Volkswagen Passat / Passat Variant (2011 year). Service manual - part 34

member in area of the factory-fitted bonds using compressed

air gun -V.A.G 1761/1- .

Passat 2011 ➤ , Passat Variant 2011 ➤

3. Renewing roof (Variant)    

133

190 MKD A3- -1- using pneumatic cartridge gun -

V.A.G 1761/1- .

♦ Dimension -a- = approx. 12 mm
♦ Dimension -b- = approx. 9 mm

Passat 2011 ➤ , Passat Variant 2011 ➤

134

of roof parallel to left and right roof flange with pneumatic car‐

tridge gun -V.A.G 1761/1- .

♦ Dimension -a- = approx. 4 mm
♦ Dimension -b- = approx. 9 mm

Note

♦

The application time (pot life) of the 2K body adhesive -D 180

KD3 A2- is approx. 90 min.

♦

Remove excessive 2K body adhesive -D 180 KD3 A2- from

bonding areas immediately. Once cured 2K body adhesive -D

180 KD3 A2- can only be removed using mechanical means.

♦

An assistant is required for the following work.

Passat 2011 ➤ , Passat Variant 2011 ➤

3. Renewing roof (Variant)    

135

bead cross-section.

– Carefully operate double cartridge gun -VAS 5237- without

static mixer until adhesive is discharged uniformly from both

chambers of cartridge connector.

– Screw static mixer onto cartridge connector.
– Apply the first 100 mm of adhesive to a piece of cardboard and

only then begin to apply the adhesive to the vehicle.

– Fill area -1- with 2K body adhesive -D 180 KD3 A2- using

double cartridge gun -VAS 5237- .

Passat 2011 ➤ , Passat Variant 2011 ➤

136