Hyundai Veloster (2019 year). Manual

This warning light remains ON

Electronic Stability

after blinking for approximately 60

Control (ESC) Indicator

Control (ESC) OFF

seconds, or repeatedly blinks ON

Light

Indicator Light

and OFF in 3 second intervals:

• When there is a malfunction with

This indicator light illuminates:

the TPMS.

• When you place the ignition switch

In this case, have the vehicle inspect-

to the ON position.

ed by an authorized HYUNDAI deal-

- The Electronic Stability Control

- It illuminates for approximately

er as soon as possible.

indicator light illuminates for

3 seconds and then goes off.

For more details, refer to "Tire

about 3 seconds and then goes

• When you deactivate the ESC sys-

Pressure Monitoring System

off.

tem by pressing the ESC OFF but-

(TPMS)" in chapter 6.

• Whenever there is a malfunction

ton.

with the ESC system.

For more details, refer to

WARNING

If this occurs, have the vehicle

"Electronic Stability Control (ESC)"

inspected by an authorized

in chapter 5.

Safe Stopping

HYUNDAI dealer.

• The TPMS cannot alert you to

severe and sudden tire dam-

This indicator light blinks:

age caused by external fac-

• While the ESC is operating.

tors.

For more details, refer to

• If you notice any vehicle insta-

"Electronic Stability Control (ESC)"

bility, immediately take your

in chapter 5.

foot off the accelerator pedal,

apply the brakes gradually

with light force, and slowly

move to a safe position off the

road.

3-51

Convenient features of your vehicle

Immobilizer Indicator

This indicator light illuminates for

Light (without smart

Light (with smart key

2 seconds and goes off:

key) (if equipped)

(if equipped)

• If the smart key is in the vehicle

and the Engine Start/Stop button is

ON, but the vehicle cannot detect

This indicator light illuminates:

This indicator light illuminates for

the smart key.

up to 30 seconds:

• When the vehicle detects the

In this case, have the vehicle inspect-

immobilizer in the key with the igni-

• When the vehicle detects the

ed by an authorized HYUNDAI deal-

tion switch in the ON position.

smart key in the vehicle with the

er.

- At this time, you can start the

Engine Start/Stop button in the

ACC or ON position.

engine.

- Once the smart key is detected,

This indicator light blinks:

- The indicator light goes off after

starting the engine.

you can start the engine.

•

When the battery voltage of the

- The indicator light goes off after

smart key is low.

starting the engine.

- If this occurs, you will not be able

This indicator light blinks:

to start the engine by simply

• When there is a malfunction with

pressing the Start/Stop button.

the immobilizer system.

This indicator light blinks for a few

However, you can still start the

seconds:

In this case, have the vehicle

engine by pressing the Start/Stop

• When the smart key is not in the

inspected by an authorized

button directly with the smart key.

HYUNDAI dealer.

vehicle.

(Refer to "Starting the Engine"

- If the smart key is not detected,

in chapter 5.)

you cannot start the engine.

•

When there is a malfunction with

the immobilizer system.

In this case, have the vehicle

inspected by an authorized

HYUNDAI dealer.

3-52

Turn Signal Indicator

High Beam Indicator

Light ON Indicator

Light

This indicator light illuminates:

This indicator light blinks:

This indicator light illuminates:

•

When the tail lights or headlights

• When you operate the turn signal

• When the headlights are on and in

are on.

indicator stalk.

the high beam position

• When the turn signal lever is pulled

If any of the following occur, there may

into the Flash-to-Pass position.

be a malfunction with the turn signal

system.

- The turn signal indicator light illumi-

nates but does not blink

- The turn signal indicator light blinks

rapidly

- The turn signal indicator light does

not illuminate at all

If any of these conditions occur, have

your vehicle inspected by an author-

ized HYUNDAI dealer.

3-53

Convenient features of your vehicle

LED Headlight Warning

High Beam Assist

Icy Road Warning Light

Light (if equipped)

(HBA) indicator light

(if equipped)

This warning light illuminates:

This indicator light illuminates :

This warning light is to warn the driver

• When you place the ignition switch

• When the high-Beam is on with the

the road may be icy.

or the Engine Start/Stop button to

light switch in the AUTO light posi-

When the outside temperature

the ON position.

tion.

gauge reads below 40°F (4°C), the

• When there is a malfunction with

• If your vehicle detects oncoming or

Icy Road Warning Light and Outside

the LED headlight.

preceding vehicles, the High Beam

Temperature Gauge blinks and then

Assist (HBA) system will switch the

If this occurs, have the vehicle

illuminates. Also, the warning chime

inspected by an authorized

high beam to low beam automati-

sounds 1 time.

cally.

HYUNDAI dealer.

For more details, refer to "High

Information

Beam Assist (HBA) system" in this

This warning light blinks:

If the icy road warning light illumi-

chapter.

When there is a malfunction with a

nates while driving, it means that the

LED headlight related part.

outside temperature has reduced and

In this case, have the vehicle inspect-

that the road conditions may be icy.

As a precaution you should reduce

ed by an authorized HYUNDAI dealer.

your speed and drive more carefully

and with greater attention to the road

NOTICE

conditions.

Continuous driving with the LED

Headlight Warning Light on or

blinking can reduce LED headlight

life.

3-54

Cruise Indicator Light

SPORT Mode Indicator

SMART Mode Indicator

(if equipped)

Light

Light (if equipped)

60$57

This indicator light illuminates:

• When the cruise control system is

• When you select "SPORT" mode

• When you select ''SMART" mode

enabled.

as drive mode.

For more details, refer to "Cruise

For more details, refer to "Drive

Control System" in chapter 5.

Mode Integrated Control System"

Mode Integrated Control System''

in chapter 5.

3-55

Convenient features of your vehicle

Forward Collision-

Lane Keep Assist

LCD Display Messages

Avoidance Assist (FCA)

Indicator Light

Shift to P or N to start engine

System Warning Light

(for smart key system)

This warning message is displayed if

This warning light illuminates :

This indicator light illuminates:

you try to start the engine with the

• When you set the ignition switch

•

[Green] When you activate the lane

shift lever not in the P (Park) or N

or Engine Start/Stop button to the

departure warning system by

(Neutral) position.

ON position.

pressing the LKA button and all of

the system operating conditions

- It illuminates for approximately 3

Information

are satisfied.

seconds and then goes off.

You can start the engine with the shift

•

[White] When system operating

• When there is a malfunction with

lever in the N (Neutral) position. But,

conditions are not satisfied or

FCA. In this case, have your vehicle

for your safety, we recommend that

when the sensor does not detect

inspected by an authorized dealer of

you start the engine with the shift

the lane line.

HYUNDAI.

lever in the P (Park) position.

•

[Yellow] When there is a malfunc-

tion with the lane keeping assist

For more details, refer to "Forward

system.

Shift to P

Collision-Avoidance Assist (FCA) sys-

(for smart key system)

In this case, have your vehicle

tem" in chapter 5.

inspected by an authorized HYUNDAI

This message is displayed if you try

dealer.

to turn off the engine without the shift

lever in P (Park) position.

For more details, refer to "Lane

Keeping Assist (LKA) system" in

If this occurs, the Engine Start/Stop

button turns to the ACC position (If

chapter 5.

you press the Engine Start/Stop but-

ton once more, it will turn to the ON

position).

3-56

Low key battery

Press clutch pedal to start

Key not detected

(for smart key system)

engine (for smart key system

(for smart key system)

This warning message is displayed if

and manual transmission)

This warning message is displayed if

the battery of the smart key is dis-

This warning message is displayed if

the smart key is not detected when you

charged while changing the Engine

the Engine Start/Stop button

press the Engine Start/Stop button.

Start/Stop button to the OFF position.

changes to the ACC position twice

by pressing the button repeatedly

Press START button again

without depressing the clutch pedal.

Press brake pedal to start

(for smart key system)

You can start the engine by depress-

engine (for smart key system

ing the clutch pedal to.

This message is displayed if you

and automatic transmission/

were unable to start the vehicle when

dual clutch transmission)

the Engine Start/Stop button was

Key not in vehicle

This warning message is displayed if

pressed.

(for smart key system)

the Engine Start/Stop button

If this occurs, attempt to start the

changes to the ACC position twice

This warning message is displayed if

engine by pressing the Engine Start/

by pressing the button repeatedly

the smart key is not in the vehicle

Stop button again.

without depressing the brake pedal.

when you press the Engine Start/

If the warning message appears

Stop button.

You can start the vehicle by depress-

each time you press the Engine

ing the brake pedal and then press-

When attempting to start the vehicle,

Start/Stop button, have your vehicle

ing the Engine Start/Stop button.

always have the smart key with you.

inspected by an authorized

HYUNDAI dealer.

3-57

Convenient features of your vehicle

Battery discharging due to

Press START button with key

Door, Hood, Liftgate Open

external electrical devices

(for smart key system)

Indicator

This message is displayed if the bat-

This warning message is displayed if

tery voltage is weak due to any non-

you press the Engine Start/Stop but-

factory electrical accessories

(ex.

ton while the warning message "Key

dashboard camera) while parking.

not detected" is displayed.

Be careful that the battery is not dis-

At this time, the immobilizer indicator

charged.

light blinks.

If the warning message appears

after removing the non-factory elec-

Check BRAKE SWITCH fuse

trical accessories, we recommend

(for smart key system)

that you have the vehicle inspected

by an authorized HYUNDAI dealer.

This warning message is displayed if

the brake switch fuse is disconnected.

OJS048111

You need to replace the fuse with a

This warning is displayed if any door

new one before starting the engine.

or the hood or the liftgate is left open.

If that is not possible, you can start

The warning will indicate which door

the engine by pressing the Engine

is open in the display.

Start/Stop button for 10 seconds in

the ACC position.

CAUTION

Before driving the vehicle, you

should confirm that the door/

hood/liftgate is fully closed.

Also, check there is no door/

hood/liftgate open warning light

or message displayed on the

instrument cluster.

3-58

Sunroof Open (if equipped)

Low Pressure (if equipped)

Turn FUSE SWITCH on

OJS048112

OJS048115L

OOS047142L

This warning is displayed if you turn

This warning message is displayed if

off the engine when the sunroof is

the tire pressure is low. The corre-

the fuse switch located on the fuse

open.

sponding tire on the vehicle will be

box under the steering wheel is OFF.

illuminated.

Close the sunroof securely before

The fuse switch is turned OFF to

leaving your vehicle.

For more details, refer to "Tire

minimize battery draw when the

Pressure Monitoring System

vehicle is in storage or in transporta-

(TPMS)" in chapter 6.

tion where the vehicle will not be

operated for some time.

Under normal conditions, the fuse

switch should be set to the ON posi-

tion.

For more details, refer to "Fuses"

in chapter 7.

3-59

Convenient features of your vehicle

Lights Mode

Wiper

Low washer fluid

This warning message is displayed

if the washer fluid level in the reser-

voir is nearly empty.

Have the washer fluid reservoir refilled.

Low fuel

This warning message is displayed if

the fuel tank is almost out of fuel.

When this message is displayed, the

low fuel level warning light in the

cluster will come on.

OPD047120L

OIK047146L

It is recommended to look for the

This indicator displays which exterior

This indicator displays which wiper

nearest fueling station and refuel as

light is selected using the lighting

speed is selected using the wiper

soon as possible.

control.

Add fuel as soon as possible.

Engine overheated

This warning message is displayed

when the engine coolant tempera-

ture is above

248°F (120°C). This

means that the engine is overheated

and may be damaged.

If your vehicle is overheated, refer

to "If the Engine Overheats" in

chapter 6.

3-60

Check headlight

Check Forward Collision

Check Lane Keeping Assist

This warning message is displayed if

Avoidance Assist system

(LKA) system

the headlights are not operating

This warning message is displayed if

properly. A headlight bulb may need

there is a malfunction with the

there is a problem with the Check

to be replaced.

Forward Collision-Avoidance Assist

Lane Keeping Assist (LKA) system.

(FCA) system. Have the vehicle

Have the vehicle inspected by an

inspected by an authorized

authorized HYUNDAI dealer.

Information

HYUNDAI dealer.

For more details, refer to "Check

Make sure to replace the burned out

For more details, refer to "Forward

Lane Keeping Assist (LKA) sys-

bulb with a new one of the same wattage

Collision-Avoidance Assist (FCA)

tem" in chapter 5.

rating.

system" in chapter 5.

Check High Beam Assist (HBA)

Check Driver Attention Warning

system (if equipped)

(DAW) system

This warning message is displayed if

there is a problem with the High Beam

there is a problem with the Driver

Assist (HBA) system. Have the vehi-

Attention Warning (DAW). Have the

cle inspected by an authorized

vehicle inspected by an authorized

HYUNDAI dealer.

For more details, refer to "High

For more details, refer to "Driver

Beam Assist (HBA) system" in

Attention Warning (DAW)" in chap-

chapter 3.

ter 5.

3-61

LCD Display Modes

Modes

Symbol

Explanation

This mode displays driving information such as the tripmeter, fuel economy, etc.

Trip Computer

For more details, refer to "Trip Computer" in this chapter.

Turn By Turn (TBT)

This mode displays the state of the navigation.

(if equipped)

This mode displays the state of :

- Smart Cruise Control

- Lane Keeping Assist (LKA) system

- Driver Attention Warning (DAW) system

Assist

- Tire pressure

For more details, refer to "Smart Cruise Control", "Lane Keeping Assist (LKA)",

"Driver Attention Warning (DAW)" in chapter 5 and "Tire Pressure Monitoring

System (TPMS)" in chapter 6.

The User Settings menu provides user options for a variety of settings including door

User Settings

lock/unlock features, convenience features, driver assistance settings, etc.

The Warning mode displays warning messages related to the vehicle when one or

Warning

more systems is not operating normally.

The information provided may differ depending on which functions are applicable to your vehicle.

3-63

Convenient features of your vehicle

Shift to P to edit settings

Trip computer mode

Turn By Turn (TBT) mode

This warning message appears if

you try to adjust the User Settings

while driving.

- Manual transmission

For your safety, change the User

Settings after parking the vehicle,

applying the parking brake and mov-

ing the shift lever to neutral.

- Automatic transmission /

dual clutch transmission

For your safety, change the User

OPD047464N

OPDE046147R

Settings after parking the vehicle,

applying the parking brake and mov-

The trip computer mode displays

This mode displays the state of the

ing the shift lever to P (Park).

information related to vehicle driving

navigation.

parameters including fuel economy,

tripmeter information and vehicle

Quick guide help

speed.

This mode provides quick guides for

For more details, refer to "Trip

the systems in the User Settings

Computer" in this chapter.

mode.

Select an item, press and hold the OK

button.

For more details about each sys-

tem, refer to this Owner's Manual.

3-64

Assist mode

Warning mode

If one of followings occurs, warning

messages will be displayed on the

LCD display for several seconds.

Low washer fluid

Exterior lamp malfunction

(if equipped)

Blind-Spot Collision Warning (BCW)

system malfunction (if equipped)

Tire Pressure Monitoring System

OJS048115L

(TPMS)

Tire Pressure

High Beam Assist (HBA) malfunc-

OJS048118N

This mode displays information relat-

tion (if equipped)

SCC/LKA/DAW

ed to Tire Pressure.

Forward Collision-Avoidance Assist

This mode displays the state of the

(FCA) malfunction (if equipped)

Smart Cruise Control (SCC), Lane

For more details, refer to "Tire

Pressure Monitoring System

Keeping Assist

(LKA) and Driver

Attention Warning (DAW).

(TPMS)" in chapter 6.

For more details, refer to each

system in chapter 5.

3-65

Convenient features of your vehicle

User settings mode

1. Head-Up Display

In this mode, you can change the

Items

Explanation

settings of the instrument cluster,

doors, lamps, etc.

Display height

To adjust the height of the image displayed

1. Head-up display

2. Driver Assistance

Rotation

To adjust the angle of the image displayed.

3. Door

4. Lights

Brightness

To adjust the brightness of the image displayed.

5. Sound

To select the content to be displayed.

6. Convenience

Content Selection

- Blind-spot safety info

7. Service interval

To change the head-up display to SPORT drive specified contents

8. Other

(ex. rpm, speed, gear position, etc.). Select the mode the vehicle has

9. Language

SPORT display

been set.

10. Reset

- Enable in SPORT mode

- Enable in manual shift mode

The information provided may differ

depending on which functions are

To select the speedometer size displayed.

applicable to your vehicle.

Speed Size

- Large/Medium/Small

To select the speedometer color displayed.

Speed Color

- White/Orange/Green

For more details, refer to "Head-Up Display" in this chapter.

3-66

2. Driver Assistance

Items

Explanation

To adjust the sensitivity of the Smart Cruise Control system.

- Fast/Normal/Slow

SCC Reaction

For more details, refer to ''Smart Cruise Control'' in chapter 5.

To adjust the sensitivity of the Driver Attention Warning.

- High Sensitivity / Normal Sensitivity / Off

Driver Attention Warning

For more details, refer to the "Driver Attention Warning (DAW) System" in chapter 5.

To adjust the Lane Keeping Assist function.

- Active LKA / Standard LKA / Lane Departure Warning

Lane Safety

For more details, refer to the "Lane Keeping Assist (LKA) system" in chapter 5.

To activate or deactivate the Forward Collision-Avoidance Assist system.

Forward Collision-Avoidance Assist

For more details, refer to the "Forward Collision-Avoidance Assist (FCA) System" in chapter 5.

To adjust the initial warning alert time for Forward Collision-Avoidance Assist (FCA) system.

- Early / Normal / Late

Forward Collision Warning

For more details, refer to "Forward Collision Avoidance Assist (FCA) System" in chapter 5.

To activate or deactivate the Rear Cross-Traffic Collision Warning function.

Rear Cross-Traffic Collision Warning

For more details, refer to "Blind-Spot Collision Warning (BCW) System" in chapter 5.

To activate or deactivate the Blind- Spot Collision Warning sound.

Blind-Spot Collision Warning Sound

For more details, refer to "Blind-Spot Collision Warning (BCW) System" in chapter 5.

3-67

Hyundai Veloster (2019 year). Manual - part 8