition
ISO
TS 16952-1
Technical product documentation Reference designation system Part 1: General application rules First Edition
ISO
TS 17090-1
Health Informatics - Public Key Infrastructure - Part 1: Framework and Overview First Edition
ISO
TS 17090-2
Health Informatics - Public Key Infrastructure - Part 2: Certificate Profile First Edition
ISO
TS 17090-3
Health Informatics - Public Key Infrastructure - Part 3: Policy Management of Certification Authority First Edition
ISO
TS 17104
Rotary tool for threaded fasteners Hydraulic impulse tools Performance test method First Edition
ISO
TS 17117
Health Informatics - Controlled Health Terminology - Structure and High-Level Indicators First Edition
ISO
TS 17226
Leather Chemical tests Determination of formaldehyde content First edition; IULTCS/IUC 19
ISO
TS 17234
Leather Chemical tests Determination of certain azo colourants in dyed leathers First edition; IULTCS/IUC 20
Intelligent transport systems ù Automatic vehicle and equipment identification ù Intermodal goods transport architecture and
ISO
TS 17261 CORR 1
terminology TECHNICAL CORRIGENDUM 1 First Edition
Intelligent transport systems ù Automatic vehicle and equipment identification ù Intermodal goods transport architecture and
ISO
TS 17261
terminology First edition
ISO
TS 17262
Automatic vehicle and equipment identification Intermodal goods transport Numbering and data structures First Edition
ISO
TS 17263
Automatic vehicle and equipment identification Intermodal goods transport System parameters First Edition
ISO
TS 17369
Statistical data and metadata exchange (SDMX) First edition
ISO
TS 17431
Fire tests Reduced-scale model box test First Edition
TS 17450-1 CORR
Geometrical product specifications (GPS) ù General concepts ù Part 1: Model for geometrical specification and verification
ISO
1
TECHNICAL CORRIGENDUM 1 First Edition
ISO
TS 17450-1
Geometrical product specifications (GPS) General concepts Part 1: Model for geometrical specification and verification First Edition
Geometrical product specifications (GPS) General concepts Part 2: Basic tenets, specifications, operators and uncertainties First
ISO
TS 17450-2
Edition
ISO
TS 17477
Acceptance Tests for CO2-Laser Beam Machines for Welding and Cutting Using 2D Moving Optics Type First Edition
Road Transport and Traffic Telematics Electronic Fee Collection (EFC) Systems architecture for vehicle related transport services
ISO
TS 17573
First Edition
ISO
TS 17574
Road transport and traffic telematics Electronic fee collection (EFC) Guidelines for EFC security protection profiles First Edition
ISO
TS 17576
Dentistry Corrosion tests for amalgam First Edition
ISO
TS 17764-1
Animal feeding stuffs Determination of the content of fatty acids Part 1: Preparation of methyl esters First Edition
ISO
TS 17764-2
Animal Feeding Stuffs - Determination of the Content of Fatty Acids - Part 2: Gas Chromatographic Method First Edition
Welding and allied processes Designation system for imperfections Soudage et techniques connexes Syst×mes de dÚsignation des
ISO
TS 17845
dÚfauts First Edition
ISO
TS 17892-1
Geotechnical investigation and testing Laboratory testing of soil Part 1: Determination of water content First Edition
ISO
TS 17892-2
Geotechnical investigation and testing Laboratory testing of soil Part 2: Determination of density of fine-grained soil First Edition
Geotechnical investigation and testing Laboratory testing of soil Part 3: Determination of particle density Pycnometer method First
ISO
TS 17892-3
Edition
ISO
TS 17892-4
Geotechnical investigation and testing Laboratory testing of soil Part 4: Determination of particle size distribution First Edition
ISO
TS 17892-5
Geotechnical investigation and testing Laboratory testing of soil Part 5: Incremental loading oedometer test First Edition
ISO
TS 17892-6
Geotechnical investigation and testing Laboratory testing of soil Part 6: Fall cone test First Edition
Geotechnical investigation and testing Laboratory testing of soil Part 7: Unconfined compression test on fine-grained soil First
ISO
TS 17892-7
Edition
ISO
TS 17892-8
Geotechnical investigation and testing Laboratory testing of soil Part 8: Unconsolidated undrained triaxial test First Edition
Geotechnical investigation and testing Laboratory testing of soil Part 9: Consolidated triaxial compression tests on water-saturated
ISO
TS 17892-9
soil First Edition
ISO
TS 17892-10
Geotechnical investigation and testing Laboratory testing of soil Part 10: Direct shear tests First Edition
Geotechnical investigation and testing Laboratory testing of soil Part 11: Determination of permeability by constant and falling head
ISO
TS 17892-11
First Edition
ISO
TS 17892-12
Geotechnical investigation and testing Laboratory testing of soil Part 12: Determination of Atterberg limits First Edition
ISO
TS 17996
Cheese Determination of rheological properties by uniaxial compression at constant displacement rate First Edition; IDF/RM 205
ISO
TS 18173
Non-destructive testing General terms and definitions Essais non destructifs Termes gÚnÚraux et dÚfinitions First Edition
Plastics pipes and fittings Reinforced thermoplastics pipe systems for the supply of gaseous fuels for pressures up to 4 MPa (40 bar)
ISO
TS 18226
First Edition
Traffic and Travel Information (TTI) TTI via Transport Protocol Expert Group (TPEG) data-streams Part 1: Introduction, numbering
ISO
TS 18234-1
and versions First Edition
Traffic and Travel Information (TTI) TTI via Transport Protocol Expert Group (TPEG) data-streams Part 2: Syntax, Semantics and
ISO
TS 18234-2
Framing Structure (SSF) First Edition
Traffic and Travel Information (TTI) TTI via Transport Protocol Expert Group (TPEG) data-streams Part 3: Service and Network
ISO
TS 18234-3
Information (SNI) application First Edition
Traffic and Travel Information (TTI) TTI via Transport Protocol Expert Group (TPEG) data-streams Part 4: Road Traffic Message
ISO
TS 18234-4
(RTM) application First Edition
Traffic and Travel Information (TTI) TTI via Transport Protocol Expert Group (TPEG) data-streams Part 5: Public Transport
ISO
TS 18234-5
Information (PTI) application First Edition
Traffic and Travel Information (TTI) TTI via Transport Protocol Expert Group (TPEG) data-streams Part 6: Location referencing
ISO
TS 18234-6
applications First Edition
ISO
TS 18308
Health informatics Requirements for an electronic health record architecture First Edition
ISO
TS 18835
Inhalational anaesthesia systems Draw-over vaporizers and associated equipment First Edition
Industrial automation systems and integration Integration of industrial data for exchange, access and sharing Part 1: Architecture
ISO
TS 18876-1
overview and description First Edition
Industrial automation systems and integration Integration of industrial data for exchange, access and sharing Part 2: Integration and
ISO
TS 18876-2
mapping methodology First Edition
Microbiology of food and animal feeding stuffs Guidelines for the estimation of measurement uncertainty for quantitative
ISO
TS 19036
determinations First Edition
ISO
TS 19103
Geographic information Conceptual schema language First Edition
ISO
TS 19127
Geographic information Geodetic codes and parameters First Edition
ISO
TS 19138
Geographic information Data quality measures First Edition
ISO
TS 19139
Geographic information ù Metadata ù XML schema implementation First Edition
ISO
TS 19218
Medical devices Coding structure for adverse event type and cause First Edition
ISO
TS 19700
Controlled equivalence ratio method for the determination of hazardous components of fire effluents First Edition
ISO
TS 19979
Ophthalmic optics Contact lenses Hygienic management of multipatient use trial contact lenses First Edition
ISO
TS 20022-3
Financial services UNIversal Financial Industry message scheme Part 3: ISO 20022 modelling guidelines First Edition
ISO
TS 20022-4
Financial services UNIversal Financial Industry message scheme Part 4: ISO 20022 XML design rules First Edition
ISO
TS 20022-5
Financial services UNIversal Financial Industry message scheme Part 5: ISO 20022 reverse engineering First Edition
Road Vehicles - Test Method for the Quantification of On-Centre Handling - Determination of Dispersion Metrics for Straight-Line
ISO
TS 20119
Driving First Edition
ISO
TS 20225
Global Medical Device Nomenclature for the Purpose of Regulatory Data Exchange First Edition
ISO
TS 20281
Water quality Guidance on statistical interpretation of ecotoxicity data First edition
ISO
TS 20282-2
Ease of operation of everyday products Part 2: Test method for walk-up-and-use products First Edition
Requirements and Logical Data Model for a Physical Storage Format (PSF) and an Application Program Interface (API) and Logical
ISO
TS 20452
Data Organization for PSF used in Intelligent Transport Systems (ITS) Database Technology First Edition
Electronic Data Interchange for Administration, Commerce and Transport (EDIFACT) Rules for Generation of XML Scheme Files
ISO
TS 20625
(XSD) on the Basis of EDI(FACT) Implementation Guidelines First Edition
Ergonomic procedures for the improvement of local muscular workloads Part 1: Guidelines for reducing local muscular workloads
ISO
TS 20646-1
First Edition
Road Vehicles - Drawbar Couplings, Drawbar Eyes, Fifth Wheel Kingpins, Hook Couplins and Toroidal Eyes - Wear Limits for in-use
ISO
TS 20825
Mecahanical Couplings First Edition
Microbiology of food and animal feeding stuffs - Polymerase chain reaction (PCR) for the detection of food-borne pathogens -
ISO
TS 20836
Performance testing for thermal cyclers First Edition
Gaseous media fire-extinguishing systems Area coverage fire test procedure Engineered and preengineered extinguishing units
ISO
TS 20885
First Edition
ISO
TS 20993
Biological evaluation of medical devices Guidance on a riskmanagement process First Edition
ISO
TS 21091
Health informatics - Directory services for security, communications and identification of professionals and patients First Edition
Foodstuffs Nucleic acid based methods of analysis of genetically modified organisms and derived products Information to be
ISO
TS 21098
supplied and procedure for the addition of methods to ISO 21569, ISO 21570 or ISO 21571 First Edition
ISO
TS 21108
Hand-held power tools Impulse wrenches Dimensions and tolerances of interface to power socket First edition
Soil quality ù Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil materials ù Part 1: Batch test
ISO
TS 21268-1
using a liquid to solid ratio of 2 l/kg dry matter First Edition
Soil quality ù Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil materials Part 2: Batch test
ISO
TS 21268-2
using a liquid to solid ratio of 10 l/kg dry matter First Edition
Soil quality ù Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil materials Part 3: Up-flow
ISO
TS 21268-3
percolation test First Edition
ISO
TS 21432
Non-destructive testing - Standard test method for determining residual stresses by neutron diffraction First Edition
ISO
TS 21609
Road vehicles EMC guidelines for installation of aftermarket radio frequency transmitting equipment First Edition
ISO
TS 21667
Health informatics Health indicators conceptual framework First Edition
ISO
TS 21747
Statistical methods Process performance and capability statistics for measured quality characteristics First Edition
ISO
TS 21748
Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation First Edition
ISO
TS 21749
Measurement and uncertainty for metrological applications Repeated measurements and nested experiments First Edition
Microbiology of food and animal feeding stuffs ù Horizontal method for the detection of potentially enteropathogenic Vibrio spp. ù Part
ISO
TS 21872-1
1: Detection of Vibrio parahaemolyticus and Vibrio cholerae First Edition
Microbiology of food and animal feeding stuffs ù Horizontal method for the detection of potentially enteropathogenic Vibrio spp. ù Part
ISO
TS 21872-2
2: Detection of species other than Vibrio parahaemolyticus and Vibrio cholerae First Edition
Sustainability in building construction Sustainability indicators Part 1: Framework for the development of indicators for buildings First
ISO
TS 21929-1
Edition
Sustainability in building construction Framework for methods of assessment for environmental performance of construction works
ISO
TS 21931-1
Part 1: Buildings First Edition
Food safety management systems ù Requirements for bodies providing audit and certification of food safety management systems
ISO
TS 22003
First Edition
ISO
TS 22004
Food safety management systems Guidance on the application of ISO 22000:2005 First Edition
Photography and graphic technology Extended colour encodings for digital image storage, manipulation and interchange Part 2:
ISO
TS 22028-2
Reference output medium metric RGB colour image encoding (ROMM RGB) First Edition
Photography and graphic technology Extended colour encodings for digital image storage, manipulation and interchange Part 3:
ISO
TS 22028-3
Reference input medium metric RGB colour image encoding (RIMM RGB) First Edition
ISO
TS 22269
Reaction to fire tests Fire growth Full-scale test for stairs and stair coverings First Edition
Geotechnical investigation and testing Sampling methods and groundwater measurements Part 2: Qualification criteria for
ISO
TS 22475-2
enterprises and personnel First edition
Geotechnical investigation and testing ù Sampling methods and groundwater measurements ù Part 3: Conformity assessment of
ISO
TS 22475-3
enterprises and personnel by third party First Edition
ISO
TS 22476-10
Geotechnical investigation and testing Field testing Part 10: Weight sounding test First edition
ISO
TS 22476-11
Geotechnical investigation and testing Field testing Part 11: Flat dilatometer test First edition
ISO
TS 22559-1
Safety requirements for lifts (elevators) Part 1: Global essential safety requirements (GESRs) First Edition
ISO
TS 22595-1
Dentistry Plant area equipment Part 1: Suction systems First Edition
ISO
TS 22600-1
Health informatics Privilege management and access control Part 1: Overview and policy management First Edition
ISO
TS 22600-2
Health informatics Privilege management and access control Part 2: Formal models First Edition
ISO
TS 22911
Dentistry Preclinical evaluation of dental implant systems Animal test methods First Edition
ISO
TS 22964
Milk and milk products Detection of Enterobacter sakazakii First Edition
ISO
23081-1
Information and documentation Records management processes Metadata for records Part 1: Principles First Edition
Information and documentation ù Records management processes ù Metadata for records ù Part 2: Conceptual and implementation
ISO
TS 23081-2
issues First Edition
Geometrical product specifications (GPS) Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty
ISO
TS 23165
First Edition
ISO
TS 23810
Cardiovascular implants and artificial organs Checklist for preoperative extracorporeal circulation equipment setup First Edition
ISO
TS 24154
Hydrometry Measuring river velocity and discharge with acoustic Doppler profilers First Edition
ISO
TS 24155
Hydrometry ù Hydrometric data transmission systems ù Specification of system requirements First Edition
Ophthalmic optics ù Spectacle frames ù Method for the simulation of wear and detection of nickel release from metal and
ISO
TS 24348
combination spectacle frames Second Edition
Traffic and Travel Information (TTI) TTI via Transport Protocol Experts Group (TPEG) Extensible Markup Language (XML) Part 1:
ISO
TS 24530-1
Introduction, common data types and tpegML First Edition
Traffic and Travel Information (TTI) TTI via Transport Protocol Experts Group (TPEG) Extensible Markup Language (XML) Part 2:
ISO
TS 24530-2
tpeg-locML First Edition
Traffic and Travel Information (TTI) TTI via Transport Protocol Experts Group (TPEG) Extensible Markup Language (XML) Part 3:
ISO
TS 24530-3
tpeg-rtmML First Edition
Traffic and Travel Information (TTI) TTI via Transport Protocol Experts Group (TPEG) Extensible Markup Language (XML) Part 4:
ISO
TS 24530-4
tpeg-ptiML First Edition
Petroleum, petrochemical and natural gas industries Composite repairs for pipework Qualification and design, installation, testing
ISO
TS 24817
and inspection First Edition
ISO
TS 25238
Health informatics ù Classification of safety risks from health software First Edition
ISO
TS 25377
Hydrometric uncertainty guidance (HUG) First Edition
ISO
TS 26844
Milk and milk products Determination of antimicrobial residues Tube diffusion test First Edition; IDF/RM 215
ISO
TS 28923
Agricultural machinery ù Guards for moving parts of power transmission ù Guard opening with tool First Edition
ISO
TS 28924
Agricultural machinery ù Guards for moving parts of power transmission ù Guard opening without tool First Edition
Petroleum, petrochemical and natural gas industries Sector-specific quality management systems Requirements for product and
ISO
TS 29001
service supply organizations First Edition/Cobranded with API SPEC Q1
ISO
TTA 1
Advanced Technical Ceramics - Unified Classification System First Edition
ISO
TTA 2
Tensile Tests for Discontinuously Reinforced Metal Matrix Composites at Ambient Temperatures First Edition
ISO
TTA 3
Polycrystalline Materials - Determination of Residual Stresses by Neutron Diffraction First Edition
ISO
TTA 4
Measurement of thermal conductivity of thin films on silicon substrates First Edition
ISO
TTA 5
Code of practice for creep/fatigue testing of cracked components First Edition
|