|
|
● Do not push the sunshade arm with your hands, etc., as this may deform it. ● Do not put any object into the sunshade inlet port as this may result in improper ● Do not hang any object on the arm rail as this may result in improper operation ● Do not forcefully pull the sunshade. Do- ing so may elongate the sunshade. Im- Restarting the sunshade switch If the sunshade does not operate properly, per- 1. Switch the vehicle ignition to the ACCES- SORY or RUN mode. 2. Press and hold the sunshade close switch. 3. Sunshade will begin moving towards the close position only while the switch is con- 4. Sunshade will stop for about 4 seconds. 5. Sunshade drive cable will travel in the open direction for .394 in. (10 mm) then reverse 6. Release the sunshade close switch. Initial- ization procedure is complete. If the moonroof does not operate properly after Auto-reverse function (when closing The auto-reverse function can be activated when Depending on the environment or driving WARNING There are some small distances immedi- the vehicle before closing the sunshade. 2-60 Instruments and controls |