|
|
5AT(diag)-31 Diagnostic Procedure for Subaru Select Monitor Communication AUTOMATIC TRANSMISSION (DIAGNOSTICS) 10 CHECK INSTALLATION OF TRANSMISSION Is the transmission harness Go to step 11. Connect the bulk- 11 CHECK POOR CONTACT IN CONNECTORS. Is there poor contact in control module power supply and data Repair the poor Go to step 12. 12 CHECK POWER SUPPLY OF TCM. Connector & terminal (B55) No. 24 (+) — Chassis ground (–): Is the voltage 10 — 13 V? Go to step 15. Go to step 13. 13 CHECK FUSE (NO. 12). Is the fuse (No. 12) blown out? Replace the fuse (No. 12). Go to step 14. 14 CHECK HARNESS. Connector & terminal (B55) No. 24 — Chassis ground: Is the resistance 10 : or less? Replace the fuse (No. 12). If the Go to step 15. 15 CHECK IGNITION POWER SUPPLY CIR- Connector & terminal (B55) No. 17 (+) — Chassis ground (–): Is the voltage 10 — 13 V? Go to step 17. Go to step 16. 16 CHECK FUSE (NO. 21). Is the fuse (No. 21) blown out? Replace the fuse (No. 21). If the Go to step 17. 17 CHECK HARNESS CONNECTOR BETWEEN Connector & terminal (B55) No. 22 — Transmission ground: Is the resistance 1 M : or more? Repair the short Go to step 18. 18 CHECK POOR CONTACT IN CONNECTORS. Is there poor contact in TCM power supply, ground and data Repair the connec- Replace the TCM. Step Check Yes No |