4AT(diag)-117
AUTOMATIC TRANSMISSION (DIAGNOSTICS)
Diagnostic Procedure with Diagnostic Trouble Code (DTC)
Step
Check
Yes
No
1
CHECK BODY INTEGRATED MODULE.
1) Connect the Subaru Select Monitor to data
link connector.
2) Turn the ignition switch to ON. (engine
OFF)
3) Read the DTC of body integrated module
using Subaru Select Monitor. <Ref. to
LAN(diag)-14, OPERATION, Subaru Select
Monitor.>
Is DTC displayed?
Perform the diag-
nosis according to
DTC.
Go to step 2.
2
CHECK BODY INTEGRATED MODULE IN-
PUT SIGNAL.
1) Shift the select lever to “P” range.
2) Read the Tiptronic Mode Switch data of
body integrated module using Subaru Select
Monitor. <Ref. to LAN(diag)-14, OPERATION,
Subaru Select Monitor.>
Is OFF displayed?
Go to step 3.
Go to step 7.
3
CHECK BODY INTEGRATED MODULE IN-
PUT SIGNAL.
1) Shift the select lever from “P” to “D” range.
2) Read the Tiptronic Mode Switch data of
body integrated module using Subaru Select
Monitor. <Ref. to LAN(diag)-14, OPERATION,
Subaru Select Monitor.>
Is the indication on each range
OFF?
Go to step 4.
Replace the select
lever assembly.
<Ref. to CS-22,
Select Lever.>
4
CHECK BODY INTEGRATED MODULE IN-
PUT SIGNAL.
1) Shift the select lever to manual mode side.
2) Shift the select lever to any other than “D”
range.
3) Read the Tiptronic Mode Switch data of
body integrated module using Subaru Select
Monitor. <Ref. to LAN(diag)-14, OPERATION,
Subaru Select Monitor.>
Is OFF displayed?
Go to step 5.
Replace the select
lever assembly.
<Ref. to CS-22,
Select Lever.>
5
CHECK INHIBITOR SWITCH.
Shift the select lever from “P” to “D” range.
Is the indication of range posi-
tion indicator light in combina-
tion meter synchronized with
position of select lever?
Go to step 6.
Adjust the inhibi-
tor switch and
select cable. <Ref.
to 4AT-51,
ADJUSTMENT,
Inhibitor Switch.>
<Ref. to CS-30,
ADJUSTMENT,
Select Cable.>
6
CHECK TCM INPUT SIGNAL.
1) Shift the select lever from “P” to “D” range.
2) Read the Tiptronic Mode Switch data of
TCM using Subaru Select Monitor. <Ref. to
4AT(diag)-16, OPERATION, Subaru Select
Monitor.>
Is the indication on each range
OFF?
Even if the SPORT
indicator light is
blinking, the cir-
cuit has returned
to normal condi-
tion at this time. A
temporary short
circuit of connector
or harness may be
the cause. Repair
the harness or
connector.
Replace the TCM.
<Ref. to 4AT-66,
Transmission Con-
trol Module
(TCM).>