Honda Accord (2019 year). Manual - part 7

96

uu

Indicators

u

In

strum

e

nt Pa

nel

Indicator

Name

On/Blinking

Explanation

Message

Security System 
Alarm Indicator

• Blinks when the security system 

alarm has been set.

2 Security System Alarm P. 184

—

System 
Message 
Indicator

• Comes on along with a beep when 

a problem is detected. A system 
message on the driver information 
interface appears at the same time.

• While the indicator is on, press the 

 

(home) button to see the message again.

2 Accessing contents in the main 

display P. 138

• Refer to the Indicators information in this 

chapter when a system message appears 
on the driver information interface. Take 
the appropriate action for the message.

• The driver information interface does not 

return to the normal screen unless the 
warning is canceled, or the left selector 
wheel is pressed.

—

Indicator

97

uu

Indicators

u

Continued

In

strum

e

nt Pa

nel

*1:Models without the adaptive damper system
*2:Models with the adaptive damper system

Indicator

Name

On/Blinking

Explanation

Message

ECON Mode 
Indicator

• Comes on when you press the 

ECON button.

2 ECON Button P. 492

*1

*2

98

uu

Indicators

u

In

strum

e

nt Pa

nel

*1:Models without the adaptive damper system
*2:Models with the adaptive damper system

Indicator

Name

On/Blinking

Explanation

Message

SPORT Mode 
Indicator

*

• Comes on when you press the 

SPORT button.

• The ambient meter remains lit up in 

red as long as SPORT mode is on.

2 SPORT Mode

*

 P. 491

*1

*2

* Not available on all models

99

uu

Indicators

u

Continued

In

strum

e

nt Pa

nel

Indicator

Name

On/Blinking

Explanation

Message

Adaptive 
Cruise Control 
(ACC) with Low 
Speed Follow 
(LSF) Indicator 
(Amber)

*

/ 

Adaptive 
Cruise Control 
(ACC) Indicator 
(Amber)

*

●

Comes on if there is a problem with 
ACC with LSF

*

/ACC

*

.

●

Stays on constantly - Have your vehicle 
checked by a dealer.

●

Comes on if the ACC with LSF

*

/

ACC

*

 is deactivated temporarily 

after the battery has been 
disconnected, then re-connected.

●

Drive a short distance at more than 12 mph 
(20 km/h). The indicator should go off. If it 
does not, have your vehicle checked by a 
dealer.

●

Indicator may come on temporarily 
when the Maximum Load Limit is 
exceeded.

●

ACC with LSF

*

/ACC

*

 has been 

automatically canceled.

●

Make sure the total load is within the 
Maximum Load Limit.

2 Maximum Load Limit P. 457

—

* Not available on all models

100

uu

Indicators

u

In

strum

e

nt Pa

nel

Indicator

Name

On/Blinking

Explanation

Message

Adaptive 
Cruise Control 
(ACC) with Low 
Speed Follow 
(LSF) Indicator 
(Green)

*

/ 

Adaptive 
Cruise Control 
(ACC) Indicator 
(Green)

*

●

Comes on when you press the 
MAIN button.

2 Adaptive Cruise Control (ACC) with 

Low Speed Follow (LSF)

*

 P. 519

2 Adaptive Cruise Control (ACC)

*

 

P. 535

—

Lane Keeping 
Assist System 
(LKAS) 
Indicator 
(Amber)

●

Comes on if there is a problem with 
the LKAS.

●

Stays on constantly - Have your vehicle 
checked by a dealer.

Lane Keeping 
Assist System 
(LKAS) 
Indicator 
(Green)

●

Comes on when you press the 
MAIN button.

2 Lane Keeping Assist System (LKAS) 

P. 550

—

* Not available on all models

101

uu

Indicators

u

Continued

In

strum

e

nt Pa

nel

Indicator

Name

On/Blinking

Explanation

Message

Safety Support 
Indicator 
(Amber)

●

Comes on if there is a problem with 
RDM, CMBS

TM

, or the blind spot 

information system

*

.

●

Stays on constantly - Have your vehicle 
checked by a dealer.

●

Comes on if the RDM and CMBS

TM

 

are deactivated temporarily after 
the battery has been disconnected 
and then re-connected.

●

Drive a short distance at more than 12 mph 
(20 km/h). The indicator should go off. If it 
does not, have your vehicle checked by a 
dealer.

* Not available on all models

102

uu

Indicators

u

In

strum

e

nt Pa

nel

Indicator

Name

On/Blinking

Explanation

Message

Safety Support 
Indicator 
(Amber)

●

Comes on when RDM and/or 
CMBS

TM

 shuts itself off.

●

Indicator may come on temporarily when 
passing through an enclosed space, such 
as tunnel.

●

The area around the radar sensor is 
blocked by dirt, mud, etc. Stop your 
vehicle in a safe place and wipe the debris 
off with a soft cloth.

●

Have your vehicle checked by a dealer if 
the indicator does not go off even after 
you have cleaned the radar sensor.

2 Collision Mitigation Braking 

System

TM

 (CMBS

TM

) P. 510

●

Stays on - The temperature inside the 
camera is too high.
Use the climate control system to cool 
down the camera.
The system activates when the 
temperature inside the camera cools 
down.

2 Front Sensor Camera P. 568

* Not available on all models

103

uu

Indicators

u

Continued

In

strum

e

nt Pa

nel

Indicator

Name

On/Blinking

Explanation

Message

Safety Support 
Indicator 
(Amber)

●

Comes on when RDM and/or 
CMBS

TM

 shuts itself off.

●

Stays on - The area around the camera is 
blocked by dirt, mud, etc. Stop your 
vehicle in a safe place and wipe the debris 
off with a soft cloth.

●

Have your vehicle checked by a dealer if 
the indicator and message are still 
displayed even after you have cleaned the 
area around the camera.

2 Front Sensor Camera P. 568

●

Comes on when mud, snow, or ice 
has accumulated in the vicinity of 
the blind spot information system 
sensor.

●

Comes on while driving - Something 
may be interfering with the blind spot 
information system sensor. Check the 
vicinity of the blind spot information 
system sensor and remove any obstacles.

2 Blind spot information System

*

 

P. 502

●

Indicator may come on temporarily 
when the Maximum Load Limit is 
exceeded.

●

Make sure the total load is within the 
Maximum Load Limit.

2 Maximum Load Limit P. 457

—

Models with the blind spot 
information system

* Not available on all models

104

uu

Indicators

u

In

strum

e

nt Pa

nel

Indicator

Name

On/Blinking

Explanation

Message

Safety Support 
Indicator 
(Green/Gray)

●

Lights up in green when RDM, 
CMBS

TM

, and the blind spot 

information system

*

 are on.

●

Lights up in green and gray when 
RDM, CMBS

TM

, or the blind spot 

information system

*

, or any two of 

these systems are off.

●

Lights up in gray when RDM, 
CMBS

TM

, and the blind spot 

information system

*

 are off.

2 RDM On and Off P. 560
2 CMBS

TM

 On and Off P. 513

2 Blind spot information System On 

and Off P. 504

* Not available on all models

105

uu

Indicators

u

Driver Information Interface Warning and Information Messages

Continued

In

strum

e

nt Pa

nel

Driver Information Interface Warning and Information Messages

The following messages appear only on the driver information interface. Press the 

 (home) button, select Warnings, then press the left 

selector wheel to see the message again with the system message indicator on.

Message

Condition

Explanation

●

Appears when the vehicle is no longer able to run 
due to a malfunction.

●

Immediately stop in a safe place.

●

Have your vehicle checked by a dealer immediately.

●

Appears when there is a risk that the vehicle will 
move unexpectedly after you have stopped due to a 
malfunction with the vehicle.

●

While the vehicle is stopped, apply the parking brake.

●

Have your vehicle checked by a dealer.

●

Appears when you set the power mode to ON again 
and the vehicle is able to run.

2 Starting the Engine P. 465

Automatic transmission models

106

uu

Indicators

u

Driver Information Interface Warning and Information Messages

In

strum

e

nt Pa

nel

Message

Condition

Explanation

• Appears if any door or the trunk is not completely 

closed.

• Appears if any door or the trunk is opened while 

driving. The beeper sounds.

• Disappears when all doors and the trunk are closed.

• Appears when the engine oil pressure is low.

• Appears while driving - Immediately stop in a safe 

place.

2 If the Low Oil Pressure Warning Appears P. 681

107

uu

Indicators

u

Driver Information Interface Warning and Information Messages

Continued

In

strum

e

nt Pa

nel

Message

Condition

Explanation

• Appears if there is a problem with the shutter grille, 

and the radiator coolant temperature is too high.

• Power output will be reduced, so you may not be able 

to accelerate or maintain your current speed. Have your 
vehicle checked by a dealer.

●

Appears when the washer fluid is low.

●

Refill the washer fluid.

2 Refilling Window Washer Fluid P. 630

●

Appears when the scheduled maintenance is due 
soon.

●

Consequently, Maintenance Due Now and 
Maintenance Past Due follow.

2 Maintenance Minder Messages on the Driver 

Information Interface P. 609

●

Appears when there is a problem with the sensor on 
the battery.

●

Have your vehicle checked by a dealer.

2 Checking the Battery P. 651

●

Appears along with the battery charging system 
indicator when the battery is not charging.

●

Turn off the climate control system and rear defogger to 
reduce electricity consumption.

2 If the Charging System Indicator Comes On P. 681

Models with shutter grille

Canadian models

108

uu

Indicators

u

Driver Information Interface Warning and Information Messages

In

strum

e

nt Pa

nel

Message

Condition

Explanation

●

Appears when the engine coolant temperature gets 
abnormally high.

2 Overheating P. 679

●

Appears if the automatic brake hold is automatically 
canceled while it is in operation.

●

Immediately depress the brake pedal.

Automatic transmission/
Continuously variable 
transmission models

Manual transmission 
models

109

uu

Indicators

u

Driver Information Interface Warning and Information Messages

Continued

In

strum

e

nt Pa

nel

Message

Condition

Explanation

●

Appears when the automatic brake hold system is 
turned off.

2 Automatic Brake Hold P. 577

●

Appears when the automatic brake hold button is 
pressed without wearing the driver’s seat belt.

●

Fasten the driver’s seat belt.

2 Automatic Brake Hold P. 577

110

uu

Indicators

u

Driver Information Interface Warning and Information Messages

In

strum

e

nt Pa

nel

Message

Condition

Explanation

●

Appears when the automatic brake hold button is 
pressed without depressing the brake pedal while 
the automatic brake hold is in operation.

●

Press the automatic brake hold button with the brake 
pedal depressed.

2 Automatic Brake Hold P. 577

●

Appears when the parking brake is applied 
automatically while it is in operation.

2 Automatic Brake Hold P. 577
2 Parking Brake P. 571

Automatic transmission/
Continuously variable 
transmission models

Manual transmission 
models

111

uu

Indicators

u

Driver Information Interface Warning and Information Messages

Continued

In

strum

e

nt Pa

nel

Message

Condition

Explanation

●

Appears when the electric parking brake switch is 
pressed without depressing the brake pedal while 
the electric parking brake is in operation.

●

Press the electric parking brake switch with the brake 
pedal depressed.

2 Parking Brake P. 571

Automatic transmission/
Continuously variable 
transmission models

Manual transmission 
models