Computerized Embroidery Machine Controller BECS-A15. OWNER’S MANUAL

Contents

Chapter 1 General Information

1.1 Warnings and Cautions

.......... 1

1.2 Main Features

.......... 3

1.3 Technical Specifications

.......... 6

Chapter 2 Embroidery

Guide

2.1 Structure and Usage

Instruction of Control Panel

.......... 7

2.2 Instruction

of the Main Interface

.......... 8

2.3 Basic Procedure of Embroidery

........ 15

2.4 Normal Embroidery,

Returning and Patching

........ 19

2.5 Embroidery

Operation

........ 19

2.6 Thread-Breakage Detection

........ 19

2.7 Working Status

........ 20

Chapter 3 U Disk Management

3.1 Select U Disk

........ 22

3.2 Pattern Preview

........ 24

3.3 Pattern Input

........ 25

3.4 Directory Operation

........ 26

3.5 Formatting

U Disk ..

........ 26

3.6 Delete Objects from

U Disk (including pattern file and directory)

........ 27

3.7 Create a New Directory in the

Current Directory

........ 28

Chapter 4 Common Parameters

and Color-Changing Order

4.1 Settings of

Common

Parameters

........ 29

4.1.1. Settings of X-Y Scale

4.1.2. Settings of Rotate Angle

4.1.3. Pattern Direction

4.1.4. Prior Mode

4.1.5. Rep. Mode

4.1.6. Rep. Order

4.1.7. X-Y Rep. Times

4.1.8. X-Y Rep. Interval

4.2 Settings of Color-changing Order

4.2.1. Color-changing Interface

4.2.2. Settings of Color-Changing Order

4.2.3. Set Needle Bar Color

Chapter 5 Settings of Embroidery Parameters

5.1 Procedure for Setting General Parameters

5.2 Instruction on Some Functions within General Parameters

5.2.1. Cyclic Embroidery Function

5.2.2. Brake Adjustment (A Must for New Machine)

Chapter 6 Memory Pattern Management

6.1 Memory Pattern Management Interface and Other Memory Pattern

Operation Interfaces

6.2 Select Pattern for Embroidery

6.3 Memory Pattern Preview

6.4 Pattern Output

6.5 Copy the Memory Pattern

6.6 Create Outline Pattern

........ 48

6.7 Create High-speed Pattern

........ 48

6.8 Divide Pattern

........ 48

6.9 Create Parameter Pattern

........ 49

6.10

Mosaic Pattern

........ 50

6.11

Create Combined Pattern

........ 51

6.12

Satin Stitch Adjustment

........ 54

Chapter 7 Letter Pattern Operation

7.1 Enter Main

Interface

for Letter Embroidery

........ 55

7.2 Input Letter String for Embroidery

........ 55

7.3 Adjust Letter Pattern

........ 56

7.4 Save Letter

Pattern..

........ 60

Chapter 8 Assistant Operation

8.1 Frame Selection

........ 62

8.2 Clear XY Displacement

........ 63

8.3 Positioning

Idling

........ 63

8.3.1. Low Speed Idling

Forward..

...........63

8.3.2. Low Speed Idling

Backward

...........64

8.3.3. High

Speed Idling Forward .

...........64

8.3.4. Go to

Next Color

...........64

Chapter 9 Other Functions

9.1 Statistics ...

........ 65

9.2 Set Frame

Origin

........ 67

III

9.3 Language

9.4 Machine Information

9.5 Machine Debugging

9.6 Date and Time

9.7 Touch Screen Correction

Chapter 10 Online Update of Main Software

Chapter 11 Update of Software in Peripheral Board

Appendix 1 Parameter List

Appendix 2 Directions of U Disk Operation

Appendix 3 Automatic Position Limitation Function Instructions for

Apparel Embroidery

Appendix 4 A15 Controller Operation Quick Guide

There will be no further notice in case of any change of specifications.

Chapter

1 Ge

neral Information

Thank you for using Dahao Computerized Control System

for Embroidery Machine.

Please

read this manual carefully so as to operate the machine

correctly and effectively.

Besides that, you

should keep

this manual properly

for future use.

1.1 Warnings and Cautions

order to avoid fire, electrical shock or unpredicted injuries, you should follow

the listed

safety rules.

Matters for Attention on Usage

During the operation, do not try to open the

machine box. The high voltage

Danger

contained in some parts is deadly. The rotating parts may cause serious injury.

Forbidden

Don't expose the machine

to humidity gas, poisonous gas,

water, and dust.

Don’t store or

operate the

machine in the vibration area, which may cause trouble

Forbidden

the machine

Attention

Please abide all the warnings and safety requirements to ensure the security.

Attention

LCD screen is

fragile. Do

not use the hard or sharp item to

click the screen.

Please insert U

disk correctly and don’t force it

in, otherwise, USB interface or U

Attention

disk may get damaged

Wewill add appendix if

necessary. If there is any difference between

the manual

Attention

and

appendix,

the content in the appendix shall

take precedence.

Matters

for Attention on Transportation

and Loading

Attention

When moving

the machine, please not to hold the cable.

Attention

Please abide all the warnings and safety requirements to ensure the security.

Compulsory

Overloading may cause

serious loss. Please load according to the instruction on

the

box

Requirements

Matters for Attention on Installation

Don't jam the vent on the device. Don’t insert other items into the machine, or it

Attention

may get fire.

Attention

Make sure the installation direction is correct.

Don't expose the machine to humidity gas, corrosive gas, water, and other

Attention

flammable material.

Matters for Attention on Cable Connection

Forbidden

Don't test the insulation of the circuit loop.

Never try to connect the overloaded electronic device on the connectors (like

Forbidden

sockets or terminals).

The insulation condition of each cable (no matter signal cable or power cable)

Attention

should be ensured.

Attention

The signal cables and power cables should be separated. Never tie them together.

All the cables should be well fixed. Don’t put any strength on cables. Make sure

Attention

each turning point of cable is well protected. Add shelter pipes to increase

insulating capability if necessary.

Machine should be grounded reliably. The resistance should be smaller than 10

Attention

Matters for Attention on Operation

Don't operate the machine when there is any damage on the shelter of the running

Danger

parts.

Forbidden

When machine is running, do not touch any running part.

Make sure the configuration of power supply is in normal. Use stabilized voltage

Attention

power supply when the change of voltage is beyond the range of -10%~10%.

In case of warning, please check out the problem. Operation can only be carried

Attention

out again when problem is solved.

The power supply switch has over-current protection function. If the over-current

Attention

switch is activated, the switch can only be closed after 3 minutes.

Matters

for Attention on Maintenance and Inspection

If you need to

open the

machine cover, please

cut off the

power supply at first

Warning

Due to the capacitance, operator must wait at least one minute before

opening the

machine cover.

Circuit boards can be

damaged by static. The circuit

boards can only be

Attention

disassembled

by professional technicians.

If machine is

inactive for

a while temporarily,

users must

power on the machine

Attention

regularly (once by every

2 or 3 days, more than

an hour for

each time)

machine is

inactive for a long time, users should have

the machine checked

Attention

before power-on.

Matters for Attention on Rejection

Rejection should obey

the rules

and regulations set

by national industrial

Attention

electronic standards.

1.2 Main Features

User-friendly Interface on Touching Panel

The adoption

of the touching panel technology offers user the delightful operation and

easy learning. The

beautiful screen display turns everyday work

into joyful experiences.

Huge Memory Capacity

The memory

capacity reaches 100 million stitches, which

can meet demands of

different

customers.

Maximum

Stitch Amount of One

Pattern Reaches Two

Million

present a single pattern in the system has the

maximum

of 2 million stitches and 1,000

times of

automatic

color changing.

Multi-Task

Parallel Operation and Free Shift among Tasks

During the embroidery, actions like

pattern input & output, preparation for the

following

patterns

and modification of parameters can be carried out.

Storage of

Frequently

Used Parameters and

Color-Changing Order

for Each Pattern

Pattern will be saved along with its parameters, color-changing orders and needle bar

colors.

System can

save the operational details for each pattern. Users can set parameters for a

pattern during the embroidery process of the previous pattern, which will save time and

improve efficiency. Moreover, it is one basis to realize network management.

Pattern Input/Output via USB

Customers can use USB disk for data transfer. USB disk supports DIR operation, which is

easy for pattern management. For each directory, system supports operation of 400 patterns or

sub-directory. There is no limitation of directory levels. Patterns in the formats of Binary,

Ternary and Z-nary can be loaded.

Patch Embroidery

This function can set a patch point at the position of color code or stop code, and when the

machine embroiders to the patch point, it will halt and move out frame for patching. After

sticking a patch, user would press the start key to return the frame and continue embroidering.

Brake Adjustment

User can adjust the parameter of brake to let the main shaft stop at the correct position

according to the characters of his own machines.

Save Start Point

This function can save the start point of each pattern, which saves the work of user to

search the start point manually at embroidering the identical pattern.

10.

Mechanical Maintainence and Debugging

This function is to easily judge the malfunctions at maintaining and debugging the

machine, such as encoder testing, main shaft speed testing, machine parts testing and the main

shaft stopping at any position, etc.

11.

Multi-Language Support

Currently, the system only supports Chinese and English; Arabic, Spanish, Turkish,

Russian, Portuguese, French and many other languages are under developing.

12.

Pattern Output

Patterns can be output and saved into USB disk. Adoption of TAJIMA’s binary format

enjoys the advantage of data transmitting through the World Wide Web (other formats may not

be transmitted directly).

13.

Repetition

Embroidery

The user can

increase

embroidery

productivity by using the function of

repetition

embroidery, which

can also be

used with

cyclic embroidery.

14.

Cyclic Embroidery

With this function, the machine can

automatically return

to the origin and start

the same

embroidery again

when finishing the pattern one

time. User

also can increase productivity

rapidly

by combining this

function with special pattern-making function or

repetition

embroidery function.

15.

Pattern Compiling

(1)

Compiling

the Data of Selected Pattern to Generate New Pattern

Users can compile any pattern according to zoom ratio, rotate angle,

normal repetition or

partial repetition to

generate a

new pattern and save

it to memory. The newly generated pattern

can be used for embroidering,

output or other operations.

(2)

Compiling

the Combined Pattern

After setting the combined pattern, the system

can compile that pattern to generate a new

one and

save it to

memory. The newly generated pattern can be used for embroidering, output

or other

operations

16.

Letter Pattern

There are 28 built-in font libraries. Users can make letter

groups and

change letter orders

according to different tasks. This operation is vivid, simple and

easy managing.

17.

Pattern Edit (under developing)

18.

Speed Adjustment

The highest speed for embroidery can be preset. During

embroidery, speed may change

automatically along

with the change of needle interval.

19.

Thread-trimming

Thread-trimming can be manually operated. The machine can trim the thread

automatically at the

end of embroidery process or at color-changing.

20.

Thread-breakage Detection

In case of thread breakage or running-out of bobbin thread, the machine will stop and give

warning by indicator.

21.

Color-changing

At the color-changing point, user can either perform the color-changing manually or let

the system do it automatically according to the preset order.

1.3 Technical Specifications

Maximum number of patterns saved in memory: 800

Memory capacity: 100 million stitches

Screen resolution ratio: 1280*800

Network port speed: 100Mbps

Supported method for data exchange: USB disk, network (temporarily unavailable)

Control precision: Minimum controllable stitch interval is 0.1mm

Stitch range: 0.1mm~12.7mm

Chapter 2 Em

broidery Guide

2.1 Structure and Usage Instruction of Control Panel

Structure

of Control

Panel

1. Touching Panel

It adopts high-luminance

LCD displayer and

touching screen man-machine

interaction

interface.

2. Buttons

Press

the keys to

start the embroidery,

pause the embroidery.

3. Main USB Port

USB

disk can be

plugged for data input/output.

II. Instructions on Touching Panel

This machine

uses the touching panel as its input device. In order to extend the service

life of the panel and to maintain its performance, please don’t

apply too much pressure on the

screen during operation. Neither can user

use the sharp or hard tools to click the screen

III. Instructions on USB

Disk

Please pay close attention to electrostatic phenomenon.

Don’t forget to discharge (we

suggest

you should

touch the

machine stand or frame to discharge the static) before

plugging

in/out the USB disk

Pay

attention

to the direction of the USB disk

at plug-in. Don’t pull out the USB disk

when system loads

data from

or write data to it. If the USB disk is pulled out or the

power is

cut off during the

data input/output, the

data could

be lost. In that case, please check the

integrity

of data in the USB disk and repair

it before using.

Attention: During the process of initialization, if the power

is cut off

or the USB

disk is

pulled out, the USB

disk may be damaged

permanently.

2.2 Instruction

of the Main Interface

No.

Icon

Name

Description

Reference Page

Network

Status

(disconnected

Connection

, conne

, successful

Failure

registration

Status

Cyclic embroidery

is currently

available.

Press user parameter

or specialist parameter

Cyclic

Embroidery

enter the parameter

setting interface, where user can

change the setting

of cyclic

embroidery.

This figure will appear when

the

Thread Breakage

machine

stops due to

the

thread-breakage.

No.

Icon

Name

Description

Reference Page

Pattern

Interface

for pattern

management

Management

Parameter

Interface

for parameter setting

Setting

Color-changing

Interface

for color-changing order

Order

Setting

setting

Main

Interface

Main interface

Pattern Display

The pattern for embroidery will be

Area

displayed

in this area.

Basic

Pattern

Basic data of the

current pattern

Data

will be displayed here.

Clear

X/Y

Clear the current

value of

X/Y

Displacement

displacement

After machine stop,

user can click

Manual

this key

for the

operation

Section 2.3

Thread-trimming

manual thread-trimming (including

bobbin thread trimming).

After stop, if the main shaft is

not

Main

Shaft

at the proper position

Manual

Section 2.3

press this key to adjust the main

Adjustment

shaft to the right position

Frame

Selection

Frame selection and

position

and Position

If the machine is

set at Auto

Color-changing, user should

set

the color-changing order

advance.

When user presses the start key

for

embroidery, no matter where

the

Auto

current

needle rod

locates,

the

Color-changing,

machine

will change the needle

Auto

Start

according to the set

color-changing

order and

perform the embroidery.

When

encountering

color-changing code, the machine

will stop

automatically and shift to

the pointed needle position

according

the

auto

No.

Icon

Name

Description

Reference Page

color-changing order.

the

machine

is set at auto start,

the

machine will begin the embroidery

automatically; if it is

set at manual

start, the

user needs

to press

the

start key for embroidery.

In this status, select the needle

position

with

manual

color-changing

(

) to select

the needle

position and then press

start key for embroiery.

When

encountering

color-changing code, the machine

Manual

will stop

automatically. Icon

Color-changing,

Manual Start

appears, and

the system

awaits the

manual color-changing

At this moment, user needs

perform

manual color-changing

(

)

to shift to

the needed

needle position, and

press the start

key for embroidery

Return

Return to

the previous interface

For setting the

main shaft

Main

Shaft

acceleration/deceleration.

When

Acceleration,

the main

shaft

reaches

the

Main

Shaft

highest/lowest speed, this key will

Deceleration

be unavailable.

Used to

move the frame

Idling

appointed

position

without

embroidery

When the

machine

is in Ready

Status,

user can

carry out

preparation

work

the

Embroidery

embroidery, such

as pattern

Ready

Status,

selection,

setting scale parameter,

setting repetition parameters and

Confirm

the

so on. Click this key to confirm,

Embroidery

and the machine will turn from

Embroidery

Ready

Status

into

Embroidery

No.

Icon

Name

Description

Reference Page

Confirmation Status

Currently, the machine is under

Embroidery Confirmation Status,

and user

can start

embroidery

any time. When the

machine stops,

Embroidery

user can

click this key and confirm

Confirmation

the cancelling of Embroidery

Status,

Cancel

Confirmation Status. And

the

machine

will return

to Embroidery

the Embroidery

Ready

Status

from

Embroidery Confirmation Status

Press it

to enter the interface

for

other function operations, such

statistic

inquiry,

frame origin

Other

Function

setting,

power-off

recovery,

soft

Chapter 9

Operations

limitation

setting,

machine

authority

management, touch

screen

calibration,

and time

management.

When machine stops at correct

position

, the operation

Manual

valid; pr

enter manual

Section 2.3

Color-changing

color-cha

interface, where

user ca

corresponding

needle p

number to make

color-cha

This figu

or the actual needle

Current

Needle

position

sent

0 is for

the

Position

invalid ne

osition.

The initi

ue is

1. After

the

Current

embroide

rts,

this value

will

Color-changing

add 1 at

finish

of successful

Times

color-cha

This orde

he sequence of

the

Color-changing

needle r

or changing color.

Order

The 3D

is for the current

needle po

Scale up

ern

in the pattern

display a

old

pressing for 2s

Scale

Up Pattern

to shift to

No.

Icon

Name

Description

Reference Page

Manual

The frame will move along with

Frame-moving

the direction keys.

No.

Icon

Name

Description

Reference Page

Display patterns by figures for

Pattern List

users to select

Previous/Next

Display patterns in different pages

Page

Used to check pattern details, scale

Memory Pattern

up/down pattern, move or make

Preview

analog display of pattern

Letter pattern and its parameter

Letter Pattern

setting

Pattern Deletion

Used to delete selected patterns

Used to transfer memory patterns to

Pattern Output

USB disk

Home

Press it to enter the U disk

U Disk

management

interface

for

Management

operations related to U disk.

Used to open other operation

Other Functions

interfaces for memory patterns,

such as pattern copy, deletion,

No.

Icon

Name

Description

Reference Page

combination, edit, etc.

Single/Multiple

Shift between single selection mode

Selection

and multiple selection

mode

Enter the next operation interface

No.

Icon

Name

Description

Reference Page

Common

User can adjust these

parameters

Parameter

control the

final embroidery effect

Setting

of the pattern.

Load the

selected pattern, display

Pattern

Preview

the pattern

data and

draw up the

pattern shape.

No.

Icon

Name

Description

Reference Page

Current Operation

Set, insert or delete needle bar number

Position

here.

Color

Lump

Display the color lump number of the

Number List

pattern

Display the needle bar number and

Needle

Bar

needle bar thread color of the

Number and Color

corresponding color lump

Move up the color-changing list in order to

Move Up

select the color lump to be set

Press this key and then press needle bar

Insert Needle Bar

number to insert it to the current needle

Number

bar number list

Delete Needle Bar

Delete the current needle bar number

Number

from the needle bar number list

Move down the color-changing list in

Move Down

order to select the color lump to be set

Needle

Bar

Select the color for the selected needle

Number

Color

bar number

Selection Area

Repetition

Repeat the color-changing order

Patch Embroidery

Set as patch embroidery pattern

No.

Icon

Name

Description

Reference Page

Needle Bar Color

Set the neeble bar color from default

Setting

colors

2.3 Basic Procedure of

Embroidery

The machine

carries out embroidery based

on the patterns saved in memory. The

following figure is

the basic procedure of

the embroidery:

Input Patterns

Select Pattern

Assistant Operations

Confirm Embroidery

Start Embroidery

Cancel Embroidery

Manual Operation

Input Patterns

User can input patternss

through network or

USB disk. Only with

(successful

registration) displayed, can

it be possible to transmit patternss by network. For U disk

operation, in pattern management interface, press

to enter U

disk management

interface.

II.

Select Pattern

In pattern management interface, user can select needed pattern for embroidery.

III. Assistant Operations

After selecting

the pattern

for embroidery, user can make assistant operations according to

need before embroidery.

Set repetition, rotation and scaling ——

press

to enter parameter

management interface.

Set color-changing orde

—— press

to enter color-changing

setting interface.

Set patch embroidery —— press

to enter color-changing

setting

interface and set patch embroidery of the pattern

according

to hints.

For border inquiry, border

idling, pattern outline

—— press

to enter

frame selection and position operation.

Locate

pattern at

frame center —— press to enter

frame selection and

position

operation. Please note this function

is to locate pattern at the frame

center set

by soft

limitation.

Set cyclic embroidery ——

press

to enter other

function operation.

Press

to enter

parameter

management interface. Then press

“Embroidery

Assistant Parameters” and

set cyclic

embroidery

according

to hints.

IV.

Confirm Embroidery

1. After assistant operations, press

to display

a hint window, where

user can

select

to confirm and turn

(cancel embrodery) to

(confirm embroidery), which indicates the machine has entered Embroidery

Ready

Status.

If user selects

, the machine

will stay at

Embroidery Cancel Status. At this time,

the

machine will not work even when user presses the start key. A

hint window will

display on the

screen for user to confirm the embroidery.

Set Color-changing and Start Mode

User can shift

between

(auto

color-changing and auto start) and

(manual

color-changing and manual start).

Manual Operation

Manual Thread-trimming:

When the machine stops, press

in the main interface to

display a

hint window, where user can

press “Trim Upper&Bobbin Thread” to trim

threads,

or click “Trim Bobbin Thread” to trim

the bobbin

thread only. Press

quit the thread-trimming operation.

Manual Frame-Moving:

When the machine stops,

press direction keys (

)

to move

frame along the corresponding direction. Press the two

neighboring keys at

the same

time to move the frame in the

direction of

the angle

bisector.

the speed key for

manual frame-moving. Press to

shift between

(high

speed) and

(low speed).

Clear

the Frame Coordinates

When the machine stops,

press

to clear the XY displacements

displayed

in the main interface. The function can be used with manual frame-moving.

Manual Color-Changing

When the machine stops,

press

in the

main interface to enter manual

color-changing interface. Then

click the needle number for color-changing, and the

machine head will automatically

move to the corresponding needle position.

Please note: if

the user wants to automatically

save the order of the manual

color-changing, user

should operate it in the manual color-changing interface on the

touch screen.

Adjust

Main Shaft

Manually

Usually, the main shaft needs to stop at

100° at needle/color-changing,

frame-moving and beginning embroidery. User can manually turn

the main

shaft to

100° when

it hasn’t reached there. Press

in the main interface to carry out

this function.

After

the operation,

(not in

position) will changing into

(in

position).

Back to

Origin

Press

in the main

interface to enter idling interface, where user can

press

to return the frame to origin.

Back to

Stop Point

Press

in the main

interface

to enter idling interface, where user can

press

to return the frame to stop point.

Positioned Idling

Use this

function after embroidery confirmation. Positioned

idling enables the

machine to

move to

the appointed position

without embroidering according to the

user’s requests. Press

to set

idling backward or forward

at the

color-changing code or stop code

by one stitch or continuously.

VI.

Cancel Embroidery

When the machine stops, press

display a

hint window, where user can

select

to turn

(embroidery confirmation) to

(cancel

embroidery confirmation).

2.4 Normal Embroidery, Returning and

Patching

embroidery

confirmation status

(

is displayed), press

to start normal

embroidery, and during embroidery, press

to stop embroidery.

When the machine stops,

press

to return the frame back along with the original

embroidery path;

one press,

one stitch back; hold pressing for

2s to return continuously, even

without holding

; press

again to stop.

The purpose of returning

is for patching, and when the machine stops returning, press

to start normal embroidery.

2.5 Embroidery Operation

When the machine stops,

press

to start embroidery;

When the machine is embroidering,

press

to stop embroidery.

2.6 Thread-Breakage Detection

Based on different working principles, thread-breakage

detection

devices have three

types: thread take-up spring type, thread winding wheel (chopper wheel) type and mixed type.

For thread take-up spring type, it detects the thread-breakage by searching connection of

take-up

spring and

contact point. When thread breaks, the spring

will close

to the contact point.

In normal condition, this detecting type is sensitive

to the face

thread breakage, but can hardly

detect bobbin thread run-out.

. In case you change the embroidery thread, or thread tension

Chapter

Embroidery

Guide

changes,

you need

to adjust spring pressure between the take-up spring

and contact point.

When the spring pressure is too large, there will be

False Alarm; when the

spring pressure is

too small, there will

be MissingAlarm.

For thread winding wheel type, it judges thread-breakage by

detecting

the winding wheel

angle. It

is very sensitive in case of face thread breakage; in

most cases of bobbin

thread

run-out,

the consumption of face thread will reduce,

as a result,

system will judge by

statistic

method and send out warning.

Though it can almost

avoid False

Positive, it is not as sensitive

as the spring-type.

For the mixed type method, the two

can complement each

other with their advantages,

which results in sensitive and stabilized detecting effect.

2.7 Working Status

There are three

working statuses:

Embroidery

Ready Status

preset parameters, choose embroidery

patterns and make other preparation

work for embroidery.

Embroidery

Confirmation status

confirm the parameter settings to

enter the quasi-running status.

Embroidery

Running Status

embroidery.

Shift among these three working statuses:

In embroidery

ready status (

is displayed in the

main interface), if users have

selected

pattern and

related parameters, press

and then press

confirm,

and the system will

enter embroidery confirmation status (

is displayed in the main

interface). At this

time, press

start key

to start embroidery,

when the

machine is under

embroidery running

status (

is displayed in the

main interface).

In embroidery running status (

is displayed in the main interface), press stop key to

Chapter

2 Embroidery

Guide

stop embroidery and return to

embroidery confirmation status,

where user can press

start key

again to

enter embroidery running status.

embroidery

confirmation status

(

is displayed in the main interface), press

and then

press

to confirm, user can release the confirmation status and

return to

embroidery ready status (

is displayed in the main interface).

Chapter 3 U Disk Management

In U disk management interface, user can input patternss from U disk to machine, and

vise versa; meanwhile, user can undertake some common U disk managements, like erasing

file or directory, initializing the disk, etc. User can save patterns data under different directories

of the U disk based on different types. Patterns formats like DSB, DST and DSZ can be read by

the system. For data output, patterns will be saved in the U disk as DSB format.

3.1 Select U Disk

Since the system supports several storage devices, user need select the U disk for operation.

Press

in pattern management interface.

System will display “Select U Disk” window, where user need select U disk by

pressing corresponding icon.

In this window all the storage devices will be displayed. Their information includes the

icon, words and numbers. The icon is the device type. Icon

indicates U disk. The

words are the label of the U disk (if the U disk has no label, the default letter will be used), and

the number refers to the U disk’s digital symbol.

Chapter

U Disk Management

Enter

U disk operation interface.

No.

Icon

Name

Description

Display the pattern files

and file folders within

the U

File List

disk in icons. It’s used to select files.

Page

The current page number and total

page number

Information

Back to

Upper

Return to upper level

Level

Basic

Pattern

Display the basic data of current pattern

Data

Load the selected pattern. Check

its details, scale

Pattern

up/down the

pattern,

and move

or make

analog

Preview

display of the pattern.

Create

Create new file folder

Computerized Embroidery Machine Controller BECS-A15. OWNER’S MANUAL - page 1